------------------------------------------------------------------------
-- A T M E L   A R M   M I C R O C O N T R O L L E R S                --
------------------------------------------------------------------------
-- BSDL file
--
-- File Name:     AT91SAM7S64_TQ64.BSD
-- File Revision: 2.0
-- Date: 	  Thu July 21 2005

-- Created by:    Atmel Corporation
-- File Status:   Released
--
-- Device:        AT91SAM7S64
-- Package:       R_LQ064_A
--
-- Visit http://www.atmel.com for a updated list of BSDL files.
--
------------------------------------------------------------------------
-- Syntax and Semantics are checked against the IEEE 1149.1 standard. --
-- The logical functioning of the standard Boundary-Scan instructions --
-- and of the associated bypass, idcode and boundary-scan register    --
-- described in this BSDL file has been verified against its related  --
-- silicon by JTAG Technologies B.V.                                  --
------------------------------------------------------------------------
------------------------------------------------------------------------
--                       IMPORTANT NOTICE                             --
--                                                                    --
--   Copyright 2005 Atmel Corporation. All Rights Reserved.           --
--                                                                    --
--   Atmel assumes no responsibility or liability arising out         --
--   this application or use of any information described herein      --
--   except as expressly agreed to in writing by Atmel Corporation.   --
--                                                                    --
-- ------------------------------------------------------------------ --
-- This BSDL File has been verified on severals BSDL Syntax           --
-- Checker/Compilers                                                  --
--                                                                    --
--                                                                    --
-- AGILENT 3070 BSDL COMPILER Thu Jul 21 02:38:49 MDT 2005.           --
-- BSDL File /work/AT91SAM7S64.bsdl, package R_LQ064_A compiled       --
--     successfully. 0 ERRORS, 0 WARNINGS, OBJECT PRODUCED            --
--                                                                    --
------------------------------------------------------------------------
 entity AT91SAM7S64 is

-- This section identifies the default device package selected.

   generic (PHYSICAL_PIN_MAP: string:= "R_LQ064_A");

-- This section declares all the ports in the design.

   port (
          erase   : in       bit;
          icetck  : in       bit;
          icetdi  : in       bit;
          icetms  : in       bit;
          jtagsel : in       bit;
          selv32  : in	     bit;
          test    : linkage  bit;
          nrst    : in	     bit;
          pa0     : inout    bit;
          pa1     : inout    bit;
          pa10    : inout    bit;
          pa11    : inout    bit;
          pa12    : inout    bit;
          pa13    : inout    bit;
          pa14    : inout    bit;
          pa15    : inout    bit;
          pa16    : inout    bit;
          pa17    : inout    bit;
          pa18    : inout    bit;
          pa19    : inout    bit;
          pa2     : inout    bit;
          pa20    : inout    bit;
          pa21    : inout    bit;
          pa22    : inout    bit;
          pa23    : inout    bit;
          pa24    : inout    bit;
          pa25    : inout    bit;
          pa26    : inout    bit;
          pa27    : inout    bit;
          pa28    : inout    bit;
          pa29    : inout    bit;
          pa3     : inout    bit;
          pa30    : inout    bit;
          pa31    : inout    bit;
          pa4     : inout    bit;
          pa5     : inout    bit;
          pa6     : inout    bit;
          pa7     : inout    bit;
          pa8     : inout    bit;
          pa9     : inout    bit;
          icetdo  : out      bit
   );

   use STD_1149_1_1994.all;

   attribute COMPONENT_CONFORMANCE of AT91SAM7S64: entity is
"STD_1149_1_1993";

   attribute PIN_MAP of AT91SAM7S64: entity is PHYSICAL_PIN_MAP;

-- This section specifies the pin map for each port. This information
-- is extracted from the port-to-pin map file that was read in using
-- the "read_pin_map" command.

     constant R_LQ064_A: PIN_MAP_STRING :=
        "erase   : 55," &
        "icetck  : 53," &
        "icetdi  : 33," &
        "icetms  : 51," &
        "jtagsel : 50," &
        "selv32  : 56," &
        "test    : 40," &
        "nrst    : 39," &
        "pa0     : 48," &
        "pa1     : 47," &
        "pa10    : 29," &
        "pa11    : 28," &
        "pa12    : 27," &
        "pa13    : 22," &
        "pa14    : 21," &
        "pa15    : 20," &
        "pa16    : 19," &
        "pa17    : 9," &
        "pa18    : 10," &
        "pa19    : 13," &
        "pa2     : 44," &
        "pa20    : 16," &
        "pa21    : 11," &
        "pa22    : 14," &
        "pa23    : 15," &
        "pa24    : 23," &
        "pa25    : 25," &
        "pa26    : 26," &
        "pa27    : 37," &
        "pa28    : 38," &
        "pa29    : 41," &
        "pa3     : 43," &
        "pa30    : 42," &
        "pa31    : 52," &
        "pa4     : 36," &
        "pa5     : 35," &
        "pa6     : 34," &
        "pa7     : 32," &
        "pa8     : 31," &
        "pa9     : 30," &
        "icetdo  : 49";

-- This section specifies the TAP ports.
-- For the TAP TCK port, the parameters in the brackets are:
--        First Field : Maximum  TCK frequency.
--        Second Field: Allowable states TCK may be stopped in.

   attribute TAP_SCAN_CLOCK of icetck: signal is (10.0e6, BOTH);
   attribute TAP_SCAN_IN    of icetdi: signal is true;
   attribute TAP_SCAN_MODE  of icetms: signal is true;
   attribute TAP_SCAN_OUT   of icetdo: signal is true;
   attribute TAP_SCAN_RESET of nrst  : signal is true;

-- Specifies the compliance enable patterns for the design.
-- It lists a set of design ports and the values that they
-- should be set to, in order to enable compliance to IEEE
-- Std 1149.1

   attribute COMPLIANCE_PATTERNS of AT91SAM7S64: entity is
        "(jtagsel, selv32) (10)";