?? at91sam7x256_adc.h
字號:
/* linux/include/asm-arm/arch-at91sam7x256/at91sam7x256_adc.h
*
* Hardware definition for the adc peripheral in the ATMEL at91sam7x256 processor
*
* Generated 11/02/2005 (15:17:30) AT91 SW Application Group from ADC_6051C V1.1
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __AT91SAM7X256_ADC_H
#define __AT91SAM7X256_ADC_H
/* -------------------------------------------------------- */
/* ADC ID definitions for AT91SAM7X256 */
/* -------------------------------------------------------- */
#ifndef AT91C_ID_ADC
#define AT91C_ID_ADC 17 /**< Analog-to-Digital Converter id */
#endif /* AT91C_ID_ADC */
/* -------------------------------------------------------- */
/* ADC Base Address definitions for AT91SAM7X256 */
/* -------------------------------------------------------- */
#define AT91C_BASE_ADC 0xFFFD8000 /**< ADC base address */
/* -------------------------------------------------------- */
/* PIO definition for ADC hardware peripheral */
/* -------------------------------------------------------- */
#define AT91C_PB18_ADTRG (1 << 18) /**< ADC External Trigger */
/* -------------------------------------------------------- */
/* Register offset definition for ADC hardware peripheral */
/* -------------------------------------------------------- */
#define ADC_CR (0x0000) /**< ADC Control Register */
#define ADC_MR (0x0004) /**< ADC Mode Register */
#define ADC_CHER (0x0010) /**< ADC Channel Enable Register */
#define ADC_CHDR (0x0014) /**< ADC Channel Disable Register */
#define ADC_CHSR (0x0018) /**< ADC Channel Status Register */
#define ADC_SR (0x001C) /**< ADC Status Register */
#define ADC_LCDR (0x0020) /**< ADC Last Converted Data Register */
#define ADC_IER (0x0024) /**< ADC Interrupt Enable Register */
#define ADC_IDR (0x0028) /**< ADC Interrupt Disable Register */
#define ADC_IMR (0x002C) /**< ADC Interrupt Mask Register */
#define ADC_CDR0 (0x0030) /**< ADC Channel Data Register 0 */
#define ADC_CDR1 (0x0034) /**< ADC Channel Data Register 1 */
#define ADC_CDR2 (0x0038) /**< ADC Channel Data Register 2 */
#define ADC_CDR3 (0x003C) /**< ADC Channel Data Register 3 */
#define ADC_CDR4 (0x0040) /**< ADC Channel Data Register 4 */
#define ADC_CDR5 (0x0044) /**< ADC Channel Data Register 5 */
#define ADC_CDR6 (0x0048) /**< ADC Channel Data Register 6 */
#define ADC_CDR7 (0x004C) /**< ADC Channel Data Register 7 */
#define ADC_RPR (0x0100) /**< Receive Pointer Register */
#define ADC_RCR (0x0104) /**< Receive Counter Register */
#define ADC_TPR (0x0108) /**< Transmit Pointer Register */
#define ADC_TCR (0x010C) /**< Transmit Counter Register */
#define ADC_RNPR (0x0110) /**< Receive Next Pointer Register */
#define ADC_RNCR (0x0114) /**< Receive Next Counter Register */
#define ADC_TNPR (0x0118) /**< Transmit Next Pointer Register */
#define ADC_TNCR (0x011C) /**< Transmit Next Counter Register */
#define ADC_PTCR (0x0120) /**< PDC Transfer Control Register */
#define ADC_PTSR (0x0124) /**< PDC Transfer Status Register */
/* -------------------------------------------------------- */
/* Bitfields definition for ADC hardware peripheral */
/* -------------------------------------------------------- */
/* --- Register ADC_CR */
#define AT91C_ADC_SWRST (0x1 << 0 ) /**< (ADC) Software Reset */
#define AT91C_ADC_START (0x1 << 1 ) /**< (ADC) Start Conversion */
/* --- Register ADC_MR */
#define AT91C_ADC_TRGEN (0x1 << 0 ) /**< (ADC) Trigger Enable */
#define AT91C_ADC_TRGEN_DIS 0x0 /**< (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software */
#define AT91C_ADC_TRGEN_EN 0x1 /**< (ADC) Hardware trigger selected by TRGSEL field is enabled. */
#define AT91C_ADC_TRGSEL (0x7 << 1 ) /**< (ADC) Trigger Selection */
#define AT91C_ADC_TRGSEL_TIOA0 (0x0 << 1) /**< (ADC) Selected TRGSEL = TIAO0 */
#define AT91C_ADC_TRGSEL_TIOA1 (0x1 << 1) /**< (ADC) Selected TRGSEL = TIAO1 */
#define AT91C_ADC_TRGSEL_TIOA2 (0x2 << 1) /**< (ADC) Selected TRGSEL = TIAO2 */
#define AT91C_ADC_TRGSEL_TIOA3 (0x3 << 1) /**< (ADC) Selected TRGSEL = TIAO3 */
#define AT91C_ADC_TRGSEL_TIOA4 (0x4 << 1) /**< (ADC) Selected TRGSEL = TIAO4 */
#define AT91C_ADC_TRGSEL_TIOA5 (0x5 << 1) /**< (ADC) Selected TRGSEL = TIAO5 */
#define AT91C_ADC_TRGSEL_EXT (0x6 << 1) /**< (ADC) Selected TRGSEL = External Trigger */
#define AT91C_ADC_LOWRES (0x1 << 4 ) /**< (ADC) Resolution. */
#define AT91C_ADC_LOWRES_10_BIT (0x0 << 4) /**< (ADC) 10-bit resolution */
#define AT91C_ADC_LOWRES_8_BIT (0x1 << 4) /**< (ADC) 8-bit resolution */
#define AT91C_ADC_SLEEP (0x1 << 5 ) /**< (ADC) Sleep Mode */
#define AT91C_ADC_SLEEP_NORMAL_MODE (0x0 << 5) /**< (ADC) Normal Mode */
#define AT91C_ADC_SLEEP_MODE (0x1 << 5) /**< (ADC) Sleep Mode */
#define AT91C_ADC_PRESCAL (0x3F << 8 ) /**< (ADC) Prescaler rate selection */
#define AT91C_ADC_STARTUP (0x1F << 16) /**< (ADC) Startup Time */
#define AT91C_ADC_SHTIM (0xF << 24) /**< (ADC) Sample & Hold Time */
/* --- Register ADC_CHER */
#define AT91C_ADC_CH0 (0x1 << 0 ) /**< (ADC) Channel 0 */
#define AT91C_ADC_CH1 (0x1 << 1 ) /**< (ADC) Channel 1 */
#define AT91C_ADC_CH2 (0x1 << 2 ) /**< (ADC) Channel 2 */
#define AT91C_ADC_CH3 (0x1 << 3 ) /**< (ADC) Channel 3 */
#define AT91C_ADC_CH4 (0x1 << 4 ) /**< (ADC) Channel 4 */
#define AT91C_ADC_CH5 (0x1 << 5 ) /**< (ADC) Channel 5 */
#define AT91C_ADC_CH6 (0x1 << 6 ) /**< (ADC) Channel 6 */
#define AT91C_ADC_CH7 (0x1 << 7 ) /**< (ADC) Channel 7 */
/* --- Register ADC_CHDR */
#define AT91C_ADC_CH0 (0x1 << 0 ) /**< (ADC) Channel 0 */
#define AT91C_ADC_CH1 (0x1 << 1 ) /**< (ADC) Channel 1 */
#define AT91C_ADC_CH2 (0x1 << 2 ) /**< (ADC) Channel 2 */
#define AT91C_ADC_CH3 (0x1 << 3 ) /**< (ADC) Channel 3 */
#define AT91C_ADC_CH4 (0x1 << 4 ) /**< (ADC) Channel 4 */
#define AT91C_ADC_CH5 (0x1 << 5 ) /**< (ADC) Channel 5 */
#define AT91C_ADC_CH6 (0x1 << 6 ) /**< (ADC) Channel 6 */
#define AT91C_ADC_CH7 (0x1 << 7 ) /**< (ADC) Channel 7 */
/* --- Register ADC_CHSR */
#define AT91C_ADC_CH0 (0x1 << 0 ) /**< (ADC) Channel 0 */
#define AT91C_ADC_CH1 (0x1 << 1 ) /**< (ADC) Channel 1 */
#define AT91C_ADC_CH2 (0x1 << 2 ) /**< (ADC) Channel 2 */
#define AT91C_ADC_CH3 (0x1 << 3 ) /**< (ADC) Channel 3 */
#define AT91C_ADC_CH4 (0x1 << 4 ) /**< (ADC) Channel 4 */
#define AT91C_ADC_CH5 (0x1 << 5 ) /**< (ADC) Channel 5 */
#define AT91C_ADC_CH6 (0x1 << 6 ) /**< (ADC) Channel 6 */
#define AT91C_ADC_CH7 (0x1 << 7 ) /**< (ADC) Channel 7 */
/* --- Register ADC_SR */
#define AT91C_ADC_EOC0 (0x1 << 0 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC1 (0x1 << 1 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC2 (0x1 << 2 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC3 (0x1 << 3 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC4 (0x1 << 4 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC5 (0x1 << 5 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC6 (0x1 << 6 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC7 (0x1 << 7 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_OVRE0 (0x1 << 8 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE1 (0x1 << 9 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE2 (0x1 << 10) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE3 (0x1 << 11) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE4 (0x1 << 12) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE5 (0x1 << 13) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE6 (0x1 << 14) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE7 (0x1 << 15) /**< (ADC) Overrun Error */
#define AT91C_ADC_DRDY (0x1 << 16) /**< (ADC) Data Ready */
#define AT91C_ADC_GOVRE (0x1 << 17) /**< (ADC) General Overrun */
#define AT91C_ADC_ENDRX (0x1 << 18) /**< (ADC) End of Receiver Transfer */
#define AT91C_ADC_RXBUFF (0x1 << 19) /**< (ADC) RXBUFF Interrupt */
/* --- Register ADC_LCDR */
#define AT91C_ADC_LDATA (0x3FF << 0 ) /**< (ADC) Last Data Converted */
/* --- Register ADC_IER */
#define AT91C_ADC_EOC0 (0x1 << 0 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC1 (0x1 << 1 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC2 (0x1 << 2 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC3 (0x1 << 3 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC4 (0x1 << 4 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC5 (0x1 << 5 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC6 (0x1 << 6 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC7 (0x1 << 7 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_OVRE0 (0x1 << 8 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE1 (0x1 << 9 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE2 (0x1 << 10) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE3 (0x1 << 11) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE4 (0x1 << 12) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE5 (0x1 << 13) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE6 (0x1 << 14) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE7 (0x1 << 15) /**< (ADC) Overrun Error */
#define AT91C_ADC_DRDY (0x1 << 16) /**< (ADC) Data Ready */
#define AT91C_ADC_GOVRE (0x1 << 17) /**< (ADC) General Overrun */
#define AT91C_ADC_ENDRX (0x1 << 18) /**< (ADC) End of Receiver Transfer */
#define AT91C_ADC_RXBUFF (0x1 << 19) /**< (ADC) RXBUFF Interrupt */
/* --- Register ADC_IDR */
#define AT91C_ADC_EOC0 (0x1 << 0 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC1 (0x1 << 1 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC2 (0x1 << 2 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC3 (0x1 << 3 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC4 (0x1 << 4 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC5 (0x1 << 5 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC6 (0x1 << 6 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC7 (0x1 << 7 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_OVRE0 (0x1 << 8 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE1 (0x1 << 9 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE2 (0x1 << 10) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE3 (0x1 << 11) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE4 (0x1 << 12) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE5 (0x1 << 13) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE6 (0x1 << 14) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE7 (0x1 << 15) /**< (ADC) Overrun Error */
#define AT91C_ADC_DRDY (0x1 << 16) /**< (ADC) Data Ready */
#define AT91C_ADC_GOVRE (0x1 << 17) /**< (ADC) General Overrun */
#define AT91C_ADC_ENDRX (0x1 << 18) /**< (ADC) End of Receiver Transfer */
#define AT91C_ADC_RXBUFF (0x1 << 19) /**< (ADC) RXBUFF Interrupt */
/* --- Register ADC_IMR */
#define AT91C_ADC_EOC0 (0x1 << 0 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC1 (0x1 << 1 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC2 (0x1 << 2 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC3 (0x1 << 3 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC4 (0x1 << 4 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC5 (0x1 << 5 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC6 (0x1 << 6 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_EOC7 (0x1 << 7 ) /**< (ADC) End of Conversion */
#define AT91C_ADC_OVRE0 (0x1 << 8 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE1 (0x1 << 9 ) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE2 (0x1 << 10) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE3 (0x1 << 11) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE4 (0x1 << 12) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE5 (0x1 << 13) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE6 (0x1 << 14) /**< (ADC) Overrun Error */
#define AT91C_ADC_OVRE7 (0x1 << 15) /**< (ADC) Overrun Error */
#define AT91C_ADC_DRDY (0x1 << 16) /**< (ADC) Data Ready */
#define AT91C_ADC_GOVRE (0x1 << 17) /**< (ADC) General Overrun */
#define AT91C_ADC_ENDRX (0x1 << 18) /**< (ADC) End of Receiver Transfer */
#define AT91C_ADC_RXBUFF (0x1 << 19) /**< (ADC) RXBUFF Interrupt */
/* --- Register ADC_CDR0 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR1 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR2 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR3 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR4 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR5 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR6 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
/* --- Register ADC_CDR7 */
#define AT91C_ADC_DATA (0x3FF << 0 ) /**< (ADC) Converted Data */
#endif /* __AT91SAM7X256_ADC_H */
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -