// Scintilla source code edit control
/** @file RESearch.cxx
 ** Regular expression search library.
 **/

/*
 * regex - Regular expression pattern matching and replacement
 *
 * By:  Ozan S. Yigit (oz)
 *      Dept. of Computer Science
 *      York University
 *
 * Original code available from http://www.cs.yorku.ca/~oz/
 * Translation to C++ by Neil Hodgson neilh@scintilla.org
 * Removed all use of register.
 * Converted to modern function prototypes.
 * Put all global/static variables into an object so this code can be
 * used from multiple threads, etc.
 *
 * These routines are the PUBLIC DOMAIN equivalents of regex
 * routines as found in 4.nBSD UN*X, with minor extensions.
 *
 * These routines are derived from various implementations found
 * in software tools books, and Conroy's grep. They are NOT derived
 * from licensed/restricted software.
 * For more interesting/academic/complicated implementations,
 * see Henry Spencer's regexp routines, or GNU Emacs pattern
 * matching module.
 *
 * Modification history removed.
 *
 * Interfaces:
 *  RESearch::Compile:      compile a regular expression into a NFA.
 *
 *          const char *RESearch::Compile(const char *pat, int length,
 *                                        bool caseSensitive, bool posix)
 *
 * Returns a short error string if they fail.
 *
 *  RESearch::Execute:      execute the NFA to match a pattern.
 *
 *          int RESearch::Execute(characterIndexer &ci, int lp, int endp)
 *
 *  RESearch::Substitute:   substitute the matched portions in a new string.
 *
 *          int RESearch::Substitute(CharacterIndexer &ci, char *src, char *dst)
 *
 *  re_fail:                failure routine for RESearch::Execute. (no longer used)
 *
 *          void re_fail(char *msg, char op)
 *
 * Regular Expressions:
 *
 *      [1]     char    matches itself, unless it is a special
 *                      character (metachar): . \ [ ] * + ^ $
 *                      and ( ) if posix option.
 *
 *      [2]     .       matches any character.
 *
 *      [3]     \       matches the character following it, except:
 *                      - \a, \b, \f, \n, \t, \v match the
 *                      corresponding C escape char;
 *                      - if not in posix mode, when followed by a
 *                      left or right round bracket (see [7]);
 *                      - when followed by a digit 1 to 9 (see [8]);
 *                      - when followed by a left or right angle bracket
 *                      (see [9]).
 *                      It is used as an escape character for all
 *                      other meta-characters, and itself. When used
 *                      in a set ([4]), it is treated as an ordinary
 *                      character (except for escape chars).
 *
 *      [4]     [set]   matches one of the characters in the set.
 *                      If the first character in the set is "^",
 *                      it matches a character NOT in the set, i.e.
 *                      complements the set. A shorthand S-E (start-end)
 *                      is used to specify a set of characters S upto
 *                      E, inclusive. The special characters "]" and
 *                      "-" have no special meaning if they appear
 *                      as the first chars in the set. To include both,
 *                      put - first: [-]A-Z]:
 *                      [-]|] matches these 2 chars,
 *                      []-|] matches from ] to | chars.
 *                      examples:        match:
 *
 *                              [a-z]    any lowercase alpha
 *
 *                              [^-]]    any char except - and ]
 *
 *                              [^A-Z]   any char except uppercase
 *                                       alpha
 *
 *                              [a-zA-Z] any alpha
 *
 *      [5]     *       any regular expression form [1] to [4], followed by
 *                      closure char (*) matches zero or more matches of
 *                      that form.
 *
 *      [6]     +       same as [5], except it matches one or more.
 *
 *      [7]             a regular expression in the form [1] to [10], enclosed
 *                      as \(form\) (or (form) with posix flag) matches what
 *                      form matches. The enclosure creates a set of tags,
 *                      used for [8] and for pattern substitution.
 *                      The tagged forms are numbered starting from 1.
 *
 *      [8]             a \ followed by a digit 1 to 9 matches whatever a
 *                      previously tagged regular expression ([7]) matched.
 *
 *      [9]     \<      a regular expression starting with a \< construct
 *              \>      and/or ending with a \> construct, restricts the
 *                      pattern matching to the beginning of a word, and/or
 *                      the end of a word. A word is defined to be a character
 *                      string beginning and/or ending with the characters
 *                      A-Z a-z 0-9 and _. It must also be preceded and/or
 *                      followed by any character outside those mentioned.
 *
 *      [10]            a composite regular expression xy where x and y
 *                      are in the form [1] to [10] matches the longest
 *                      match of x followed by a match for y.
 *
 *      [11]    ^       a regular expression starting with a ^ character
 *              $       and/or ending with a $ character, restricts the
 *                      pattern matching to the beginning of the line,
 *                      or the end of line. [anchors] Elsewhere in the
 *                      pattern, ^ and $ are treated as ordinary characters.
 *
 *
 * Acknowledgements:
 *
 *  HCR's Hugh Redelmeier has been most helpful in various
 *  stages of development. He convinced me to include BOW
 *  and EOW constructs, originally invented by Rob Pike at
 *  the University of Toronto.
 *
 * References:
 *              Software tools                  Kernighan & Plauger
 *              Software tools in Pascal        Kernighan & Plauger
 *              Grep [rsx-11 C dist]            David Conroy
 *              ed - text editor                Un*x Programmer's Manual
 *              Advanced editing on Un*x        B. W. Kernighan
 *              RegExp routines                 Henry Spencer
 *
 * Notes:
 *
 *	This implementation uses a bit-set representation for character
 *	classes for speed and compactness. Each character is represented
 *	by one bit in a 256-bit block. Thus, CCL always takes a
 *	constant 32 bytes in the internal nfa, and RESearch::Execute does a single
 *	bit comparison to locate the character in the set.
 *
 * Examples:
 *
 *  pattern:    foo*.*
 *  compile:    CHR f CHR o CLO CHR o END CLO ANY END END
 *  matches:    fo foo fooo foobar fobar foxx ...
 *
 *  pattern:    fo[ob]a[rz]
 *  compile:    CHR f CHR o CCL bitset CHR a CCL bitset END
 *  matches:    fobar fooar fobaz fooaz
 *
 *  pattern:    foo\\+
 *  compile:    CHR f CHR o CHR o CHR \ CLO CHR \ END END
 *  matches:    foo\ foo\\ foo\\\  ...
 *
 *  pattern:    \(foo\)[1-3]\1  (same as foo[1-3]foo)
 *  compile:    BOT 1 CHR f CHR o CHR o EOT 1 CCL bitset REF 1 END
 *  matches:    foo1foo foo2foo foo3foo
 *
 *  pattern:    \(fo.*\)-\1
 *  compile:    BOT 1 CHR f CHR o CLO ANY END EOT 1 CHR - REF 1 END
 *  matches:    foo-foo fo-fo fob-fob foobar-foobar ...
 */

#include "CharClassify.h"
#include "RESearch.h"

// Shut up annoying Visual C++ warnings:
#ifdef _MSC_VER
#pragma warning(disable: 4514)
#endif

#define OKP     1
#define NOP     0

#define CHR     1
#define ANY     2
#define CCL     3
#define BOL     4
#define EOL     5
#define BOT     6
#define EOT     7
#define BOW     8
#define EOW     9
#define REF     10
#define CLO     11

#define END     0

/*
 * The following defines are not meant to be changeable.
 * They are for readability only.
 */
#define BLKIND  0370
#define BITIND  07

const char bitarr[] = {1,2,4,8,16,32,64,'\200'};

#define badpat(x)	(*nfa = END, x)

/*
 * Character classification table for word boundary operators BOW
 * and EOW is passed in by the creator of this object (Scintilla
 * Document). The Document default state is that word chars are:
 * 0-9,a-z, A-Z and _
 */

RESearch::RESearch(CharClassify *charClassTable) {
	charClass = charClassTable;
	Init();
}

RESearch::~RESearch() {
	Clear();
}

void RESearch::Init() {
	sta = NOP;                  /* status of lastpat */
	bol = 0;
	for (int i=0; i<MAXTAG; i++)
		pat[i] = 0;
	for (int j=0; j<BITBLK; j++)
		bittab[j] = 0;
}

void RESearch::Clear() {
	for (int i=0; i<MAXTAG; i++) {
		delete []pat[i];
		pat[i] = 0;
		bopat[i] = NOTFOUND;
		eopat[i] = NOTFOUND;
	}
}

bool RESearch::GrabMatches(CharacterIndexer &ci) {
	bool success = true;
	for (unsigned int i=0; i<MAXTAG; i++) {
		if ((bopat[i] != NOTFOUND) && (eopat[i] != NOTFOUND)) {
			unsigned int len = eopat[i] - bopat[i];
			pat[i] = new char[len + 1];
			if (pat[i]) {
				for (unsigned int j=0; j<len; j++)
					pat[i][j] = ci.CharAt(bopat[i] + j);
				pat[i][len] = '\0';
			} else {
				success = false;
			}
		}
	}
	return success;
}

void RESearch::ChSet(char c) {
	bittab[((c) & BLKIND) >> 3] |= bitarr[(c) & BITIND];
}

void RESearch::ChSetWithCase(char c, bool caseSensitive) {
	if (caseSensitive) {
		ChSet(c);
	} else {
		if ((c >= 'a') && (c <= 'z')) {
			ChSet(c);
			ChSet(static_cast<char>(c - 'a' + 'A'));
		} else if ((c >= 'A') && (c <= 'Z')) {
			ChSet(c);
			ChSet(static_cast<char>(c - 'A' + 'a'));
		} else {
			ChSet(c);
		}
	}
}

const char escapeValue(char ch) {
	switch (ch) {
	case 'a':	return '\a';
	case 'b':	return '\b';
	case 'f':	return '\f';
	case 'n':	return '\n';
	case 'r':	return '\r';
	case 't':	return '\t';
	case 'v':	return '\v';
	}
	return 0;
}

const char *RESearch::Compile(const char *pat, int length, bool caseSensitive, bool posix) {
	char *mp=nfa;          /* nfa pointer       */
	char *lp;              /* saved pointer     */
	char *sp=nfa;          /* another one       */
	char *mpMax = mp + MAXNFA - BITBLK - 10;

	int tagi = 0;          /* tag stack index   */
	int tagc = 1;          /* actual tag count  */

	int n;
	char mask;             /* xor mask -CCL/NCL */
	int c1, c2;

	if (!pat || !length)
		if (sta)
			return 0;
		else
			return badpat("No previous regular expression");
	sta = NOP;

	const char *p=pat;     /* pattern pointer   */
	for (int i=0; i<length; i++, p++) {
		if (mp > mpMax)
			return badpat("Pattern too long");
		lp = mp;
		switch(*p) {

		case '.':               /* match any char  */
			*mp++ = ANY;
			break;

		case '^':               /* match beginning */
			if (p == pat)
				*mp++ = BOL;
			else {
				*mp++ = CHR;
				*mp++ = *p;
			}
			break;

		case '$':               /* match endofline */
			if (!*(p+1))
				*mp++ = EOL;
			else {
				*mp++ = CHR;
				*mp++ = *p;
			}
			break;

		case '[':               /* match char class */
			*mp++ = CCL;

			i++;
			if (*++p == '^') {
				mask = '\377';
				i++;
				p++;
			} else
				mask = 0;

			if (*p == '-') {	/* real dash */
				i++;
				ChSet(*p++);
			}
			if (*p == ']') {	/* real brace */
				i++;
				ChSet(*p++);
			}
			while (*p && *p != ']') {
				if (*p == '-' && *(p+1) && *(p+1) != ']') {
					i++;
					p++;
					c1 = *(p-2) + 1;
					i++;
					c2 = *p++;
					while (c1 <= c2) {
						ChSetWithCase(static_cast<char>(c1++), caseSensitive);
					}
				} else if (*p == '\\' && *(p+1)) {
					i++;
					p++;
					char escape = escapeValue(*p);
					if (escape)
						ChSetWithCase(escape, caseSensitive);
					else
						ChSetWithCase(*p, caseSensitive);
					i++;
					p++;
				} else {
					i++;
					ChSetWithCase(*p++, caseSensitive);
				}
			}
			if (!*p)
				return badpat("Missing ]");

			for (n = 0; n < BITBLK; bittab[n++] = (char) 0)
				*mp++ = static_cast<char>(mask ^ bittab[n]);

			break;