?? s3c2410disp.cpp
字號:
UCHAR *andLine; // output pointer
UCHAR *xorLine; // output pointer
char bAnd;
char bXor;
int row;
int col;
int i;
int bitMask;
RETAILMSG(0, (TEXT("S3C2410DISP::SetPointerShape(0x%X, 0x%X, %d, %d, %d, %d)\r\n"),pMask, pColorSurf, xHot, yHot, cX, cY));
// turn current cursor off
CursorOff();
// release memory associated with old cursor
if (m_CursorBackingStore)
{
delete (void*)m_CursorBackingStore;
m_CursorBackingStore = NULL;
}
if (m_CursorXorShape)
{
delete (void*)m_CursorXorShape;
m_CursorXorShape = NULL;
}
if (m_CursorAndShape)
{
delete (void*)m_CursorAndShape;
m_CursorAndShape = NULL;
}
if (!pMask) // do we have a new cursor shape
{
m_CursorDisabled = TRUE; // no, so tag as disabled
}
else
{
m_CursorDisabled = FALSE; // yes, so tag as not disabled
// allocate memory based on new cursor size
m_CursorBackingStore = new UCHAR[(cX * (m_colorDepth >> 3)) * cY];
m_CursorXorShape = new UCHAR[cX * cY];
m_CursorAndShape = new UCHAR[cX * cY];
// store size and hotspot for new cursor
m_CursorSize.x = cX;
m_CursorSize.y = cY;
m_CursorHotspot.x = xHot;
m_CursorHotspot.y = yHot;
andPtr = (UCHAR*)pMask->Buffer();
xorPtr = (UCHAR*)pMask->Buffer() + (cY * pMask->Stride());
// store OR and AND mask for new cursor
for (row = 0; row < cY; row++)
{
andLine = &m_CursorAndShape[cX * row];
xorLine = &m_CursorXorShape[cX * row];
for (col = 0; col < cX / 8; col++)
{
bAnd = andPtr[row * pMask->Stride() + col];
bXor = xorPtr[row * pMask->Stride() + col];
for (bitMask = 0x0080, i = 0; i < 8; bitMask >>= 1, i++)
{
andLine[(col * 8) + i] = bAnd & bitMask ? 0xFF : 0x00;
xorLine[(col * 8) + i] = bXor & bitMask ? 0xFF : 0x00;
}
}
}
}
return S_OK;
}
SCODE S3C2410DISP::MovePointer(INT xPosition, INT yPosition)
{
RETAILMSG(0, (TEXT("S3C2410DISP::MovePointer(%d, %d)\r\n"), xPosition, yPosition));
CursorOff();
if (xPosition != -1 || yPosition != -1)
{
// compute new cursor rect
m_CursorRect.left = xPosition - m_CursorHotspot.x;
m_CursorRect.right = m_CursorRect.left + m_CursorSize.x;
m_CursorRect.top = yPosition - m_CursorHotspot.y;
m_CursorRect.bottom = m_CursorRect.top + m_CursorSize.y;
CursorOn();
}
return S_OK;
}
void S3C2410DISP::WaitForNotBusy(void)
{
RETAILMSG(0, (TEXT("S3C2410DISP::WaitForNotBusy\r\n")));
return;
}
int S3C2410DISP::IsBusy(void)
{
RETAILMSG(0, (TEXT("S3C2410DISP::IsBusy\r\n")));
return 0;
}
void S3C2410DISP::GetPhysicalVideoMemory(unsigned long *physicalMemoryBase, unsigned long *videoMemorySize)
{
RETAILMSG(0, (TEXT("S3C2410DISP::GetPhysicalVideoMemory\r\n")));
*physicalMemoryBase = gdwLCDVirtualFrameBase;
*videoMemorySize = m_cbScanLineLength * m_nScreenHeight;
}
SCODE S3C2410DISP::AllocSurface(GPESurf **surface, INT width, INT height, EGPEFormat format, INT surfaceFlags)
{
RETAILMSG(0, (TEXT("S3C2410DISP::AllocSurface\r\n")));
if (surfaceFlags & GPE_REQUIRE_VIDEO_MEMORY)
{
return E_OUTOFMEMORY;
}
// Allocate from system memory
*surface = new GPESurf(width, height, format);
if (*surface != NULL)
{
// Check that the bits were allocated succesfully
if (((*surface)->Buffer()) == NULL)
{
delete *surface; // Clean up
}
else
{
return S_OK;
}
}
return E_OUTOFMEMORY;
}
SCODE S3C2410DISP::WrappedEmulatedLine (GPELineParms *lineParameters)
{
SCODE retval;
RECT bounds;
int N_plus_1; // Minor length of bounding rect + 1
// calculate the bounding-rect to determine overlap with cursor
if (lineParameters->dN) // The line has a diagonal component (we'll refresh the bounding rect)
{
N_plus_1 = 2 + ((lineParameters->cPels * lineParameters->dN) / lineParameters->dM);
}
else
{
N_plus_1 = 1;
}
switch(lineParameters->iDir)
{
case 0:
bounds.left = lineParameters->xStart;
bounds.top = lineParameters->yStart;
bounds.right = lineParameters->xStart + lineParameters->cPels + 1;
bounds.bottom = bounds.top + N_plus_1;
break;
case 1:
bounds.left = lineParameters->xStart;
bounds.top = lineParameters->yStart;
bounds.bottom = lineParameters->yStart + lineParameters->cPels + 1;
bounds.right = bounds.left + N_plus_1;
break;
case 2:
bounds.right = lineParameters->xStart + 1;
bounds.top = lineParameters->yStart;
bounds.bottom = lineParameters->yStart + lineParameters->cPels + 1;
bounds.left = bounds.right - N_plus_1;
break;
case 3:
bounds.right = lineParameters->xStart + 1;
bounds.top = lineParameters->yStart;
bounds.left = lineParameters->xStart - lineParameters->cPels;
bounds.bottom = bounds.top + N_plus_1;
break;
case 4:
bounds.right = lineParameters->xStart + 1;
bounds.bottom = lineParameters->yStart + 1;
bounds.left = lineParameters->xStart - lineParameters->cPels;
bounds.top = bounds.bottom - N_plus_1;
break;
case 5:
bounds.right = lineParameters->xStart + 1;
bounds.bottom = lineParameters->yStart + 1;
bounds.top = lineParameters->yStart - lineParameters->cPels;
bounds.left = bounds.right - N_plus_1;
break;
case 6:
bounds.left = lineParameters->xStart;
bounds.bottom = lineParameters->yStart + 1;
bounds.top = lineParameters->yStart - lineParameters->cPels;
bounds.right = bounds.left + N_plus_1;
break;
case 7:
bounds.left = lineParameters->xStart;
bounds.bottom = lineParameters->yStart + 1;
bounds.right = lineParameters->xStart + lineParameters->cPels + 1;
bounds.top = bounds.bottom - N_plus_1;
break;
default:
RETAILMSG(0, (TEXT("Invalid direction: %d\r\n"), lineParameters->iDir));
return E_INVALIDARG;
}
// check for line overlap with cursor and turn off cursor if overlaps
if (m_CursorVisible && !m_CursorDisabled &&
m_CursorRect.top < bounds.bottom && m_CursorRect.bottom > bounds.top &&
m_CursorRect.left < bounds.right && m_CursorRect.right > bounds.left)
{
CursorOff();
m_CursorForcedOff = TRUE;
}
// do emulated line
retval = EmulatedLine (lineParameters);
// se if cursor was forced off because of overlap with line bouneds and turn back on
if (m_CursorForcedOff)
{
m_CursorForcedOff = FALSE;
CursorOn();
}
return retval;
}
SCODE S3C2410DISP::Line(GPELineParms *lineParameters, EGPEPhase phase)
{
RETAILMSG(0, (TEXT("S3C2410DISP::Line\r\n")));
if (phase == gpeSingle || phase == gpePrepare)
{
if ((lineParameters->pDst != m_pPrimarySurface))
{
lineParameters->pLine = EmulatedLine;
}
else
{
lineParameters->pLine = (SCODE (GPE::*)(struct GPELineParms *)) WrappedEmulatedLine;
}
}
return S_OK;
}
SCODE S3C2410DISP::BltPrepare(GPEBltParms *blitParameters)
{
RECTL rectl;
RETAILMSG(0, (TEXT("S3C2410DISP::BltPrepare\r\n")));
// default to base EmulatedBlt routine
blitParameters->pBlt = EmulatedBlt;
// see if we need to deal with cursor
if (m_CursorVisible && !m_CursorDisabled)
{
// check for destination overlap with cursor and turn off cursor if overlaps
if (blitParameters->pDst == m_pPrimarySurface) // only care if dest is main display surface
{
if (blitParameters->prclDst != NULL) // make sure there is a valid prclDst
{
rectl = *blitParameters->prclDst; // if so, use it
}
else
{
rectl = m_CursorRect; // if not, use the Cursor rect - this forces the cursor to be turned off in this case
}
if (m_CursorRect.top < rectl.bottom && m_CursorRect.bottom > rectl.top &&
m_CursorRect.left < rectl.right && m_CursorRect.right > rectl.left)
{
CursorOff();
m_CursorForcedOff = TRUE;
}
}
// check for source overlap with cursor and turn off cursor if overlaps
if (blitParameters->pSrc == m_pPrimarySurface) // only care if source is main display surface
{
if (blitParameters->prclSrc != NULL) // make sure there is a valid prclSrc
{
rectl = *blitParameters->prclSrc; // if so, use it
}
else
{
rectl = m_CursorRect; // if not, use the CUrsor rect - this forces the cursor to be turned off in this case
}
if (m_CursorRect.top < rectl.bottom && m_CursorRect.bottom > rectl.top &&
m_CursorRect.left < rectl.right && m_CursorRect.right > rectl.left)
{
CursorOff();
m_CursorForcedOff = TRUE;
}
}
}
#ifdef ROTATE
if (m_iRotate && (blitParameters->pDst == m_pPrimarySurface || blitParameters->pSrc == m_pPrimarySurface))
{
blitParameters->pBlt = (SCODE (GPE::*)(GPEBltParms *))EmulatedBltRotate;
}
#endif //ROTATE
#ifdef CLEARTYPE
if (((blitParameters->rop4 & 0xffff) == 0xaaf0 ) && (blitParameters->pMask->Format() == gpe8Bpp))
{
switch (m_colorDepth)
{
case 16:
blitParameters->pBlt = (SCODE (GPE::*)(struct GPEBltParms *)) ClearTypeBlt::ClearTypeBltDst16;
return S_OK;
case 24:
blitParameters->pBlt = (SCODE (GPE::*)(struct GPEBltParms *)) ClearTypeBlt::ClearTypeBltDst24;
return S_OK;
case 32:
blitParameters->pBlt = (SCODE (GPE::*)(struct GPEBltParms *)) ClearTypeBlt::ClearTypeBltDst32;
return S_OK;
default:
break;
}
}
#endif //CLEARTYPE
// see if there are any optimized software blits available
EmulatedBltSelect02(blitParameters);
EmulatedBltSelect08(blitParameters);
EmulatedBltSelect16(blitParameters);
return S_OK;
}
SCODE S3C2410DISP::BltComplete(GPEBltParms *blitParameters)
{
RETAILMSG(0, (TEXT("S3C2410DISP::BltComplete\r\n")));
// see if cursor was forced off because of overlap with source or destination and turn back on
if (m_CursorForcedOff)
{
m_CursorForcedOff = FALSE;
CursorOn();
}
return S_OK;
}
INT S3C2410DISP::InVBlank(void)
{
RETAILMSG(0, (TEXT("S3C2410DISP::InVBlank\r\n")));
return 0;
}
SCODE S3C2410DISP::SetPalette(const PALETTEENTRY *source, USHORT firstEntry, USHORT numEntries)
{
RETAILMSG(0, (TEXT("S3C2410DISP::SetPalette\r\n")));
if (firstEntry < 0 || firstEntry + numEntries > 256 || source == NULL)
{
return E_INVALIDARG;
}
return S_OK;
}
ULONG S3C2410DISP::GetGraphicsCaps()
{
#ifdef CLEARTYPE
return GCAPS_GRAY16 | GCAPS_CLEARTYPE;
#else
return GCAPS_GRAY16;
#endif
}
void RegisterDDHALAPI(void)
{
return; // no DDHAL support
}
#if defined(CLEARTYPE) || defined(ROTATE)
//extern GetGammaValue(ULONG * pGamma);
//extern SetGammaValue(ULONG ulGamma, BOOL bUpdateReg);
ULONG S3C2410DISP::DrvEscape(
SURFOBJ *pso,
ULONG iEsc,
ULONG cjIn,
PVOID pvIn,
ULONG cjOut,
PVOID pvOut)
{
/*
if (iEsc == DRVESC_GETGAMMAVALUE)
{
return GetGammaValue((ULONG *)pvOut);
}
else if (iEsc == DRVESC_SETGAMMAVALUE)
{
return SetGammaValue(cjIn, *(BOOL *)pvIn);
}
*/
#ifdef ROTATE
if (iEsc == DRVESC_GETSCREENROTATION)
{
*(int *)pvOut = ((DMDO_0 | DMDO_90 | DMDO_180 | DMDO_270) << 8) | ((BYTE)m_iRotate);
return DISP_CHANGE_SUCCESSFUL;
}
else if (iEsc == DRVESC_SETSCREENROTATION)
{
if ((cjIn == DMDO_0) ||
(cjIn == DMDO_90) ||
(cjIn == DMDO_180) ||
(cjIn == DMDO_270) )
{
return DynRotate(cjIn);
}
return DISP_CHANGE_BADMODE;
}
#endif //ROTATE & ROTATE
return 0;
}
#endif //CLEARTYPE
ULONG *APIENTRY DrvGetMasks(DHPDEV dhpdev)
{
return gBitMasks;
}
#ifdef ROTATE
void S3C2410DISP::SetRotateParms()
{
int iswap;
switch(m_iRotate)
{
case DMDO_0:
m_nScreenHeightSave = m_nScreenHeight;
m_nScreenWidthSave = m_nScreenWidth;
break;
case DMDO_180:
m_nScreenHeightSave = m_nScreenHeight;
m_nScreenWidthSave = m_nScreenWidth;
break;
case DMDO_90:
case DMDO_270:
iswap = m_nScreenHeight;
m_nScreenHeight = m_nScreenWidth;
m_nScreenWidth = iswap;
m_nScreenHeightSave = m_nScreenWidth;
m_nScreenWidthSave = m_nScreenHeight;
break;
default:
m_nScreenHeightSave = m_nScreenHeight;
m_nScreenWidthSave = m_nScreenWidth;
break;
}
return;
}
LONG S3C2410DISP::DynRotate(int angle)
{
GPESurfRotate *pSurf = (GPESurfRotate *)m_pPrimarySurface;
if (angle == m_iRotate)
return DISP_CHANGE_SUCCESSFUL;
m_iRotate = angle;
switch(m_iRotate)
{
case DMDO_0:
case DMDO_180:
m_nScreenHeight = m_nScreenHeightSave;
m_nScreenWidth = m_nScreenWidthSave;
break;
case DMDO_90:
case DMDO_270:
m_nScreenHeight = m_nScreenWidthSave;
m_nScreenWidth = m_nScreenHeightSave;
break;
}
m_pMode->width = m_nScreenWidth;
m_pMode->height = m_nScreenHeight;
pSurf->SetRotation(m_nScreenWidth, m_nScreenHeight, angle);
return DISP_CHANGE_SUCCESSFUL;
}
#endif //ROTATE
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -