?? gx1101.c
字號:
/*******************************************************************************************
Copyright(C) 2004 , HANGZHOU GUOXIN SCIENCE AND TECHNOLOGY CO.,LTD, all right reserved.
Product : DVB-S_GX1101 Demo Software
Date : 2005.09.14
Author : Guoxin
Purpose : Drive GX1101
*******************************************************************************************/
#include "gx1101.h"
#include "dvb_replace.h"
/*******************************************************************************************/
/* Global variables */
static u8 u8ChipID; // 01:GX1101
#ifdef DVB_TUNER_MAX2118
static u8 tuner_device_id = MX2118_DEVICE_ID;
u8 byte[6] = {0x03, 0xb6, 0x3d, 0x7f, 0x02, 0x0a};//CP=3,DL=0
#else
static u8 tuner_device_id;
#endif
unsigned int Baud;//KHz
unsigned char ChannelCount =0;
static bool8 b8InitSuccess=FALSE;
/*******************************************************************************************
Function : gx1101_Initial()
Description : Initial GX1101 Device
Input : none
Output : b8InitSuccess
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Initial(void)
{
GX1101_STATUS status;
u8 buffer[2];
u8 i;
u8ChipID = 0;
for(i = 0;i< 5;i++)
{
buffer[0] = 0x00;
buffer[1] = 0x00;
gx1101_Write_Registers(0x02, buffer, 2, FALSE);
delay_ms(20);
buffer[0] = 0xc0;
buffer[1] = 0xb3; //90.5MHz
gx1101_Write_Registers(0x02, buffer, 2, FALSE);
delay_ms(10);
}
buffer[0] = 0x80; //90.5MHz
buffer[1] = 0x5a;
gx1101_Write_Registers(0x63, buffer, 2, FALSE);
if ((status = gx1101_Read_Registers(GX1101_ID, buffer, 1, FALSE)) != GX1101_NO_ERROR)
return GX1101_CB_ERROR;
if (buffer[0] == GX1101_CHIP_ID)
{
u8ChipID = buffer[0];
}
else
{
return GX1101_CB_ERROR;
}
buffer[0] = 0x3c;
gx1101_Write_Registers(GX1101_CRL_PARA, buffer, 1, FALSE);
buffer[0] = 0x07;
gx1101_Write_Registers(GX1101_GPOP0, buffer, 1, FALSE);
buffer[0] = 0x10;
gx1101_Write_Registers(GX1101_TRL_PARA, buffer, 1, FALSE);
buffer[0] = 0x72;
gx1101_Write_Registers(0x66, buffer, 1, FALSE);
//buffer[0] = 0xb4;
//gx1101_Write_Registers(GX1101_IQ_SWAP, buffer, 1, FALSE);
b8InitSuccess=TRUE;
return GX1101_NO_ERROR;
}
/*******************************************************************************************
Function : gx1101_Write_Registers()
Description : Write registers via Serial 2-Wire Control Bus
Input : u8Address,*pu8Buffer,no_of_bytes,cb_tuner_access_on
Output : none
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Write_Registers(u8 u8Address, u8 *pu8Buffer, u8 no_of_bytes, bool8 cb_tuner_access_on)
{
u8 i;
u8 u8Deviceid;
u8Deviceid = GX1101_DEVICE_ID;
if (cb_tuner_access_on)
{
u8Address=*pu8Buffer;/*because write tuner don't need register address*/
pu8Buffer++;
no_of_bytes--;
u8Deviceid=tuner_device_id;
}
if ( DVB_CB_Write_Burst (u8Deviceid, u8Address, pu8Buffer, no_of_bytes)==FALSE )
return GX1101_CB_ERROR;
return GX1101_NO_ERROR;
}
/*******************************************************************************************
Function : gx1101_Read_Registers()
Description : Read registers via Serial 2-Wire Control Bus
Input : u8Address,*pu8Buffer,no_of_bytes,cb_tuner_access_on
Output : none
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Read_Registers(u8 u8Address, u8 *pu8Buffer, u8 no_of_bytes, bool8 cb_tuner_access_on)
{
u8 u8Deviceid= GX1101_DEVICE_ID;
if (cb_tuner_access_on)
u8Deviceid = tuner_device_id;
else
u8Deviceid = GX1101_DEVICE_ID;
if (!cb_tuner_access_on)
{
if (DVB_CB_WriteNoStop (u8Deviceid, u8Address)==FALSE )
{
return GX1101_CB_ERROR;
}
}
if ( DVB_CB_Read_Burst (u8Deviceid, pu8Buffer, no_of_bytes)==FALSE )
{
return GX1101_CB_ERROR;
}
return GX1101_NO_ERROR;
}
/*******************************************************************************************
Function : gx1101_Open_Tuner_CB()
Description : Open Secondary Serial 2-Wire Control Bus to access the tuner
Input : none
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Open_Tuner_CB(void)
{
GX1101_STATUS status;
u8 buffer[2];
if ((status = gx1101_Read_Registers(GX1101_GLB_CTRL, buffer, 1, FALSE)) != GX1101_NO_ERROR)
return status;
//buffer[0] = buffer[0] & 0xfe;
if(u8ChipID == GX1101_CHIP_ID)
buffer[0] = buffer[0] |GX1101_GLB_CTRL_CB_OPEN;
else
buffer[0] = 0x00;
status = gx1101_Write_Registers(GX1101_GLB_CTRL, buffer, 1, FALSE);
return status;
}
/*******************************************************************************************
Function : gx1101_Close_Tuner_CB()
Description : Close Secondary Serial 2-Wire Control Bus to access the tuner
Input : none
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Close_Tuner_CB(void)
{
GX1101_STATUS status;
u8 buffer[2];
if ((status = gx1101_Read_Registers(GX1101_GLB_CTRL, buffer, 1, FALSE)) != GX1101_NO_ERROR)
return status;
buffer[0] = buffer[0] & 0xfc;
if(u8ChipID == GX1101_CHIP_ID)
buffer[0] = buffer[0] |GX1101_GLB_CTRL_CB_CLOSE;
else
buffer[0] = 0x00;
status = gx1101_Write_Registers(GX1101_GLB_CTRL, buffer, 1, FALSE);
return status;
}
#ifdef DVB_TUNER_MAX2118
void calcu_divider_byte(unsigned long FREQn)//MHz
{
unsigned long dataa;
unsigned int uiStepSize;
unsigned long long_tmp;
unsigned long sr;
unsigned char div,vcoflag,lpf;
unsigned long VCO;
long_tmp = byte[2];
long_tmp = (long_tmp >> 5) & 0x07;
long_tmp = 2<<long_tmp;
long_tmp = MHZ_XTAL_FREQ*1000000 / long_tmp;
long_tmp /= 1000;
uiStepSize = (unsigned int)long_tmp;
dataa = FREQn * 1000;
dataa /= uiStepSize;
byte[0] = (dataa >> 8) & 0x7F;
byte[1] = dataa & 0xFF;
if(FREQn >= 1125)
{
byte[0] |= 0x80;
div = 2;
}
else
{
byte[0] &= 0x7F;
div = 4;
}
VCO = FREQn*div;
if(VCO<=2432)
vcoflag =0;
else if(VCO<=2710)
vcoflag =1;
else if(VCO<=3024)
vcoflag =2;
else if(VCO<=3340)
vcoflag =3;
else if(VCO<=3726)
vcoflag =4;
else if(VCO<=4142)
vcoflag =5;
else if(VCO<=4492)
vcoflag =6;
else if(VCO<=5022)
vcoflag =7;
byte[2]&=0xf8;
byte[2]|= vcoflag;
/*
* calculate the LPF
*/
if(Baud<3000)
Baud = 3000;
// if(Baud<=5000)
// sr = (((unsigned long)Baud)*135)/200+5000;
// else
sr = (((unsigned long)Baud)*135)/200+8000;
sr = sr*MX2118_M;
sr = sr/MHZ_XTAL_FREQ;
if(sr < 4000)
sr = 4000;
sr = ((sr - 4000)*6897)/1000000L;
lpf = (unsigned char)(sr+1);
if(lpf>0x7f)
lpf =0x7f;
byte[3] = lpf;
}
/*******************************************************************************************/
GX1101_STATUS gx1101_tuner_write_max2118(void)
{
if ( DVB_CB_Write_Burst (MX2118_DEVICE_ID, 0x00, byte, 6)==FALSE )
return GX1101_CB_ERROR;
return GX1101_NO_ERROR;
}
/****************************************************************************/
#endif
/*******************************************************************************************
Function : gx1101_Program_Tuner()
Description : Program tuner through gx1101 repeater
Input : lnb_params
Output : none
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Program_Tuner(GX1101_LNB_PARAMS lnb_params)
{
GX1101_STATUS status;
u8 buffer[2];
u32 freq;
freq = lnb_params.KHz_tuner_freq/1000;
calcu_divider_byte(freq);//MHz
gx1101_Open_Tuner_CB();
gx1101_tuner_write_max2118();
gx1101_Close_Tuner_CB();
#if 0
delay_ms(20);
gx1101_Read_Registers(GX1101_CHIP_STATE, buffer, 1, FALSE);
buffer[1] = buffer[0];
gx1101_Read_Registers(GX1101_INTENSITY, buffer, 1, FALSE);
if((buffer[1]&0x80 == 0x00) || (buffer[0] == 0xff))
{//AGC fail or intensity=0
if(lnb_params.KBd_rate >= 16000)
byte[5] = (byte[5] & 0xe0)||0x08;//0x08
else
byte[5] = (byte[5] & 0xe0)||0x05;//0x05
gx1101_Open_Tuner_CB();
gx1101_tuner_write_max2118();
gx1101_Close_Tuner_CB();
byte[5] = 0x0a;
}
#endif
return GX1101_NO_ERROR;
}
/*******************************************************************************************
Function : gx1101_Get_Channel_Status()
Description : Obtaining channel parameters
Input : KHz_tuner_freq
Output : channel_params
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Get_Channel_Status(u32 KHz_tuner_freq , GX1101_CHANNEL_PARAMS *channel_params)
{
GX1101_STATUS status;
u8 buffer[2];
u16 rate;
u32 krate;
u8 loopCount ;
s32 value1,value2,value3;
//printf("\n>> KHz_tuner_freq = %ld ",KHz_tuner_freq);
if ((status = gx1101_Read_Registers(GX1101_SYM_RATE_L, buffer, 2, FALSE)) != GX1101_NO_ERROR)
return status;
rate = (u16)(buffer[1]*256 + buffer[0]);
krate = (u32)rate;
krate = (krate * 1000)/1024;
channel_params->KBd_rate = krate;
if ((status = gx1101_Read_Registers(GX1101_ERR1_L, buffer, 2, FALSE)) != GX1101_NO_ERROR)
return status;
value1 = buffer[1] *256 + buffer[0];
if (buffer[1]&0x80) value1-=0x10000;
//printf("\n>> buffer[0] = 0x%hx ,buffer[1] = 0x%hx,value1 = %ld",buffer[0],buffer[1],value1);
if ((status = gx1101_Read_Registers(GX1101_ERR2_L, buffer, 2, FALSE)) != GX1101_NO_ERROR)
return status;
value2 = buffer[1] *256 + buffer[0];
if (buffer[1]&0x80) value2-=0x10000;
//printf("\n>> buffer[0] = 0x%hx ,buffer[1] = 0x%hx,value2 = %ld",buffer[0],buffer[1],value2);
value3 = value1*GX1101_SYSCLK_KHZ + value2*(s32)channel_params->KBd_rate;
value3 = value3/65536;
//printf("\n>> value3 = %ld",value3);
//printf("\n>> gx1101_get_channel_status2 value3 = %d ",(int)value3);
//printf("\n>> gx1101_get_channel_status channel_params->KBd_rate = %ld ",channel_params->KBd_rate);
channel_params->KHz_center_freq = (u32)((s32)KHz_tuner_freq + value3);
#if PRINT_TEST
printf("\n>> channel_params->KHz_center_freq = %ld ",(unsigned long)channel_params->KHz_center_freq);
#endif
//printf("\n>>get_channel_status channel_params->KBd_rate=%ld\n",(unsigned long)channel_params->KBd_rate );
//printf("\n>> gx1101_get_channel_status1 channel_params->KHz_center_freq = %ld ",channel_params->KHz_center_freq);
return GX1101_LOCK;
}
/*******************************************************************************************
Function : gx1101_Set_Blind_Enable()
Description : Enable or Disable Blind Scan
Input : On or Off
Return : GX1101_STATUS code
*******************************************************************************************/
GX1101_STATUS gx1101_Set_Blind_Enable(u8 OnOff)
{
GX1101_STATUS status;
u8 buffer[2];
if(u8ChipID == GX1101_CHIP_ID)
buffer[0] = OnOff;
else
buffer[0] = 0x00;
status = gx1101_Write_Registers(GX1101_BLIND_SEL, buffer, 1, FALSE);
return status;
}
Check_TPInfo gx1101_tpItem[]=
{
{3200, 1000},
{3200, 1000},
{3200, 1000},
{3200, 1000}
};
/*判斷當前super search或者盲掃出來的頻點是否和其他頻點重復了,與前面3個頻點比較*/
bool8 check_gx1101_tpItem(u16 u16TPFrequency,u16 u16SymbolRate)
{
unsigned char i=NEEDFIND_NUM;
do
{
if((u16TPFrequency> (gx1101_tpItem[i-1].u16TPFrequency-2))
&&(u16TPFrequency < (gx1101_tpItem[i-1].u16TPFrequency+2))
&&(u16SymbolRate> (gx1101_tpItem[i-1].u16SymbolRate-6))
&&(u16SymbolRate<(gx1101_tpItem[i-1].u16SymbolRate+6)))
{//轉發器參數相同
return TRUE;
}
}
while(i--);
for(i = 0;i<(NEEDFIND_NUM-1);i++)
{
gx1101_tpItem[i].u16TPFrequency = gx1101_tpItem[i+1].u16TPFrequency;
gx1101_tpItem[i].u16SymbolRate = gx1101_tpItem[i+1].u16SymbolRate;
}
gx1101_tpItem[NEEDFIND_NUM-1].u16TPFrequency = u16TPFrequency;
gx1101_tpItem[NEEDFIND_NUM-1].u16SymbolRate =u16SymbolRate;
return FALSE;
}
#if 1
EPTPinf_s result[100]; //singal result and the last results.
bool8 gx1101_super_search(u32 u32KHz_tuner_freq/*950000~2150000*/,u32 u32KBd_rate,
u16 MHz_local_frequency,EPTPinf_s ReChannel)
{
u16 if_frequency;
u8 buffer[2];
SCAN_TP_T Cre;
u16 local_frequency;
GX1101_LNB_PARAMS lnb_params;
gx1101_Set_Blind_Enable(GX1101_SET_BLIND_DISABLE);
local_frequency = MHz_local_frequency;
lnb_params.KHz_tuner_freq = u32KHz_tuner_freq;
lnb_params.KBd_rate = u32KBd_rate;
lnb_params.enPolar = ReChannel.lnb;
Baud = u32KBd_rate;
if(gx1101_Set_Program(&lnb_params) == TRUE)
{//如果TP能鎖定，則保存TP
ReChannel.benzhen = (unsigned int)local_frequency;
ReChannel.baud = (unsigned int)u32KBd_rate;
if_frequency = (u16)((u32KHz_tuner_freq+500)/1000);
ReChannel.Fre = (unsigned int)if_frequency;
#ifdef SUPER_SEARCH
if(check_gx1101_tpItem(ReChannel.Fre,ReChannel.baud) == FALSE)
#endif
{
result[ChannelCount] = ReChannel;//save transponder's parameter
ChannelCount++;
}
}
else
{
//printf("super search failed\n");
}
buffer[0] = 0x72;
gx1101_Write_Registers(0x66, buffer, 1, FALSE);
buffer[0] = 0;
buffer[1] = 0;
if(gx1101_Write_Registers(GX1101_ERR1_L, buffer, 2, FALSE) != GX1101_NO_ERROR )
return FALSE;
if( gx1101_Set_Blind_Enable(GX1101_SET_BLIND_ENABLE) != GX1101_NO_ERROR)
return FALSE;
if(gx1101_Open_FD(TRUE) != GX1101_NO_ERROR)
return FALSE;
Baud = 45000;
return TRUE;
}
void BlindSearch(char speed,u16 Local_Frequency)
{
unsigned char pol;
unsigned int TPlong;
EPTPinf_s ReChannel;
u16 if_frequency;
u16 local_frequency;
u32 KHz_tuner_freq_min;
u32 KHz_tuner_freq_max;
u32 KHz_tuner_freq, khz_new_scan_step;
GX1101_STATUS status;
bool8 scan_complete;
s32 s32Process;
GX1101_CHANNEL_PARAMS channel_params;
GX1101_LNB_PARAMS lnb_params;
u8 buffer[2];
u32 u32Offset;
u8 u8ProgressStart,u8Step;
u8 test_p= 0;
bool8 bNeedFind[NEEDFIND_NUM]={1,1,1,1};
lnb_params.enPolar = POL_VERTICAL;
channel_params.lnb_polar = POL_VERTICAL;
gx1101_Set_Blind_Enable(GX1101_SET_BLIND_ENABLE);
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -