?? dsp281x_ev.h
字號:
//###########################################################################
//
// FILE: DSP281x_Ev.h
//
// TITLE: DSP281x Device Event Manager Register Definitions.
//
//###########################################################################
//
// Ver | dd mmm yyyy | Who | Description of changes
// =====|=============|======|===============================================
// 1.00| 11 Sep 2003 | L.H. | Changes since previous version (v.58 Alpha)
// | | | CAPCON, EXTCON and CAPFIFO register for EVA renamed CAPCONA
// | | | EXTCONA and CAPFIFOA. This is to be consistant
// | | | with other documentation. EVB was already correct.
// | | | Corrected bit definitions for GPTCONA & GPTCONB registers
// | | | T1CON and T2CON were using the same bit definitions. Split
// | | | this so the reserved bits in T1CON would be correct
// | | | T3CON and T4CON were using the same bit definitions. Split
// | | | this so the reserved bits in T3CON would be correct
// | | | Changed QEPIQEL to QEPIQUAL in EXTCONA/EXTCONB registers
// | | | Added bits that are active only when EXTCONA.0 = 1
// | | | to the COMCONA and COMCONB registers.
// | | | Changed CAPQEPN to CAP12EN in the CAPCONA register
// | | | Changed CAPQEPN to CAP45EN in the CAPCONB register
//###########################################################################
#ifndef DSP281x_EV_H
#define DSP281x_EV_H
#ifdef __cplusplus
extern "C" {
#endif
/* --------------------------------------------------- */
/* F2810/12 Event Manager (EV) GP Timer Registers */
/* */
/* ----------------------------------------------------*/
/* Overall Timer Control Register */
struct GPTCONA_BITS {
Uint16 T1PIN:2; // 1:0 Polarity of GP timer 1 compare
Uint16 T2PIN:2; // 3:2 Polarity of GP timer 2 compare
Uint16 T1CMPOE:1; // 4 Timer1 compare output
Uint16 T2CMPOE:1; // 5 Timer2 compare output
Uint16 TCMPOE:1; // 6 Compare output enable
Uint16 T1TOADC:2; // 8:7 Start ADC with timer 1 event
Uint16 T2TOADC:2; // 10:9 Start ADC with timer 2 event
Uint16 T1CTRIPE:1; // 11 Enable Timer 1 compare trip
Uint16 T2CTRIPE:1; // 12 Enable Timer 2 compare trip
Uint16 T1STAT:1; // 13 GP Timer 1 status (read only)
Uint16 T2STAT:1; // 14 GP Timer 2 status (read only)
Uint16 rsvd:1; // 15 reserved
};
/* Allow access to the bit fields or entire register */
union GPTCONA_REG {
Uint16 all;
struct GPTCONA_BITS bit;
};
struct GPTCONB_BITS {
Uint16 T3PIN:2; // 1:0 Polarity of GP timer 3 compare
Uint16 T4PIN:2; // 3:2 Polarity of GP timer 4 compare
Uint16 T3CMPOE:1; // 4 Timer3 compare output
Uint16 T4CMPOE:1; // 5 Timer4 compare output
Uint16 TCMPOE:1; // 6 Compare output enable
Uint16 T3TOADC:2; // 8:7 Start ADC with timer 3 event
Uint16 T4TOADC:2; // 10:9 Start ADC with timer 4 event
Uint16 T3CTRIPE:1; // 11 Timer 3 trip enable
Uint16 T4CTRIPE:1; // 12 Timer 4 trip enable
Uint16 T3STAT:1; // 13 GP Timer 3 status (read only)
Uint16 T4STAT:1; // 14 GP Timer 4 status (read only)
Uint16 rsvd2:1; // 15 reserved
};
/* Allow access to the bit fields or entire register */
union GPTCONB_REG {
Uint16 all;
struct GPTCONB_BITS bit;
};
/* Timer 1 Control Register bit defintions */
struct T1CON_BITS {
Uint16 rsvd1:1; // 0 reserved
Uint16 TECMPR:1; // 1 Timer compare enable
Uint16 TCLD10:2; // 3:2 Timer copare register reload
Uint16 TCLKS10:2; // 5:4 Clock source select
Uint16 TENABLE:1; // 6 Timer enable
Uint16 rsvd2:1; // 7 reserved
Uint16 TPS:3; // 10:8 Input clock prescaler
Uint16 TMODE:2; // 12:11 Count mode selection
Uint16 rsvd:1; // 13 reserved
Uint16 FREE:1; // 14 Free emulation control
Uint16 SOFT:1; // 15 Soft emulation control
};
/* Allow access to the bit fields or entire register */
union T1CON_REG {
Uint16 all;
struct T1CON_BITS bit;
};
/* Timer 2 Control Register bit defintions */
struct T2CON_BITS {
Uint16 SET1PR:1; // 0 Period register select
Uint16 TECMPR:1; // 1 Timer compare enable
Uint16 TCLD10:2; // 3:2 Timer copare register reload
Uint16 TCLKS10:2; // 5:4 Clock source select
Uint16 TENABLE:1; // 6 Timer enable
Uint16 T2SWT1:1; // 7 Start GP timer 2 with GP timer 1's enable
Uint16 TPS:3; // 10:8 Input clock prescaler
Uint16 TMODE:2; // 12:11 Count mode selection
Uint16 rsvd:1; // 13 reserved
Uint16 FREE:1; // 14 Free emulation control
Uint16 SOFT:1; // 15 Soft emulation control
};
/* Allow access to the bit fields or entire register */
union T2CON_REG {
Uint16 all;
struct T2CON_BITS bit;
};
/* Timer 3 Control Register bit defintions */
struct T3CON_BITS {
Uint16 rsvd1:1; // 0 reserved
Uint16 TECMPR:1; // 1 Timer compare enable
Uint16 TCLD10:2; // 3:2 Timer copare register reload
Uint16 TCLKS10:2; // 5:4 Clock source select
Uint16 TENABLE:1; // 6 Timer enable
Uint16 rsvd2:1; // 7 reserved
Uint16 TPS:3; // 10:8 Input clock prescaler
Uint16 TMODE:2; // 12:11 Count mode selection
Uint16 rsvd:1; // 13 reserved
Uint16 FREE:1; // 14 Free emulation control
Uint16 SOFT:1; // 15 Soft emulation control
};
/* Allow access to the bit fields or entire register */
union T3CON_REG {
Uint16 all;
struct T3CON_BITS bit;
};
/* Timer 4 Control Register bit defintions */
struct T4CON_BITS {
Uint16 SET3PR:1; // 0 Period register select
Uint16 TECMPR:1; // 1 Timer compare enable
Uint16 TCLD10:2; // 3:2 Timer copare register reload
Uint16 TCLKS10:2; // 5:4 Clock source select
Uint16 TENABLE:1; // 6 Timer enable
Uint16 T4SWT3:1; // 7 Start GP timer 2 with GP timer 1's enable
Uint16 TPS:3; // 10:8 Input clock prescaler
Uint16 TMODE:2; // 12:11 Count mode selection
Uint16 rsvd:1; // 13 reserved
Uint16 FREE:1; // 14 Free emulation control
Uint16 SOFT:1; // 15 Soft emulation control
};
/* Allow access to the bit fields or entire register */
union T4CON_REG {
Uint16 all;
struct T4CON_BITS bit;
};
struct EXTCONA_BITS {
Uint16 INDCOE:1; // 0 Independant compare output
Uint16 QEPIQUAL:1; // 1 QEP/CAP3 Index Qual Mode
Uint16 QEPIE:1; // 2 QEP index enable
Uint16 EVSOCE:1; // 3 EvA start of conversion output enable
Uint16 rsvd:12; // 15:4 reserved
};
/* Allow access to the bit fields or entire register */
union EXTCONA_REG {
Uint16 all;
struct EXTCONA_BITS bit;
};
struct EXTCONB_BITS {
Uint16 INDCOE:1; // 0 Independant compare output
Uint16 QEPIQUAL:1; // 1 QEP/CAP3 Index Qual Mode
Uint16 QEPIE:1; // 2 QEP index enable
Uint16 EVSOCE:1; // 3 EvB start of conversion output enable
Uint16 rsvd:12; // 15:4 reserved
};
/* Allow access to the bit fields or entire register */
union EXTCONB_REG {
Uint16 all;
struct EXTCONA_BITS bit;
};
/* Compare Control Register */
struct COMCONA_BITS {
Uint16 C1TRIPE:1; // 0 C1TRIP enable
Uint16 C2TRIPE:1; // 1 C2TRIP enable
Uint16 C3TRIPE:1; // 2 C3TRIP eanble
Uint16 rsvd:2; // 4:3 reserved
Uint16 FCMP1OE:1; // 5 Full compare 1 output enable
Uint16 FCMP2OE:1; // 6 Full compare 2 output enable
Uint16 FCMP3OE:1; // 7 Full compare 3 output enable
Uint16 PDPINTASTATUS:1;// 8 Current status of the PDPINTA pin
Uint16 FCOMPOE:1; // 9 Compare output enable
Uint16 ACTRLD:2; // 11:10 Action control register reload
Uint16 SVENABLE:1; // 12 Space vector PWM Mode enable
Uint16 CLD:2; // 14:13 Compare register reload condition
Uint16 CENABLE:1; // 15 Compare enable
};
/* Allow access to the bit fields or entire register */
union COMCONA_REG {
Uint16 all;
struct COMCONA_BITS bit;
};
struct COMCONB_BITS {
Uint16 C4TRIPE:1; // 0 C4TRIP enable
Uint16 C5TRIPE:1; // 1 C5TRIP enable
Uint16 C6TRIPE:1; // 2 C6TRIP eanble
Uint16 rsvd:2; // 4:3 reserved
Uint16 FCMP4OE:1; // 5 Full compare 4 output enable
Uint16 FCMP5OE:1; // 6 Full compare 5 output enable
Uint16 FCMP6OE:1; // 7 Full compare 6 output enable
Uint16 PDPINTBSTATUS:1;// 8 Current status of the PDPINTB pin
Uint16 FCOMPOE:1; // 9 Compare output enable
Uint16 ACTRLD:2; // 11:10 Action control register reload
Uint16 SVENABLE:1; // 12 Space vector PWM Mode enable
Uint16 CLD:2; // 14:13 Compare register reload condition
Uint16 CENABLE:1; // 15 Compare enable
};
/* Allow access to the bit fields or entire register */
union COMCONB_REG {
Uint16 all;
struct COMCONB_BITS bit;
};
/* Compare Action Control Register bit definitions */
struct ACTRA_BITS {
Uint16 CMP1ACT:2; // 1:0 Action on compare output pin 1 CMP1
Uint16 CMP2ACT:2; // 3:2 Action on compare output pin 2 CMP2
Uint16 CMP3ACT:2; // 5:4 Action on compare output pin 3 CMP3
Uint16 CMP4ACT:2; // 7:6 Action on compare output pin 4 CMP4
Uint16 CMP5ACT:2; // 9:8 Action on compare output pin 5 CMP5
Uint16 CMP6ACT:2; // 11:10 Action on compare output pin 6 CMP6
Uint16 D:3; // 14:12 Basic vector bits
Uint16 SVRDIR:1; // 15 Space vecor PWM rotation dir
};
/* Allow access to the bit fields or entire register */
union ACTRA_REG {
Uint16 all;
struct ACTRA_BITS bit;
};
struct ACTRB_BITS {
Uint16 CMP7ACT:2; // 1:0 Action on compare output pin 7 CMP7
Uint16 CMP8ACT:2; // 3:2 Action on compare output pin 8 CMP8
Uint16 CMP9ACT:2; // 5:4 Action on compare output pin 9 CMP9
Uint16 CMP10ACT:2; // 7:6 Action on compare output pin 10 CMP10
Uint16 CMP11ACT:2; // 9:8 Action on compare output pin 11 CMP11
Uint16 CMP12ACT:2; // 11:10 Action on compare output pin 12 CMP12
Uint16 D:3; // 14:12 Basic vector bits
Uint16 SVRDIR:1; // 15 Space vecor PWM rotation dir
};
/* Allow access to the bit fields or entire register */
union ACTRB_REG {
Uint16 all;
struct ACTRB_BITS bit;
};
/* Dead-Band Timer Control register bit definitions */
struct DBTCON_BITS {
Uint16 rsvd1:2; // 1:0 reserved
Uint16 DBTPS:3; // 4:2 Dead-Band timer prescaler
Uint16 EDBT1:1; // 5 Dead-Band timer 1 enable
Uint16 EDBT2:1; // 6 Dead-Band timer 2 enable
Uint16 EDBT3:1; // 7 Dead-Band timer 3 enable
Uint16 DBT:4; // 11:8 Dead-Band timer period
Uint16 rsvd2:4; // 15:12 reserved
};
/* Allow access to the bit fields or entire register */
union DBTCON_REG {
Uint16 all;
struct DBTCON_BITS bit;
};
/* Capture Control register bit definitions */
struct CAPCONA_BITS {
Uint16 rsvd1:2; // 1:0 reserved
Uint16 CAP3EDGE:2; // 3:2 Edge Detection for Unit 3
Uint16 CAP2EDGE:2; // 5:4 Edge Detection for Unit 2
Uint16 CAP1EDGE:2; // 7:6 Edge Detection for Unit 1
Uint16 CAP3TOADC:1; // 8 Unit 3 starts the ADC
Uint16 CAP12TSEL:1; // 9 GP Timer selection for Units 1 and 2
Uint16 CAP3TSEL:1; // 10 GP Timer selection for Unit 3
Uint16 rsvd2:1; // 11 reserved
Uint16 CAP3EN:1; // 12 Capture Unit 3 enable
Uint16 CAP12EN:2; // 14:13 Capture Unit 1 and 2 enable
Uint16 CAPRES:1; // 15 Capture reset (always reads 0)
};
/* Allow access to the bit fields or entire register */
union CAPCONA_REG {
Uint16 all;
struct CAPCONA_BITS bit;
};
/* Control register bit definitions */
struct CAPCONB_BITS {
Uint16 rsvd1:2; // 1:0 reserved
Uint16 CAP6EDGE:2; // 3:2 Edge Detection for Unit 6
Uint16 CAP5EDGE:2; // 5:4 Edge Detection for Unit 5
Uint16 CAP4EDGE:2; // 7:6 Edge Detection for Unit 4
Uint16 CAP6TOADC:1; // 8 Unit 6 starts the ADC
Uint16 CAP45TSEL:1; // 9 GP Timer selection for Units 4 and 5
Uint16 CAP6TSEL:1; // 10 GP Timer selection for Unit 6
Uint16 rsvd2:1; // 11 reserved
Uint16 CAP6EN:1; // 12 Capture Unit 6 control
Uint16 CAP45EN:2; // 14:13 Capture Unit 4 and 5 control
Uint16 CAPRES:1; // 15 Capture reset (always reads 0)
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -