?? abstract.txt
字號:
This example program shows how to use the RTX CAN Driver
on 'Keil MCB2300 Evaluation Board' with Philips LPC2378
microcontroller.
Example functionality:
- send converted analog value in first byte in CAN message
on CAN 2 controller every 1 second
CAN 2 controller speed: 500 kbits
- display received byte on CAN 1 controller in hexadecimal
representation on 8 LEDs
CAN 1 controller speed: 500 kbits
This example shows how to use RTX CAN Driver and how
to simulate analog input in uVision.
You may change the value of analog input with potentiometer
and watch the value on 8 LEDs change accordingly.
The CAN_Ex1 example program is available for several targets:
Simulator: uVision Simulator for evaluation
LPC2300 Flash: Philips LPC23x8 internal Flash
Notes:
- To see the example functionality on hardware, loopback has
to be connected between CAN1 and CAN2 (pins 7 on both DB-9
headers shorted, and pins 2 on both DB-9 headers shorted)
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -