/****************************************************************
 NAME: usbout.c
 DESC: USB bulk-OUT operation related functions
 HISTORY:
 Mar.25.2002:purnnamu: ported for S3C2410X.
 Mar.27.2002:purnnamu: DMA is enabled.
 ****************************************************************/
#include "option.h"
#include "2410addr.h"
#include "2410lib.h"
#include "def.h"

#include "2410usb.h"
#include "usb.h"
#include "usblib.h"
#include "usbsetup.h"
#include "usbout.h"
#include "usbin.h"

extern volatile U32 downloadAddress;
extern volatile U8 *downPt;
extern volatile U32 downloadFileSize;
extern volatile U32 totalDmaCount;
extern volatile U16 checkSum;

static void RdPktEp3_CheckSum(U8 *buf,int num);

// ===================================================================
// All following commands will operate in case 
// - out_csr3 is valid.
// ===================================================================

#define CLR_EP3_OUT_PKT_READY() rOUT_CSR1_REG= ( out_csr3 &(~ EPO_WR_BITS)\
					&(~EPO_OUT_PKT_READY) ) 
#define SET_EP3_SEND_STALL()	rOUT_CSR1_REG= ( out_csr3 & (~EPO_WR_BITS)\
					| EPO_SEND_STALL) )
#define CLR_EP3_SENT_STALL()	rOUT_CSR1_REG= ( out_csr3 & (~EPO_WR_BITS)\
					&(~EPO_SENT_STALL) )
#define FLUSH_EP3_FIFO() 	rOUT_CSR1_REG= ( out_csr3 & (~EPO_WR_BITS)\
					|EPO_FIFO_FLUSH) )

// ***************************
// *** VERY IMPORTANT NOTE ***
// ***************************
// Prepare for the packit size constraint!!!

// EP3 = OUT end point. 

extern U32 UsbFunction;
extern U32 UsbState;
extern U32 UsbInLength;
extern U8 *UsbTxAddr;

U8 ep3Buf[EP3_PKT_SIZE];

void Ep3Handler(void)
{
    U8 out_csr3;
    int fifoCnt; 

/*	static int led = 0xf;
	led ^= 1;
	Led_Display(led);
*/	    
    rINDEX_REG=3;
    out_csr3=rOUT_CSR1_REG;
    
//	DbgOut("<3:%x]",out_csr3);		

    if(out_csr3 & EPO_OUT_PKT_READY)
    {   
		fifoCnt=rOUT_FIFO_CNT1_REG;
		
		if(UsbFunction)
		{				
			RdPktEp3(ep3Buf, fifoCnt);						
			CLR_EP3_OUT_PKT_READY();
			if(*(U32 *)ep3Buf==0x01234567)
			{
				UsbState    = 0x01234567;
				UsbTxAddr   = (U8 *)0x31000000;
				UsbInLength = *(U32 *)(ep3Buf+4);
				PrepareEp1Fifo();
				putch('@');
			}									
			return;
		}

		if(downloadFileSize==0)
		{
			RdPktEp3((U8 *)downPt, 8);
			
			downloadAddress= *(U32 *)downPt;
			downloadFileSize= *(U32 *)(downPt+4);
//			checkSum=0;
			downPt=(U8 *)downloadAddress;
			
			RdPktEp3_CheckSum((U8 *)downPt, fifoCnt-8); //The first 8-bytes are deleted.	    
  	    	downPt+=fifoCnt-8;  
  	    
	  	#if USBDMA
    	 	    //CLR_EP3_OUT_PKT_READY() is not executed. 
				//So, USBD may generate NAK until DMA2 is configured for USB_EP3;
     	    DisableIrq(BIT_USBD);	
      	    return;	
	  	#endif	
		}
		else
		{
		#if USBDMA    	
			DbgOut("<ERROR>");
		#endif    
		    RdPktEp3_CheckSum((U8 *)downPt,fifoCnt);
	    	downPt+=fifoCnt;  //fifoCnt=64
		}
	   	CLR_EP3_OUT_PKT_READY();
		return;
    }
   
    //I think that EPO_SENT_STALL will not be set to 1.
    if(out_csr3 & EPO_SENT_STALL)
    {   
		DbgOut("[STALL]");
	   	CLR_EP3_SENT_STALL();
   		return;
    }	
}

void RdPktEp3_CheckSum(U8 *buf,int num)
{
    int i;
    	
    for(i=0;i<num;i++)
    {
        buf[i]=(U8)rEP3_FIFO;
        checkSum+=buf[i];
    }
}


void __irq IsrDma2(void)
{
    U8 out_csr3;    
    U8 saveIndexReg=rINDEX_REG;    		
    		

    rINDEX_REG=3;
    out_csr3=rOUT_CSR1_REG;
    
    ClearPending(BIT_DMA2);	    
    
    totalDmaCount+=0x80000;

    if(totalDmaCount>=downloadFileSize)// is last?
    {
    	totalDmaCount=downloadFileSize;
			
    	ConfigEp3IntMode();
			
    	if(out_csr3& EPO_OUT_PKT_READY)
    	{
   	    	CLR_EP3_OUT_PKT_READY();
		}
        DisableIrq(BIT_DMA2);//
//        	putch('*');
        EnableIrq(BIT_USBD);//rINTMSK&=~(BIT_USBD);
//			putch('*');        	        
//        DbgOut("@");
    }
    else
    {
	    ReConfigEp3Dma(downloadAddress+totalDmaCount-8, ((downloadFileSize-totalDmaCount)>0x80000)?0x80000:(downloadFileSize-totalDmaCount));
    	while(rEP3_DMA_TTC<0xfffff)
   	    {
   	        rEP3_DMA_TTC_L=0xff;
   	        rEP3_DMA_TTC_M=0xff;
   	        rEP3_DMA_TTC_H=0xf;	    //0xfffff;
   	    }
    	
    }
    rINDEX_REG=saveIndexReg;
}


void ClearEp3OutPktReady(void)
{
    U8 out_csr3;
    rINDEX_REG=3;
    out_csr3=rOUT_CSR1_REG;
    CLR_EP3_OUT_PKT_READY();
}