' Title IRSerTst.Bas
' @ L. Johnson  20th September 1999
'
' Send Asyncronous Serial Data over an Infra-Red Link
' At Various Baud Rates and Inverted Mode
' An Infra-Red LED should be Connected to PORTB.0
' If longer range is required and NPN transistor could be employed
' as an amplifier, as in the BASIC STAMP1 Application Notes
'
' Place  Include "Irserout.Bas"
' At the front of the Program to load the new subroutine in
'
' To Use the New Routine, Load the Variable:- 
' IR_ByteOut with the appropriate value (0-255)
' And Call the Subroutine:-
' Gosub IRSerout
'
' Three New Defines have been added:-
' IRSEROUT_PORT.....Selects the Port for sending (ie PORTB)
' IRSEROUT_PIN......Selects the Pin for sending (ie 1)
' IRSEROUT_BAUD.....Selects the Baud Rate (ie 300,600,1200,2400)

' IRSerout works with 4Mhz, 8Mhz, 10Mhz and 12Mhz Xtals

' This routine is for the 16F84, but any 14bit core PIC could be used

	Include "Modedefs.Bas"
	Include "Irserout.Bas"			' Load in the New Subroutine


' ** Set Xtal Value in Mhz **

	Define	OSC		4		' Set Xtal Frequency

' ** New Defines for IRSEROUT **
 
	Define	IRSEROUT_PORT	PortB		' Set IRSEROUT Port
	Define	IRSEROUT_PIN	0		' Set IRSEROUT Pin
	Define	IRSEROUT_BAUD	1200		' Set IRSEROUT Baud Rate

' ** Declare Variables **

	Counter		Var	Byte		' Count from 0 to 255

' ** Start of Program **

Start:	Pause 400				' Wait For the Pic to Initialize
	Counter = 0				' Clear Counter
	
Main:	IR_Byteout = 254			' Send the Control Code			
	Gosub IRSerout				
	IR_Byteout = 1				' Send the Code for Clear LCD			
	Gosub IRSerout
	Pause 30				' Wait for Serial LCD to Recover

	IR_Byteout = "R"			' Load the letter "R" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "E"			' Load the letter "E" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "C"			' Load the letter "C" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "E"			' Load the letter "E" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "I"			' Load the letter "I" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "V"			' Load the letter "V" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "E"			' Load the letter "E" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = "D"			' Load the letter "D" into IR_ByteOut			
	Gosub IRSerout				' Send the Byte
	IR_Byteout = " "			' Load a Space into IR_ByteOut			
	Gosub IRSerout				' Send the Byte

' Send Out In 3 Digit Ascii, The Value Of Counter

	IR_Byteout= Counter Dig 2 
	IR_Byteout=IR_Byteout+48
	Gosub IRSerout				' Send the Byte

	IR_Byteout= Counter Dig 1 
	IR_Byteout=IR_Byteout+48
	Gosub IRSerout				' Send the Byte

	IR_Byteout= Counter Dig 0 
	IR_Byteout=IR_Byteout+48
	Gosub IRSerout				' Send the Byte

	Pause 500				' A Long Delay
	Counter=Counter+1			' Increment Counter
	Goto Main				' Infinite Loop