?? lcd_isr.s48
字號:
; /*********************************************************************
; * SEGGER MICROCONTROLLER SYSTEME GmbH *
; * Solutions for real time microcontroller applications *
; **********************************************************************
; * *
; * (C) 1996 SEGGER Microcontroller Systeme GmbH *
; * *
; * Internet: www.segger.com Support: support@segger.com *
; * *
; **********************************************************************
;
; **** emWin/GSC Grafical user interface for embedded applications ****
; emWin is protected by international copyright laws. Knowledge of the
; source code may not be used to write a similar product. This file may
; only be used in accordance with a license and should not be re-
; distributed in any way. We appreciate your understanding and fairness.
; ----------------------------------------------------------------------
; File : LCD_ISR.s48
; Purpose : Interrupt service routine for 1/4/8-bit LCDs
; ----------------------------------------------------------------------
; Version-Date---Author-Explanation
; ----------------------------------------------------------------------
; 1.00.01 020115 JE a) Support for latch address added
; 1.00 020114 JE a) Now it works...
; 0.50.00 990817 RS Initial version, based on LCD_ISR.s34
; ----------------------------------------------------------------------
; Known problems or limitations with current version:
; DMA-transfer not supported jet (JE)
; ----------------------------------------------------------------------
; Items for future improvement:
; ---------------------------END-OF-HEADER------------------------------
;
NAME lcd_ISR(16)
#include "LCDConf.h"
RSEG CODE(1)
COMMON INTVEC(1)
RSEG UDATA1(1)
#if LCD_CONTROLLER == 0 && defined (LCD_USE_ISR_ASM) && LCD_USE_ISR_ASM
PUBLIC ISRTimerA1
PUBLIC LCD_L0_Off
PUBLIC LCD_L0_On
EXTERN LCD__apVRam:far, LCD__aTimerReload:far
EXTERN LCD__DispOff:far, LCD__BitsPerPixel:far
RSEG CODE
; *********************************************************
; *
; * Config defaults
; *
; *********************************************************
#ifndef LCD_INTERFACEBITS
#define LCD_INTERFACEBITS 4
#endif
#ifndef LCD_USEDMA
#define LCD_USEDMA (0)
#endif
#ifndef LCD_YSIZE
#error Config value missig
#endif
#ifndef LCD_PORT_DATA
#define LCD_PORT_DATA P7
#define LCD_USE_LATCH 0
#else
#define LCD_USE_LATCH 1
#endif
#ifndef LCD_PORT_CTRL
#define LCD_PORT_CTRL P8
#endif
#define MASK_M (1<<0)
#define MASK_FLM (1<<1)
#define MASK_CL1 (1<<2)
#define MASK_DON (1<<3)
#define MASK_CL2 (1<<4)
; *********************************************************
; *
; * Defines for special function registers
; *
; *********************************************************
#define TA1IC 0x00008C
#define TA1 0x000348
#define TA1MR 0x000357
#define TA2 0x00034A
#define TA2MR 0x000358
#define TABSR 0x000340
#define P7 0x0003C1
#define P8 0x0003C4
#define PD7 0x0003C3
#define PD8 0x0003F2
; TBD: DMA-transfer not supported jet!!!
#define DM0SL 0x000378
#define DM0CON 2ch
#define SAR0 20h
#define DAR0 24h
#define TCR0 28h
; *********************************************************
; *
; * Internal macros
; *
; *********************************************************
#if LCD_BITSPERPIXEL ==3
#define LCD_BYTESPERLINE (3*((LCD_VXSIZE)+7)/8)
#else
#define LCD_BYTESPERLINE (((LCD_VXSIZE)+7)/8)
#endif
; *********************************************************
; *
; * Data transfer macros (used in ISR)
; *
; *********************************************************
#if LCD_USEDMA
WRITEDATA2LCD MACRO Off
ENDM
#elif LCD_INTERFACEBITS == 8
#if LCD_USE_LATCH
WRITEDATA2LCD MACRO Off
MOV.W Off[FB], R0
; 1. byte
MOV.B R0L, [A0]
; 2.byte
MOV.B R0H, [A0]
ENDM
#else
WRITEDATA2LCD MACRO Off
MOV.W Off[FB], R0
; 1. byte
mov.b R1H, [A1]
MOV.B R0L, [A0]
mov.b R1L, [A1]
; 2.byte
mov.b R1H, [A1]
MOV.B R0H, [A0]
mov.b R1L, [A1]
ENDM
#endif
#elif LCD_INTERFACEBITS == 4
#if LCD_USE_LATCH
WRITEDATA2LCD MACRO Off
MOV.W Off[FB], R0
; 1. nibble
MOVHL R0L, [A0]
; 2. nibble
MOV.B R0L, [A0]
; 3. nibble
mov.b R0H, R0L
shl.b #-4,R0L
MOV.b R0L, [A0]
; 4. nibble
MOV.B R0H, [A0]
ENDM
#else
WRITEDATA2LCD MACRO Off
MOV.W Off[FB], R0
; 1. nibble
mov.b R1H, [A1]
MOVHL R0L, [A0]
mov.b R1L, [A1]
; 2. nibble
mov.b R1H, [A1]
MOV.B R0L, [A0]
mov.b R1L, [A1]
; 3. nibble
mov.b R0H, R0L
shl.b #-4,R0L
mov.b R1H, [A1]
MOV.b R0L, [A0]
mov.b R1L, [A1]
; 4. nibble
mov.b R1H, [A1]
MOV.B R0H, [A0]
mov.b R1L, [A1]
ENDM
#endif
#elif LCD_INTERFACEBITS == 1
#if LCD_USE_LATCH
WRITEDATA2LCD MACRO Off
MOV.B Off[A0], R0L
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
ENDM
#else
WRITEDATA2LCD MACRO Off
MOV.B Off[A0], R0L
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
mov.b R1H, [A1]
rot.b #1,R0L
MOV.B R0L, LCD_PORT_DATA
mov.b R1L, [A1]
ENDM
#endif
#endif
; *********************************************************
; *
; * ISR
; *
; *********************************************************
Public ISRTimerA1
ISRTimerA1:
FSET B
pushm FB ; not needed with IAR
; *** Output next line / first line signals
mov.w #LCD_PORT_CTRL, A1
CMP.W #LCD_YSIZE,Line
JNE ISR_NextLine
inc.B FrameCnt
OR.B #MASK_FLM, [A1]
OR.B #MASK_CL1, [A1]
AND.B #~MASK_CL1,[A1]
AND.B #~MASK_FLM,[A1]
JMP.B NLDone
ISR_NextLine:
OR.B #MASK_CL1, [A1]
AND.B #~MASK_CL1, [A1]
NLDone:
; *** Check if M has to be inverted
DEC.B MCnt
JNE M_Done
MOV.B #7,MCnt
XOR.B #MASK_M, [A1]
M_Done:
;
; Start processing the new line
;
; *** Last line ? if (++Line==LCD_YSIZE) {
ADD.W #-1,Line
JPZ ManageDone
MOV.W #LCD_YSIZE,Line
; *** Handle GrayCnt
mov.b GrayCnt, R0L
dec.b R0L
mov.b R0L, GrayCnt
jpz GrayCntDone
mov.b LCD__BitsPerPixel, R0L
dec.b R0L
mov.b R0L, GrayCnt
GrayCntDone:
ADD.B R0L, R0L ; *2 for U16 array
MOV.B R0L, A0
MOV.W LCD__aTimerReload[A0], A1
MOV.W A1,TA1
ADD.B R0L, R0L ; *4 for far pointer array
MOV.B R0L, A0
MOV.W LCD__apVRam[A0], A1
MOV.W A1, pData
MOV.W 2+LCD__apVRam[A0], A1
MOV.W A1, pData+2
ManageDone:
#if LCD_USEDMA
; *** Program DMA Destination: 8-bit latch
mov.w pData, SAR0
mov.b pData+2, SAR0+2
mov.b #19h, DM0CON ; 8 bits, source increments
mov.w #LCD_BYTESPERLINE, TCR0
#else
#if LCD_USE_LATCH
mov.l #LCD_PORT_DATA, A0
#else
mov.w #LCD_PORT_DATA, A0
#endif
mov.w #LCD_PORT_CTRL, A1
mov.b [A1], R1L
mov.b R1L, R1H
or.b #MASK_CL2, R1H
and.b #255-MASK_CL2, R1L
ldc pData, FB
#endif
WRITEDATA2LCD 0
#if LCD_BYTESPERLINE > 2
WRITEDATA2LCD 2
#endif
#if LCD_BYTESPERLINE > 4
WRITEDATA2LCD 4
#endif
#if LCD_BYTESPERLINE > 6
WRITEDATA2LCD 6
#endif
#if LCD_BYTESPERLINE > 8
WRITEDATA2LCD 8
#endif
#if LCD_BYTESPERLINE > 10
WRITEDATA2LCD 10
#endif
#if LCD_BYTESPERLINE > 12
WRITEDATA2LCD 12
#endif
#if LCD_BYTESPERLINE > 14
WRITEDATA2LCD 14
#endif
#if LCD_BYTESPERLINE > 16
WRITEDATA2LCD 16
#endif
#if LCD_BYTESPERLINE > 18
WRITEDATA2LCD 18
#endif
#if LCD_BYTESPERLINE > 20
WRITEDATA2LCD 20
#endif
#if LCD_BYTESPERLINE > 22
WRITEDATA2LCD 22
#endif
#if LCD_BYTESPERLINE > 24
WRITEDATA2LCD 24
#endif
#if LCD_BYTESPERLINE > 26
WRITEDATA2LCD 26
#endif
#if LCD_BYTESPERLINE > 28
WRITEDATA2LCD 28
#endif
#if LCD_BYTESPERLINE > 30
WRITEDATA2LCD 30
#endif
#if LCD_BYTESPERLINE > 32
WRITEDATA2LCD 32
#endif
#if LCD_BYTESPERLINE > 34
WRITEDATA2LCD 34
#endif
#if LCD_BYTESPERLINE > 36
WRITEDATA2LCD 36
#endif
#if LCD_BYTESPERLINE > 38
WRITEDATA2LCD 38
#endif
#if LCD_BYTESPERLINE > 40
WRITEDATA2LCD 40
#endif
#if LCD_BYTESPERLINE > 42
WRITEDATA2LCD 42
#endif
#if LCD_BYTESPERLINE > 44
WRITEDATA2LCD 44
#endif
#if LCD_BYTESPERLINE > 46
WRITEDATA2LCD 46
#endif
#if LCD_BYTESPERLINE > 48
WRITEDATA2LCD 48
#endif
#if LCD_BYTESPERLINE > 50
WRITEDATA2LCD 50
#endif
#if LCD_BYTESPERLINE > 52
WRITEDATA2LCD 52
#endif
#if LCD_BYTESPERLINE > 54
WRITEDATA2LCD 54
#endif
#if LCD_BYTESPERLINE > 56
WRITEDATA2LCD 56
#endif
#if LCD_BYTESPERLINE > 58
WRITEDATA2LCD 58
#endif
#if LCD_BYTESPERLINE > 60
WRITEDATA2LCD 60
#endif
#if LCD_BYTESPERLINE > 62
WRITEDATA2LCD 62
#endif
#if LCD_BYTESPERLINE > 64
WRITEDATA2LCD 64
#endif
#if LCD_BYTESPERLINE > 66
WRITEDATA2LCD 66
#endif
#if LCD_BYTESPERLINE > 68
WRITEDATA2LCD 68
#endif
#if LCD_BYTESPERLINE > 70
WRITEDATA2LCD 70
#endif
#if LCD_BYTESPERLINE > 72
WRITEDATA2LCD 72
#endif
#if LCD_BYTESPERLINE > 74
WRITEDATA2LCD 74
#endif
#if LCD_BYTESPERLINE > 76
WRITEDATA2LCD 76
#endif
#if LCD_BYTESPERLINE > 78
WRITEDATA2LCD 78
#endif
#if LCD_BYTESPERLINE > 80
WRITEDATA2LCD 80
#endif
#if LCD_BYTESPERLINE > 82
WRITEDATA2LCD 82
#endif
#if LCD_BYTESPERLINE > 84
WRITEDATA2LCD 84
#endif
#if LCD_BYTESPERLINE > 86
WRITEDATA2LCD 86
#endif
#if LCD_BYTESPERLINE > 88
WRITEDATA2LCD 88
#endif
#if LCD_BYTESPERLINE > 90
WRITEDATA2LCD 90
#endif
#if LCD_BYTESPERLINE > 92
WRITEDATA2LCD 92
#endif
#if LCD_BYTESPERLINE > 94
WRITEDATA2LCD 94
#endif
#if LCD_BYTESPERLINE > 96
WRITEDATA2LCD 96
#endif
#if LCD_BYTESPERLINE > 98
WRITEDATA2LCD 98
#endif
#if LCD_BYTESPERLINE > 100
WRITEDATA2LCD 100
#endif
#if LCD_BYTESPERLINE > 102
WRITEDATA2LCD 102
#endif
#if LCD_BYTESPERLINE > 104
WRITEDATA2LCD 104
#endif
#if LCD_BYTESPERLINE > 106
WRITEDATA2LCD 106
#endif
#if LCD_BYTESPERLINE > 108
WRITEDATA2LCD 108
#endif
#if LCD_BYTESPERLINE > 110
WRITEDATA2LCD 110
#endif
#if LCD_BYTESPERLINE > 112
WRITEDATA2LCD 112
#endif
#if LCD_BYTESPERLINE > 114
WRITEDATA2LCD 114
#endif
#if LCD_BYTESPERLINE > 116
WRITEDATA2LCD 116
#endif
#if LCD_BYTESPERLINE > 118
WRITEDATA2LCD 118
#endif
ADD.W #LCD_BYTESPERLINE,pData
popm FB ; this instruction is not needed with IAR since FB is not used
REIT
; *********************************************************
; *
; * LCD_L0_On
; *
; *********************************************************
LCD_L0_On:
PUSHM R0
MOV.B #0ffh, PD7
MOV.B #0ffh, PD8
MOV.W LCD__apVRam,R0
MOV.W R0,pData
MOV.W 2+LCD__apVRam,R0
MOV.W R0,pData+2
MOV.W LCD__aTimerReload, R0
; *** Line refresh: TA1
MOV.W R0,TA1
MOV.B #0,TA1MR ; Timer mode register
MOV.B #7,TA1IC ; Timer interrupt register, high prio
#if LCD_USEDMA
; *** Program DMA Destination: 8-bit latch
mov.w #lwrd(LCD_DMADEST), DAR0
mov.b #byte3(LCD_DMADEST), DAR0+2
mov.b #4, DM0SL ; USE Timer A2 as trigger
mov.b #19h, DM0CON ; 8 bits, source increments
; *** Shift timer: TA2
MOV.W #6,TA2
MOV.B #0,TA2MR ; Timer mode register
or.B #(1<<2),TABSR
#endif
or.B #(1<<1),TABSR
BSET 3, P8
POPM R0
RTS
; *********************************************************
; *
; * LCD_L0_Off
; *
; *********************************************************
LCD_L0_Off:
AND.B #253, TABSR ; Start timer : TABSR &= ~(1<<1)
BCLR 3, P8 ; DON = 0;
RTS
COMMON INTVEC
.BLKB 52
.LWORD ISRTimerA1
RSEG UDATA0
Line:
.BLKB 2
FrameCnt:
.BLKB 1
GrayCnt:
.BLKB 1
IntCnt:
.BLKB 1
MCnt:
.BLKB 1
.BLKB 1
pData:
.BLKB 4
#endif /* LCD_CONTROLLER == 0 */
END
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -