addr = addr << 9; //addr = addr * 512
	
   CMD[1] = ((addr & 0xFF000000) >>24 );
   CMD[2] = ((addr & 0x00FF0000) >>16 );
   CMD[3] = ((addr & 0x0000FF00) >>8 );

   //Send Command CMD24 to MMC/SD-Card (Write 1 Block/512 Bytes)
   retry=0;
   do
   {  //Retry 100 times to send command.
      tmp=Write_Command_MMC(CMD);
      retry++;
      if(retry==100) 
      { 
        return(tmp); //send commamd Error!
      }
   }
   while(tmp!=0); 
   
   //Before writing,send 100 clock to MMC/SD-Card
   for (i=0;i<100;i++)
   {
      Read_Byte_MMC();
   }
	
   //Send Start Byte to MMC/SD-Card
   Write_Byte_MMC(0xFE);	
	
   //Now send real data Bolck (512Bytes) to MMC/SD-Card
   for (i=0;i<512;i++)
   {
      Write_Byte_MMC(*Buffer++); //send 512 bytes to Card
   }

   //CRC-Byte 
   Write_Byte_MMC(0xFF); //Dummy CRC
   Write_Byte_MMC(0xFF); //CRC Code
   
    
   tmp=Read_Byte_MMC();   // read response
   if((tmp & 0x1F)!=0x05) // data block accepted ?
   {
     MMC_Disable();
     return(WRITE_BLOCK_ERROR); //Error!
   }
   //Wait till MMC/SD-Card is not busy
   while (Read_Byte_MMC()!=0xff){};
	
   //set MMC_Chip_Select to high (MMC/SD-Card Invalid)
   MMC_Disable();
   return(0);
} 

//****************************************************************************
//Routine for reading data Registers of MMC/SD-Card
//Return 0 if no Error.
unsigned char MMC_Read_Block(unsigned char *CMD,unsigned char *Buffer,unsigned int Bytes)
//****************************************************************************
{  
   unsigned int i; unsigned retry,temp;
    
   //Send Command CMD to MMC/SD-Card
   retry=0;
   do
   {  //Retry 100 times to send command.
      temp=Write_Command_MMC(CMD);
      retry++;
      if(retry==100) 
      {
        return(READ_BLOCK_ERROR); //block write Error!
      }
   }
   while(temp!=0); 
   			
   //Read Start Byte form MMC/SD-Card (FEh/Start Byte)
   while (Read_Byte_MMC() != 0xfe){};
	
   //Write blocks(normal 512Bytes) to MMC/SD-Card
   for (i=0;i<Bytes;i++)
   {
      *Buffer++ = Read_Byte_MMC();
   }
   
   //CRC-Byte
   Read_Byte_MMC();//CRC - Byte 
   Read_Byte_MMC();//CRC - Byte
	
   //set MMC_Chip_Select to high (MMC/SD-Card invalid)
   MMC_Disable();
   return(0);
}

/*
//****************************************************************************
//Routine for reading Blocks(512Byte) from MMC/SD-Card
//Return 0 if no Error.
unsigned char MMC_read_sector(unsigned long addr,unsigned char *Buffer)
//****************************************************************************
{	
   //Command 16 is reading Blocks from MMC/SD-Card
   unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; 
   unsigned char temp;
   
   #asm("cli"); //clear all interrupt.
   //Address conversation(logic block address-->byte address)  
   addr = addr << 9; //addr = addr * 512

   CMD[1] = ((addr & 0xFF000000) >>24 );
   CMD[2] = ((addr & 0x00FF0000) >>16 );
   CMD[3] = ((addr & 0x0000FF00) >>8 );

   temp=MMC_Read_Block(CMD,Buffer,512);
   
   return(temp);
} */

//***************************************************************************
//Routine for reading CID Registers from MMC/SD-Card (16Bytes) 
//Return 0 if no Error.
unsigned char Read_CID_MMC(unsigned char *Buffer)
//***************************************************************************
{
   //Command for reading CID Registers
   unsigned char CMD[] = {0x4A,0x00,0x00,0x00,0x00,0xFF}; 
   unsigned char temp;
   temp=MMC_Read_Block(CMD,Buffer,16); //read 16 bytes

   return(temp);
}

//***************************************************************************
//Routine for reading CSD Registers from MMC/SD-Card (16Bytes)
//Return 0 if no Error.
unsigned char Read_CSD_MMC(unsigned char *Buffer)
//***************************************************************************
{	
   //Command for reading CSD Registers
   unsigned char CMD[] = {0x49,0x00,0x00,0x00,0x00,0xFF};
   unsigned char temp;
   temp=MMC_Read_Block(CMD,Buffer,16); //read 16 bytes

   return(temp);
}

//***************************************************************************
//Return: [0]-success or something error!
unsigned char MMC_Start_Read_Sector(unsigned long sector)
//***************************************************************************
{  
   unsigned char retry;
   //Command 16 is reading Blocks from MMC/SD-Card
   unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; 
   unsigned char temp;
   
   #asm("cli"); //clear all interrupt.
   //Address conversation(logic block address-->byte address)  
   sector = sector << 9; //sector = sector * 512

   CMD[1] = ((sector & 0xFF000000) >>24 );
   CMD[2] = ((sector & 0x00FF0000) >>16 );
   CMD[3] = ((sector & 0x0000FF00) >>8 );
   //Send Command CMD to MMC/SD-Card
   retry=0;
   do
   {  //Retry 100 times to send command.
      temp=Write_Command_MMC(CMD);
      retry++;
      if(retry==100) 
      {
        return(READ_BLOCK_ERROR); //block write Error!
      }
   }
   while(temp!=0); 
   			
   //Read Start Byte form MMC/SD-Card (FEh/Start Byte)
   //Now data is ready,you can read it out.
   while (Read_Byte_MMC() != 0xfe){};
   return 0; //Open a sector successfully!
}

//***************************************************************************
void MMC_get_data(unsigned int Bytes,unsigned char *buffer) 
//***************************************************************************
{
   unsigned int j;
   
   #asm("cli"); //clear all interrupt.
   for (j=0;((j<Bytes) && (readPos<512));j++)
   {	
      *buffer++ = Read_Byte_MMC();
      readPos++; //read a byte,increase read position
   }
   if (readPos==512)  
   {  //CRC-Bytes
      Read_Byte_MMC();//CRC - Byte 
      Read_Byte_MMC();//CRC - Byte
      readPos=0;      //reset sector read offset 
      sectorPos++;    //Need to read next sector
      LBA_Opened=0;   //Set to 1 when a sector is opened.
      //set MMC_Chip_Select to high (MMC/SD-Card invalid)
      MMC_Disable();  //MMC disable
   }
}

//***************************************************************************
void MMC_get_data_LBA(unsigned long lba, unsigned int Bytes,unsigned char *buffer)
//***************************************************************************
{ //get data from lba address of MMC/SD-Card
  //If a new sector has to be read then move head
  if (readPos==0) MMC_Start_Read_Sector(lba); 
  MMC_get_data(Bytes,buffer);
}

//***************************************************************************
void MMC_GotoSectorOffset(unsigned long LBA,unsigned int offset)
//***************************************************************************
{  
   //Find the offset in the sector
   unsigned char temp[1];
   MMC_LBA_Close(); //close MMC when read a new sector(readPos=0)
   while (readPos<offset) MMC_get_data_LBA(LBA,1,temp); //go to offset  
}

//***************************************************************************
void MMC_LBA_Close()
//***************************************************************************
{  
   unsigned char temp[1];
   while((readPos!=0x00)|(LBA_Opened==1))
   { //read MMC till readPos==0x00
     MMC_get_data(1, temp); //dummy read,temp is a valid data.
   }  
}

//---------------------------------------------------------------------------- 
#endif //USE_MMC