/**************************************************************************
*                                                                         *
*   PROJECT     : ARM port for UCOS-II                                    *
*                                                                         *
*   MODULE      : FRMWRK.h                                                *
*                                                                         *
*   AUTHOR      : Michael Anburaj                                         *
*                 URL  : http://geocities.com/michaelanburaj/             *
*                 EMAIL: michaelanburaj@hotmail.com                       *
*                                                                         *
*   PROCESSOR   : EP7312 (32 bit ARM720T RISC core from CIRRUS Logic)     *
*                                                                         *
*   IDE         : SDT 2.51 & ADS 1.2                                      *
*                                                                         *
*   DESCRIPTION :                                                         *
*   External interface & Module configuration header for FRMWRK           *
*   Infrastructure module.                                                *
*                                                                         *
**************************************************************************/


#ifndef __FRMWRK_H__
#define __FRMWRK_H__


#include "def.h"


#ifdef __cplusplus
extern "C" {
#endif


/* ********************************************************************* */
/* Module configuration */

#define __mDate "10/21/02"             /* Revision date */
#define __mVer  "1.05"                 /* Revision number */

#define __mAuthor "Michael Anburaj, http://geocities.com/michaelanburaj/"
#define __mProcessor "EP7312 (ARM720T from CIRRUS Logic)"

#define __nConsolPort         1        /* Consol UART port number */
#define __nConsolBaud         115200   /* Consol Baud rate */
#define __nConsolFifoEn       True     /* FIFO Enable flag */

#define MMU_enabled                    /* This switch is included with the compiler flags */

#define MCLK (74000000)                /* 74Mhz */

#define SRAM_SIZE 48*1024              /* 48K internal SRAM */

#define SDRAM_SIZE 16*1024*1024        /* 16M SDRAM */

#ifdef MMU_enabled
        /* note: Reflect the changes in init.s */
        #define FLASH_SADDR  0x00000000 /* Flash starting address */
        #define SRAM_SADDR   0x06000000 /* SRAM starting address */
        #define SFR_BADDR    0x08000000 /* SFR base address */
        #define SDRAM_SADDR  0x09000000 /* SDRAM starting address */
        #define ISR_BADDR    0x06000000 /* ISR vector table start address */
        #define ETH_BADDR    0x02000000 /* Ethernet Controller (CS8900) base address */
#else
        /* note: Reflect the changes in init.s */
        #define FLASH_SADDR  0x00000000 /* Flash starting address */
        #define SRAM_SADDR   0x60000000 /* SRAM starting address */
        #define SFR_BADDR    0x80000000 /* SFR base address */
        #define SDRAM_SADDR  0xc0000000 /* SDRAM starting address */
        #define ISR_BADDR    0x60000000 /* ISR vector table start address */
        #define ETH_BADDR    0x20000000 /* Ethernet Controller (CS8900) base address */
#endif

#define ETH_IOBADDR 0x300 /* default value */

#define SRAM_EADDR (SRAM_SADDR+SRAM_SIZE-1) /* SRAM end address */
#define SDRAM_EADDR (SDRAM_SADDR+SDRAM_SIZE-1) /* SRAM end address */


/* ********************************************************************* */
/* Interface macro & data definition */

extern char Image$$ZI$$Limit[];

#define C_abRTMem Image$$ZI$$Limit

#ifdef FRMWRK_VERBOSE_EN
#define VERBOSE(x) { x }
#else
#define VERBOSE(x) { }
#endif


/* ********************************************************************* */
/* Interface function definition */

/*
*********************************************************************************************
*                                       FRMWRK_vRamTest
*
* Description: This routine is used do RAM test.
*
* Arguments  : pbID   - Test identification string.
*              wSAddr - RAM starting address.
*              wEAddr - RAM end address.
*
* Return     : none.
*
* Note(s)    : Do not test the following areas using this routine:
*                       1. Stack
*                       2. Software vector table
*                       3. C Variables (RW & ZI)
*********************************************************************************************
*/
void FRMWRK_vRamTest(U8 *pbID,U32 wSAddr,U32 wEAddr);

/*
*********************************************************************************************
*                                       FRMWRK_vStartTicker
*
* Description: This routine starts Timer1 (TC1) in the Prescale mode for OS Tick.
*
* Arguments  : wTicksPerSec - Time ticks per second.
*
* Return     : none.
*
* Note(s)    : 
*********************************************************************************************
*/
void FRMWRK_vStartTicker(U32 wTicksPerSec); /* wTicksPerSec = 10...10000 ticks per sec */

/*
*********************************************************************************************
*                                       APP_vMain
*
* Description: This is the Application main entry function.
*
* Arguments  : none.
*
* Return     : none.
*
* Note(s)    : This function needs to be implemented in the Application.
*********************************************************************************************
*/
void APP_vMain(void);


/* ********************************************************************* */

#ifdef __cplusplus
}
#endif

#endif /*__FRMWRK_H__*/