Compilation:	Usual thing: rm -f Config.local ; make for vanilla			make refconf for reference clock (e. g. DCF77)Directory contents:	hints/PARSE	- this file	xntpd/refclock_parse.c			- reference clock support for DCF77/GPS in xntp	parse/parse.c			- Reference clock data parser framework	parse/parse_conf.c			- parser configuration (clock types)	parse/clk_meinberg.c			- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)	parse/clk_schmid.c			- Schmid receiver (DCF77)	parse/clk_rawdcf.c			- 100/200ms pulses via 50 Baud line (DCF77)	parse/clk_dcf7000.c			- ELV DCF7000 (DCF77)	parse/clk_trimble.c			- Trimble SV6 GPS receiver			  If you want to add new clock types please check			  with kardel@informatik.uni-erlangen.de. These files			  implement the conversion of RS232 data streams into			  timing information used by refclock_parse.c which is			  mostly generic except for NTP configuration constants.	parse/Makefile.kernel			- *SIMPLE* makefile to build a loadable STREAMS			  module for SunOS 4.x / SunOS 5.x systems	parse/parsestreams.c			- SUN Streams module (loadable) for radio clocks			  This streams module is designed for SunOS 4.1.X.	parse/parsesolaris.c			- SUN Streams module (loadable) for radio clocks.			  This streams module is designed for SunOS 5.x			  Beware this is still new - so it might crash			  your machine (we have seen it working, though).	parse/parsetest.c			- simple test program for STREAMS module. Its so simple,			  that it doesn't even set TTY-modes, thus they got to			  be correct on startup - works for Meinberg receivers	parse/testdcf.c			- test program for raw DCF77 (100/200ms pulses)			  receivers        include/parse.h - interface to "parse" module and more        include/parse_conf.h			- interface to "parse" configuration	include/sys/parsestreams.h			- STREAMS specific definitions	scripts/support			- scripts (perl & sh) for statistics and rc startup			  the startup scripts are used in Erlangen for			  starting the daemon on a variety of Suns and HPs			  and for Reference Clock startup on Suns			  These scripts may or may not be helpful to you.Supported clocks:	Meinberg DCF U/A 31	Meinberg PZF535/TCXO	(Software revision PZFUERL 4.6)	Meinberg PZF535/OCXO	(Software revision PZFUERL 4.6)	Meinberg GPS166		(Software version for Uni-Erlangen)	ELV DCF7000		(not recommended - casual/emergency use only)	Conrad DCF77 receiver	(email: time@informatik.uni-erlangen.de)	  + level converter	TimeBrick		(email: time@informatik.uni-erlangen.de)	Schmid Receiver Kit	Trimble SV6 GPS receiverAddresses:  Meinberg Funkuhren  Auf der Landwehr 22  31812 Bad Pyrmont  Germany  Tel.: 05281/20 18  FAX:  05281/60 81 80  ELV Kundenservice  Postfach 1000  26787 Leer  Germany  Tel.: 0491/60 08 88  Walter Schmidt  Eichwisrain 14  8634 Hombrechtikon  SwitzerlandIf you have problems mail to:	time@informatik.uni-erlangen.deWe'll help (conditions permitting)