s2410RTC->rALMSEC  = (unsigned char)TO_BCD(lpst->wSecond );
	s2410RTC->rALMMIN  = (unsigned char)TO_BCD(lpst->wMinute );
	s2410RTC->rALMHOUR = (unsigned char)TO_BCD(lpst->wHour   );

	s2410RTC->rALMDAY  = (unsigned char)TO_BCD(lpst->wDay    );
	s2410RTC->rALMMON  = (unsigned char)TO_BCD(lpst->wMonth  );
	s2410RTC->rALMYEAR = (unsigned char)TO_BCD((lpst->wYear % 100));

	s2410RTC->rRTCALM = 0x7f;
	
	s2410RTC->rRTCCON = (0 << 0);		/* RTC Control Disable 	*/

	s2410INT->rSRCPND  = BIT_RTC;		/* RTC Alarm Interrupt Clear */
	if (s2410INT->rINTPND & BIT_RTC) s2410INT->rINTPND = BIT_RTC;
	s2410INT->rINTMSK &= ~BIT_RTC;		/* RTC Alarm Enable 	*/
			
	return TRUE;
}

#if 0
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
BOOL 
OEMSetAlarmTime(LPSYSTEMTIME lpst) 
{
    volatile RTCreg *s2410RTC = (RTCreg *)RTC_BASE;

	RETAILMSG(1,(TEXT("OEMSetAlarmTime: Year: %u, Month: %u, Day: %u, Hour: %u, Minute: %u, second: %u rcnr=%Xh\n"), 
		lpst->wYear, lpst->wMonth,lpst->wDay, lpst->wHour, lpst->wMinute,lpst->wSecond,s2410RTC->rRTCCON));
    
    s2410RTC->rRTCCON = (1 << 0);					/* RTC Control Enable 			*/
    
    s2410RTC->rALMSEC  = (unsigned char)TO_BCD(lpst->wSecond );
    s2410RTC->rALMMIN  = (unsigned char)TO_BCD(lpst->wMinute );
    s2410RTC->rALMHOUR = (unsigned char)TO_BCD(lpst->wHour   );

    s2410RTC->rALMDAY  = (unsigned char)TO_BCD(lpst->wDay    );
    s2410RTC->rALMMON  = (unsigned char)TO_BCD(lpst->wMonth  );
    s2410RTC->rALMYEAR = (unsigned char)TO_BCD((lpst->wYear % 100));

	s2410RTC->rRTCCON = (0 << 0);					/* RTC Control Disable			*/

	
    return TRUE;
}
#endif

//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
DWORD
PerfCountFreq()
{
    return (OEMClockFreq);
}



//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
DWORD
PerfCountSinceTick()
{
    volatile PWMreg *s2410PWM;
    DWORD dwCount;

    s2410PWM = (PWMreg *)PWM_BASE;

    dwCount= ((DWORD)s2410PWM->rTCNTO4);
    
    // Note: if dwCount is negative, the counter went past the match point.  The math
	// still works since it accounts for the dwReschedIncr time plus the time past
	// the match.
    return dwCurReschedIncr - dwCount;
}


//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void
CPUSetSysTimerCount(
    DWORD dwCountdownMSec
    )
{
	DWORD dwMatch, ttmp;
	volatile PWMreg *s2410PWM;

    s2410PWM = (PWMreg *)PWM_BASE;
	
    dwCurReschedIncr = dwCountdownMSec * OEMCount1ms;
    dwMatch = dwCurReschedIncr;

	s2410PWM->rTCNTB4 = dwMatch;

	ttmp = s2410PWM->rTCON & (~(0xf << 20));

	s2410PWM->rTCON = ttmp | (2 << 20);		/* update TCVNTB4, stop					*/
	s2410PWM->rTCON = ttmp | (1 << 20);		/* one-shot mode,  start				*/
}


//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
BOOL
CPUClearSysTimerIRQ(
    void
    )
{
	volatile INTreg *s2410INT; 
	BOOL fPending;
	DWORD intstatus;
	    
	s2410INT = (INTreg *)INT_BASE;
		
	intstatus = s2410INT->rSRCPND;

	if ((intstatus & (BIT_TIMER4)) != 0) {
		s2410INT->rSRCPND = BIT_TIMER4;        
		s2410INT->rINTPND = BIT_TIMER4;
		fPending = TRUE;
	} else {
		fPending = FALSE;
	}
	
    return fPending;	
}


//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
DWORD
CPUGetSysTimerCountElapsed(
    DWORD dwTimerCountdownMSec,
    volatile DWORD *pCurMSec,
    DWORD *pPartialCurMSec,
    volatile ULARGE_INTEGER *pCurTicks
    )
{
    volatile PWMreg *s2410PWM;
	DWORD dwTick, dwCount;

    s2410PWM = (PWMreg *)PWM_BASE;
    dwTick = dwTimerCountdownMSec * OEMCount1ms;

    // If timer IRQ pending, a full resched period elapsed
    if (CPUClearSysTimerIRQ( )) {
        *pCurMSec += dwTimerCountdownMSec;
        pCurTicks->QuadPart += dwTick;
        return dwTimerCountdownMSec;
    }

    // No timer IRQ pending, calculate how much time has elapsed
	dwCount= ((DWORD)s2410PWM->rTCNTO4);	
	
    if (dwCount > dwTick) {
        // This is an error case.  Recover gracefully.
        dwCount = dwTick;
    } else {
        dwCount = dwTick - dwCount;
    }

    pCurTicks->QuadPart += dwCount;

    dwCount += *pPartialCurMSec;
    *pPartialCurMSec = dwCount % OEMCount1ms;
    *pCurMSec += (dwCount /= OEMCount1ms);

    return dwCount;
}

//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
extern void CPUEnterIdleMode(void);

extern void OEMWriteDebugLED(WORD wIndex, DWORD dwPattern);

void
CPUEnterIdle()
{
	static volatile CLKPWRreg * s2410CLKPW = (CLKPWRreg *)CLKPWR_BASE;
	static volatile IOPreg    * s2410IOP   = (IOPreg    *)IOP_BASE;
	static volatile UART0reg  * s2410UART0 = (UART0reg  *)UART0_BASE;
	static volatile UART2reg  * s2410UART2 = (UART2reg  *)UART2_BASE;
	
	fInterruptFlag = FALSE;
	INTERRUPTS_ON();

	if ( !(s2410UART0->rUFSTAT & 0x3ff) && !(s2410UART2->rUFSTAT & 0x3ff) )		/* Check UART FIFO */
	{
		if (!fSlowInterruptFlag)
		{
			s2410IOP->rGPFDAT &= ~(1 << 5);
//			s2410CLKPW->rCLKCON |=  (1 << 2);		/* Enter IDLE Mode                              */
			MMU_WaitForInterrupt();
		}

		while (!fInterruptFlag) {}					/* Wait until S3C2410X enters IDLE mode         */
		if (!fSlowInterruptFlag)
		{
//			s2410CLKPW->rCLKCON &= ~(1 << 2);		/* turn-off IDLE bit.                           */
													/* Any interrupt will wake up from IDLE mode    */
			s2410IOP->rGPFDAT |= (1 << 5);
		}
	}
	else
	{
		while (!fInterruptFlag) {}					/* Wait until S3C2410X enters IDLE mode         */
	}
}


// Maximum idle is fixed a 1 ms because the PIT has to count down to 0 before reloading
// the new countdown value.
#define IDLE_MAX_MS  10 // 100
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
DWORD
CPUGetSysTimerCountMax(
    DWORD dwIdleMSecRequested
    )
{
    if (dwIdleMSecRequested > IDLE_MAX_MS) {
        return IDLE_MAX_MS;
    }
    return dwIdleMSecRequested;
}

void EnterSlowMode()
{
	static volatile CLKPWRreg * s2410CLKPW  = (CLKPWRreg *)CLKPWR_BASE;
	static volatile IOPreg    * s2410IOP    = (IOPreg    *)IOP_BASE;
	static volatile MEMreg	  * s2410MemReg = (MEMreg      *)MEMCTRL_BASE;

	//RETAILMSG(1,(TEXT("EnterSlowMode \r\n")));
	fSlowInterruptFlag = TRUE;
	s2410IOP->rGPFDAT &= ~(1 << 7);

	//FCLK=FIN/1, SLOW mode, MPLL=off, UPLL=off
	s2410CLKPW->rCLKSLOW |= (1<<4)|(1<<5)|(1<<7);
	saveREFRESH = s2410MemReg->rREFRESH;
	s2410MemReg->rREFRESH=(1<<23)|(unsigned int)(2048+1-12*15.6);
	//Trp=2clk, Trc=4clk
}

void ExitSlowMode()
{
	static volatile CLKPWRreg * s2410CLKPW  = (CLKPWRreg *)CLKPWR_BASE;
	static volatile IOPreg    * s2410IOP    = (IOPreg    *)IOP_BASE;
	static volatile MEMreg	  * s2410MemReg = (MEMreg      *)MEMCTRL_BASE;
//	int i;

	//RETAILMSG(1,(TEXT("ExitSlowMode \r\n")));
	fSlowInterruptFlag = FALSE;

	s2410CLKPW->rCLKSLOW = 0|(1<<4)|(0<<5);// PLL on, MPLL=on
	//for ( i = 0; i < 2048; i++); //S/W MPLL lock-time
	s2410CLKPW->rCLKSLOW = 0|(0<<4)|(0<<5);// NORMAL mode, PLL=on, MPLL=on
	s2410MemReg->rREFRESH = saveREFRESH;

	s2410IOP->rGPFDAT |= (1 << 7);
}


void SetSysTimerInterval(DWORD dwTicks)
{
    volatile PWMreg *s2410PWM = (PWMreg *)PWM_BASE;
    volatile INTreg *s2410INT = (INTreg *)INT_BASE;  
    DWORD dwTimerTemp;  

	// Mask and clear timer interrupt.
	//
    s2410INT->rINTMSK |= BIT_TIMER4;
    s2410INT->rSRCPND  = BIT_TIMER4;
    s2410INT->rINTPND  = BIT_TIMER4;

	// Change number of timer ticks in the period.
	//
	s2410PWM->rTCNTB4 = dwTicks;
	dwTimerTemp = s2410PWM->rTCON & (~(0xf << 20));

	s2410PWM->rTCON = dwTimerTemp | (2 << 20);	// Update TCVNTB4 and stop.
	s2410PWM->rTCON = dwTimerTemp | (1 << 20);	// One-shot mode and start.

	// Unmask the timer interrupt.
	//
    s2410INT->rINTMSK &= ~BIT_TIMER4;		
}