******************************************************************************/
RETURN_CODE
PlxChip_DmaTransferBlock(
    DEVICE_EXTENSION *pdx,
    U8                channel,
    PLX_DMA_PARAMS   *pParams
    )
{
    U8    shift;
    U16   OffsetDmaMode;
    U32   RegValue;
    KIRQL OriginalIrqL;


    // Verify DMA channel & setup register offsets
    switch (channel)
    {
        case 0:
            OffsetDmaMode = PCI9056_DMA0_MODE;
            break;

        case 1:
            OffsetDmaMode = PCI9056_DMA1_MODE;
            break;

        default:
            DebugPrintf(("ERROR - Invalid DMA channel\n"));
            return ApiDmaChannelInvalid;
    }

    // Set shift for status register
    shift = (channel * 8);

    // Verify that DMA is not in progress
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            PCI9056_DMA_COMMAND_STAT
            );

    if ((RegValue & ((1 << 4) << shift)) == 0)
    {
        DebugPrintf(("ERROR - DMA channel is currently active\n"));
        return ApiDmaInProgress;
    }

    KeAcquireSpinLock(
        &(pdx->Lock_DmaChannel),
        &OriginalIrqL
        );

    // Verify DMA channel was opened
    if (pdx->DmaInfo[channel].bOpen == FALSE)
    {
        DebugPrintf(("ERROR - DMA channel has not been opened\n"));

        KeReleaseSpinLock(
            &(pdx->Lock_DmaChannel),
            OriginalIrqL
            );

        return ApiDmaChannelUnavailable;
    }

    KeReleaseSpinLock(
        &(pdx->Lock_DmaChannel),
        OriginalIrqL
        );

    KeAcquireSpinLock(
        &(pdx->Lock_HwAccess),
        &OriginalIrqL
        );

    // Get DMA mode
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            OffsetDmaMode
            );

    // Disable DMA chaining
    RegValue &= ~(1 << 9);

    // Enable interrupt & route interrupt to PCI
    RegValue |= (1 << 10) | (1 << 17);

    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode,
        RegValue
        );

    // Write PCI Address
    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode + 0x4,
        pParams->u.PciAddrLow
        );

    // Write Local Address
    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode + 0x8,
        pParams->LocalAddr
        );

    // Write Transfer Count
    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode + 0xc,
        pParams->ByteCount
        );

    // Write Descriptor Pointer
    RegValue = (pParams->TerminalCountIntr << 2) |
               (pParams->LocalToPciDma     << 3);

    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode + 0x10,
        RegValue
        );

    // Enable DMA channel
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            PCI9056_DMA_COMMAND_STAT
            );

    PLX_9000_REG_WRITE(
        pdx,
        PCI9056_DMA_COMMAND_STAT,
        RegValue | ((1 << 0) << shift)
        );

    KeReleaseSpinLock(
        &(pdx->Lock_HwAccess),
        OriginalIrqL
        );

    DebugPrintf(("Starting DMA transfer...\n"));

    // Start DMA
    PLX_9000_REG_WRITE(
        pdx,
        PCI9056_DMA_COMMAND_STAT,
        RegValue | (((1 << 0) | (1 << 1)) << shift)
        );

    return ApiSuccess;
}




/******************************************************************************
 *
 * Function   :  PlxChip_DmaTransferUserBuffer
 *
 * Description:  Transfers a user-mode buffer using SGL DMA
 *
 ******************************************************************************/
RETURN_CODE
PlxChip_DmaTransferUserBuffer(
    DEVICE_EXTENSION *pdx,
    U8                channel,
    PLX_DMA_PARAMS   *pParams
    )
{
    U8          i;
    U8          shift;
    U16         OffsetDmaMode;
    U32         RegValue;
    U32         SglPciAddress;
    KIRQL       OriginalIrqL;
    RETURN_CODE rc;


    // Verify DMA channel & setup register offsets
    switch (channel)
    {
        case 0:
            OffsetDmaMode = PCI9056_DMA0_MODE;
            break;

        case 1:
            OffsetDmaMode = PCI9056_DMA1_MODE;
            break;

        default:
            DebugPrintf(("ERROR - Invalid DMA channel\n"));
            return ApiDmaChannelInvalid;
    }

    // For code readability
    i = channel;

    // Set shift for status register
    shift = (channel * 8);

    // Verify that DMA is not in progress
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            PCI9056_DMA_COMMAND_STAT
            );

    if ((RegValue & ((1 << 4) << shift)) == 0)
    {
        DebugPrintf(("ERROR - DMA channel is currently active\n"));
        return ApiDmaInProgress;
    }

    KeAcquireSpinLock(
        &(pdx->Lock_DmaChannel),
        &OriginalIrqL
        );

    // Verify DMA channel was opened
    if (pdx->DmaInfo[i].bOpen == FALSE)
    {
        DebugPrintf(("ERROR - DMA channel has not been opened\n"));

        KeReleaseSpinLock(
            &(pdx->Lock_DmaChannel),
            OriginalIrqL
            );

        return ApiDmaChannelUnavailable;
    }

    // Verify an SGL DMA transfer is not pending
    if (pdx->DmaInfo[i].bSglPending)
    {
        DebugPrintf(("ERROR - An SGL DMA transfer is currently pending\n"));

        KeReleaseSpinLock(
            &(pdx->Lock_DmaChannel),
            OriginalIrqL
            );

        return ApiDmaInProgress;
    }

    // Set the SGL DMA pending flag
    pdx->DmaInfo[i].bSglPending = TRUE;

    KeReleaseSpinLock(
        &(pdx->Lock_DmaChannel),
        OriginalIrqL
        );

    // Get DMA mode
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            OffsetDmaMode
            );

    // Keep track if local address should remain constant
    if (RegValue & (1 << 11))
        pdx->DmaInfo[i].bLocalAddrConstant = TRUE;
    else
        pdx->DmaInfo[i].bLocalAddrConstant = FALSE;

    // Enable DMA chaining, interrupt, & route interrupt to PCI
    RegValue |= (1 << 9) | (1 << 10) | (1 << 17);

    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode,
        RegValue
        );

    // Page-lock user buffer & build SGL
    rc =
        PlxLockBufferAndBuildSgl(
            pdx,
            i,
            pParams,
            &SglPciAddress
            );

    if (rc != ApiSuccess)
    {
        DebugPrintf(("ERROR - Unable to lock buffer and build SGL list\n"));
        pdx->DmaInfo[i].bSglPending = FALSE;
        return rc;
    }

    KeAcquireSpinLock(
        &(pdx->Lock_HwAccess),
        &OriginalIrqL
        );

    // Write SGL physical address & set descriptors in PCI space
    PLX_9000_REG_WRITE(
        pdx,
        OffsetDmaMode + 0x10,
        SglPciAddress | (1 << 0)
        );

    // Enable DMA channel
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            PCI9056_DMA_COMMAND_STAT
            );

    PLX_9000_REG_WRITE(
        pdx,
        PCI9056_DMA_COMMAND_STAT,
        RegValue | ((1 << 0) << shift)
        );

    KeReleaseSpinLock(
        &(pdx->Lock_HwAccess),
        OriginalIrqL
        );

    DebugPrintf(("Starting DMA transfer...\n"));

    // Start DMA
    PLX_9000_REG_WRITE(
        pdx,
        PCI9056_DMA_COMMAND_STAT,
        RegValue | (((1 << 0) | (1 << 1)) << shift)
        );

    return ApiSuccess;
}




/******************************************************************************
 *
 * Function   :  PlxChip_DmaChannelClose
 *
 * Description:  Close a previously opened channel
 *
 ******************************************************************************/
RETURN_CODE
PlxChip_DmaChannelClose(
    DEVICE_EXTENSION *pdx,
    U8                channel,
    BOOLEAN           bCheckInProgress
    )
{
    U8    i;
    U32   RegValue;
    KIRQL OriginalIrqL;


    DebugPrintf((
        "Closing DMA channel %d...\n",
        channel
        ));

    // Verify valid DMA channel
    switch (channel)
    {
        case 0:
        case 1:
            i = channel;
            break;

        default:
            DebugPrintf(("ERROR - Invalid DMA channel\n"));
            return ApiDmaChannelInvalid;
    }

    // Verify DMA channel was opened
    if (pdx->DmaInfo[i].bOpen == FALSE)
    {
        DebugPrintf(("ERROR - DMA channel has not been opened\n"));
        return ApiDmaChannelUnavailable;
    }

    // Check DMA status
    RegValue =
        PLX_9000_REG_READ(
            pdx,
            PCI9056_DMA_COMMAND_STAT
            );

    // Shift status for channel 1
    if (channel == 1)
        RegValue = RegValue >> 8;

    // Verify DMA is not in progress
    if ((RegValue & (1 << 4)) == 0)
    {
        // DMA is still in progress
        if (bCheckInProgress)
        {
            if (RegValue & (1 << 0))
                return ApiDmaInProgress;
            else
                return ApiDmaPaused;
        }

        DebugPrintf(("DMA in progress, aborting...\n"));

        // Force DMA abort, which may generate a DMA done interrupt
        PlxChip_DmaControl(
            pdx,
            channel,
            DmaAbort
            );
    }

    KeAcquireSpinLock(
        &(pdx->Lock_DmaChannel),
        &OriginalIrqL
        );

    // Close the channel
    pdx->DmaInfo[i].bOpen = FALSE;

    // Clear owner information
    pdx->DmaInfo[i].pOwner = NULL;

    KeReleaseSpinLock(
        &(pdx->Lock_DmaChannel),
        OriginalIrqL
        );

    // If DMA is hung, an SGL transfer could be pending, so release user buffer
    if (pdx->DmaInfo[i].bSglPending)
    {
        PlxSglDmaTransferComplete(
            pdx,
            i
            );
    }

    // Release memory previously used for SGL descriptors
    if (pdx->DmaInfo[i].SglBuffer.pKernelVa != NULL)
    {
        DebugPrintf((
            "Releasing memory used for SGL descriptors...\n"
            ));

        Plx_dma_buffer_free(
            pdx,
            &pdx->DmaInfo[i].SglBuffer
            );
    }

    return ApiSuccess;
}