?? usbhw.c

?? 基于LPC2000 ARM7的設備驅動程序,已在KEIL下調試通過
?? C
?? 第 1 頁 / 共 2 頁
字號:
上一頁 12
 *    Return Value:    None
 */

void USB_ResetEP (DWORD EPNum) {
  WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(0));
}


/*
 *  Set Stall for USB Endpoint
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    None
 */

void USB_SetStallEP (DWORD EPNum) {
  WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(EP_STAT_ST));
}


/*
 *  Clear Stall for USB Endpoint
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    None
 */

void USB_ClrStallEP (DWORD EPNum) {
  WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(0));
}


/*
 *  Read USB Endpoint Data
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *                     pData: Pointer to Data Buffer
 *    Return Value:    Number of bytes read
 */

DWORD USB_ReadEP (DWORD EPNum, BYTE *pData) {
  DWORD cnt, n;

  USB_CTRL = ((EPNum & 0x0F) << 2) | CTRL_RD_EN;

  do {
    cnt = RX_PLENGTH;
  } while ((cnt & PKT_RDY) == 0);
  cnt &= PKT_LNGTH_MASK;

  for (n = 0; n < (cnt + 3) / 4; n++) {
    *((__packed DWORD *)pData) = RX_DATA;
    pData += 4;
  }

  USB_CTRL = 0;

  if (((EP_MSK_ISO >> EPNum) & 1) == 0) {   /* Non-Isochronous Endpoint */
    WrCmd(CMD_SEL_EP(EPAdr(EPNum)));
    WrCmd(CMD_CLR_BUF);
  }

  return (cnt);
}


/*
 *  Write USB Endpoint Data
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *                     pData: Pointer to Data Buffer
 *                     cnt:   Number of bytes to write
 *    Return Value:    Number of bytes written
 */

DWORD USB_WriteEP (DWORD EPNum, BYTE *pData, DWORD cnt) {
  DWORD n;

  USB_CTRL = ((EPNum & 0x0F) << 2) | CTRL_WR_EN;

  TX_PLENGTH = cnt;

  for (n = 0; n < (cnt + 3) / 4; n++) {
    TX_DATA = *((__packed DWORD *)pData);
    pData += 4;
  }

  USB_CTRL = 0;

  WrCmd(CMD_SEL_EP(EPAdr(EPNum)));
  WrCmd(CMD_VALID_BUF);

  return (cnt);
}


#if USB_DMA

/* DMA Descriptor Memory Layout */
const DWORD DDAdr[2] = { DD_NISO_ADR, DD_ISO_ADR };
const DWORD DDSz [2] = { 16,          20         };

/*
 *  Setup USB DMA Transfer for selected Endpoint
 *    Parameters:      EPNum: Endpoint Number
 *                     pDD: Pointer to DMA Descriptor
 *    Return Value:    TRUE - Success, FALSE - Error
 */

BOOL USB_DMA_Setup(DWORD EPNum, USB_DMA_DESCRIPTOR *pDD) {
  DWORD num, ptr, nxt, iso, n;

  iso = pDD->Cfg.Type.IsoEP;                /* Iso or Non-Iso Descriptor */
  num = EPAdr(EPNum);                       /* Endpoint's Physical Address */

  ptr = 0;                                  /* Current Descriptor */
  nxt = udca[num];                          /* Initial Descriptor */
  while (nxt) {                             /* Go through Descriptor List */
    ptr = nxt;                              /* Current Descriptor */
    if (!pDD->Cfg.Type.Link) {              /* Check for Linked Descriptors */
      n = (ptr - DDAdr[iso]) / DDSz[iso];   /* Descriptor Index */
      DDMemMap[iso] &= ~(1 << n);           /* Unmark Memory Usage */
    }
    nxt = *((DWORD *)ptr);                  /* Next Descriptor */
  }

  for (n = 0; n < 32; n++) {                /* Search for available Memory */
    if ((DDMemMap[iso] & (1 << n)) == 0) {
      break;                                /* Memory found */
    }
  }
  if (n == 32) return (FALSE);              /* Memory not available */

  DDMemMap[iso] |= 1 << n;                  /* Mark Memory Usage */
  nxt = DDAdr[iso] + n * DDSz[iso];         /* Next Descriptor */

  if (ptr && pDD->Cfg.Type.Link) {
    *((DWORD *)(ptr + 0))  = nxt;           /* Link in new Descriptor */
    *((DWORD *)(ptr + 4)) |= 0x00000004;    /* Next DD is Valid */
  } else {
    udca[num] = nxt;                        /* Save new Descriptor */
    UDCA[num] = nxt;                        /* Update UDCA in USB */
  }

  /* Fill in DMA Descriptor */
  *(((DWORD *)nxt)++) =  0;                 /* Next DD Pointer */
  *(((DWORD *)nxt)++) =  pDD->Cfg.Type.ATLE |
                       (pDD->Cfg.Type.IsoEP << 4) |
                       (pDD->MaxSize <<  5) |
                       (pDD->BufLen  << 16);
  *(((DWORD *)nxt)++) =  pDD->BufAdr;
  *(((DWORD *)nxt)++) =  pDD->Cfg.Type.LenPos << 8;
  if (iso) {
    *((DWORD *)nxt) =  pDD->InfoAdr;
  }

  return (TRUE); /* Success */
}


/*
 *  Enable USB DMA Endpoint
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    None
 */

void USB_DMA_Enable (DWORD EPNum) {
  EP_DMA_EN = 1 << EPAdr(EPNum);
}


/*
 *  Disable USB DMA Endpoint
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    None
 */

void USB_DMA_Disable (DWORD EPNum) {
  EP_DMA_DIS = 1 << EPAdr(EPNum);
}


/*
 *  Get USB DMA Endpoint Status
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    DMA Status
 */

DWORD USB_DMA_Status (DWORD EPNum) {
  DWORD ptr, val;

  ptr = UDCA[EPAdr(EPNum)];                 /* Current Descriptor */
  if (ptr == 0) return (USB_DMA_INVALID);

  val = *((DWORD *)(ptr + 3*4));            /* Status Information */
  switch ((val >> 1) & 0x0F) {
    case 0x00:                              /* Not serviced */
      return (USB_DMA_IDLE);
    case 0x01:                              /* Being serviced */
      return (USB_DMA_BUSY);
    case 0x02:                              /* Normal Completition */
      return (USB_DMA_DONE);
    case 0x03:                              /* Data Under Run */
      return (USB_DMA_UNDER_RUN);
    case 0x08:                              /* Data Over Run */
      return (USB_DMA_OVER_RUN);
    case 0x09:                              /* System Error */
      return (USB_DMA_ERROR);
  }

  return (USB_DMA_UNKNOWN);
}


/*
 *  Get USB DMA Endpoint Current Buffer Address
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    DMA Address (or -1 when DMA is Invalid)
 */

DWORD USB_DMA_BufAdr (DWORD EPNum) {
  DWORD ptr, val;

  ptr = UDCA[EPAdr(EPNum)];                 /* Current Descriptor */
  if (ptr == 0) return (-1);                /* DMA Invalid */

  val = *((DWORD *)(ptr + 2*4));            /* Buffer Address */

  return (val);                             /* Current Address */
}


/*
 *  Get USB DMA Endpoint Current Buffer Count
 *   Number of transfered Bytes or Iso Packets
 *    Parameters:      EPNum: Endpoint Number
 *                       EPNum.0..3: Address
 *                       EPNum.7:    Dir
 *    Return Value:    DMA Count (or -1 when DMA is Invalid)
 */

DWORD USB_DMA_BufCnt (DWORD EPNum) {
  DWORD ptr, val;

  ptr = UDCA[EPAdr(EPNum)];                 /* Current Descriptor */
  if (ptr == 0) return (-1);                /* DMA Invalid */

  val = *((DWORD *)(ptr + 3*4));            /* Status Information */

  return (val >> 16);                       /* Current Count */
}


#endif /* USB_DMA */


/*
 *  Get USB Last Frame Number
 *    Parameters:      None
 *    Return Value:    Frame Number
 */

DWORD USB_GetFrame (void) {
  DWORD val;

  WrCmd(CMD_RD_FRAME);
  val = RdCmdDat(DAT_RD_FRAME);
  val = val | (RdCmdDat(DAT_RD_FRAME) << 8);

  return (val);
}


/*
 *  USB Interrupt Service Routine
 */

void USB_ISR (void) __irq
{
  DWORD disr, val, n, m;

  disr = DEV_INT_STAT;                      /* Device Interrupt Status */
  DEV_INT_CLR = disr;                       /* A known issue on LPC214x */
  DeviceStatusValue = disr;

  /* Device Status Interrupt (Reset, Suspend/Resume, Connect change) */
  if (disr & DEV_STAT_INT) {
	DeviceInterruptCount++;

    WrCmd(CMD_GET_DEV_STAT);
    val = RdCmdDat(DAT_GET_DEV_STAT);       /* Device Status */
  	if ( val & DEV_RST )
		DevStatusReset++;
	if ( val & DEV_CON_CH )
		DevStatusConnectChange++;
	if ( val & DEV_CON )
		DevStatusConnect++;
	if ( val & DEV_SUS_CH ) {
	    DevStatusSuspendChange++;
	if ( val & DEV_SUS )
		DevStatusSuspend++;
	else
		DevStatusResume++;
	}

    if (val & DEV_RST) {                    /* Reset */
      USB_Reset();
#if   USB_RESET_EVENT
      USB_Reset_Event();
#endif
//      goto isr_end;
    }

    if (val & DEV_SUS_CH) {                 /* Suspend/Resume */
      if (val & DEV_SUS) {                  /* Suspend */
        USB_Suspend();
#if     USB_SUSPEND_EVENT
        USB_Suspend_Event();
#endif
      } else {                              /* Resume */
		USB_Resume();
#if     USB_RESUME_EVENT
        USB_Resume_Event();
#endif
      }
//      goto isr_end;
    }
    
    if (val & DEV_CON_CH ) {                 /* Connect change */
#if   USB_POWER_EVENT
      USB_Power_Event(val & DEV_CON);
#endif
//      goto isr_end;
    }
    goto isr_end;
  }

#if USB_SOF_EVENT
  /* Start of Frame Interrupt */
  if (disr & FRAME_INT) {
    USB_SOF_Event();
  }
#endif

#if USB_ERROR_EVENT
  /* Error Interrupt */
  if (disr & ERR_INT) {
    WrCmd(CMD_RD_ERR_STAT);
    val = RdCmdDat(DAT_RD_ERR_STAT);
    USB_Error_Event(val);
    goto isr_end;
  }
#endif

  /* Endpoint's Slow Interrupt */
  if (disr & EP_SLOW_INT) {

    while (EP_INT_STAT) {                   /* Endpoint Interrupt Status */

      for (n = 0; n < USB_EP_NUM; n++) {    /* Check All Endpoints */
        if (EP_INT_STAT & (1 << n)) {
          m = n >> 1;

          EP_INT_CLR = 1 << n;
          while ((DEV_INT_STAT & CDFULL_INT) == 0);
          val = CMD_DATA;

          if ((n & 1) == 0) {               /* OUT Endpoint */
            if (n == 0) {                   /* Control OUT Endpoint */
              if (val & EP_SEL_STP) {       /* Setup Packet */
                if (USB_P_EP[0]) {
                  USB_P_EP[0](USB_EVT_SETUP);
                  continue;
                }
              }
            }
            if (USB_P_EP[m]) {
              USB_P_EP[m](USB_EVT_OUT);
            }
          } else {                          /* IN Endpoint */
            if (USB_P_EP[m]) {
              USB_P_EP[m](USB_EVT_IN);
            }
          }
        }
      }
    }
  }

#if USB_DMA

  if (DMA_INT_STAT & 0x00000001) {          /* End of Transfer Interrupt */
    val = EOT_INT_STAT;
    for (n = 2; n < USB_EP_NUM; n++) {      /* Check All Endpoints */
      if (val & (1 << n)) {
        m = n >> 1;
        if ((n & 1) == 0) {                 /* OUT Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_OUT_DMA_EOT);
          }
        } else {                            /* IN Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_IN_DMA_EOT);
          }
        }
      }
    }
    EOT_INT_CLR = val;
  }

  if (DMA_INT_STAT & 0x00000002) {          /* New DD Request Interrupt */
    val = NDD_REQ_INT_STAT;
    for (n = 2; n < USB_EP_NUM; n++) {      /* Check All Endpoints */
      if (val & (1 << n)) {
        m = n >> 1;
        if ((n & 1) == 0) {                 /* OUT Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_OUT_DMA_NDR);
          }
        } else {                            /* IN Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_IN_DMA_NDR);
          }
        }
      }
    }
    NDD_REQ_INT_CLR = val;
  }

  if (DMA_INT_STAT & 0x00000004) {          /* System Error Interrupt */
    val = SYS_ERR_INT_STAT;
    for (n = 2; n < USB_EP_NUM; n++) {      /* Check All Endpoints */
      if (val & (1 << n)) {
        m = n >> 1;
        if ((n & 1) == 0) {                 /* OUT Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_OUT_DMA_ERR);
          }
        } else {                            /* IN Endpoint */
          if (USB_P_EP[m]) {
            USB_P_EP[m](USB_EVT_IN_DMA_ERR);
          }
        }
      }
    }
    SYS_ERR_INT_CLR = val;
  }
#endif /* USB_DMA */

isr_end:
//  DEV_INT_CLR = disr;
  VICVectAddr = 0;		/* Acknowledge Interrupt */
  return;
}
上一頁 12
?? 文件大小 31 K
?? 上傳用戶 littlefish
?? 所屬分類微處理器開發
??? 相關標簽

#2000 #ARM7 #KEIL #LPC
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? usbhw.c

?? 快捷鍵說明
