/******************************************************************//* regs.h V0.00                                                   *//* Copyright (c) Texas Instruments , Incorporated  2000           *//******************************************************************//******************************************************************//* DEFINE ALL PERIPHERAL MEMORY MAPPED REGISTER ADRESSES          *//******************************************************************//******************************************************************//* Check to see if mmregs.h has been previously included by       *//* another header, if so, skip this and go on                     *//******************************************************************/#if !defined(__MMREGS)#include <limits.h>/******************************************************************//* Target specific data and macros                                *//*                                                                *//* MASK_TARGET_WORD - bit pattern to mask all bits in a target    *//*                    word                                        *//* WORD_SIZE        - size in bits of target word                 *//* BASE_ADDR        - base address of memory-mapped peripheral    *//*                    control registers                           *//******************************************************************/#define MASK_TARGET_WORD	0xffff#define TARGET_WRD_SZ	CHAR_BIT	#define BYTES_PER_WORD  TARGET_WRD_SZ/8#define WORD_SIZE	(CHAR_BIT * sizeof(unsigned int))#define SP_ADDR(port)		(0x22 + (0x10 * port))#define DRR_ADDR(port)          (0x20 + (0x10 * port))#define DXR_ADDR(port)          (0x21 + (0x10 * port))#define BSP_ADDR(port)		(0x22 + (0x20 * port))#define BDRR_ADDR(port)         (0x20 + (0x20 * port))#define BDXR_ADDR(port)         (0x21 + (0x20 * port))#define BSPCE_ADDR(port)        (0x23 + (0x20 * port))#define AXR_ADDR(port)          (0x38 + (0x04 * port))#define ARR_ADDR(port)          (0x3a + (0x04 * port))#define TDM_ADDR		TSPC#define TIMER_ADDR		TCR_ADDR/*----------------------------------------------------------------------------*//* MACRO FUNCTIONS                                                            *//*----------------------------------------------------------------------------*//******************************************************************//* Define data structures for all memory mapped registers         *//******************************************************************//*----------------------------------------------------------------*//* Define bit fields for Serial Port Control Registers            *//*----------------------------------------------------------------*/#define RSRFULL		13#define RSRFULL_SZ	 1#define XSREMPTY	12#define XSREMPTY_SZ	 1#define IN1		 9#define IN1_SZ		 1#define IN0		 8#define IN0_SZ		 1#define TXM		 5#define TXM_SZ		 1#define MCM		 4#define MCM_SZ		 1#define FSM		 3#define FSM_SZ		 1#define FO		 2#define FO_SZ		 1#define TDM		 0#define TDM_SZ		 1#define CLKDV		 0#define CLKDV_SZ	 5#define FSP		 5#define FSP_SZ		 1#define CLKP		 6#define CLKP_SZ		 1#define FE		 7#define FE_SZ		 1#define FIG		 8#define FIG_SZ		 1#define PCM		 9#define PCM_SZ		 1#define BXE		10#define BXE_SZ		 1#define XH		11#define XH_SZ		 1#define HALTX		12#define HALTX_SZ	 1#define BRE		13#define BRE_SZ		 1#define RH		14#define RH_SZ		 1#define HALTR		15#define HALTR_SZ	 1/******************************************************************//* Define Timer Period, and Control Registers with all related    *//* data structures, macros, and functions                         *//*----------------------------------------------------------------*/#define PSC		 6#define PSC_SZ		 4#define TRB		 5#define TRB_SZ		 1#define TSS		 4#define TSS_SZ		 1#define TDDR		 0#define TDDR_SZ		 4/*---------------------------------------------------------------*//* Data structures, macros for Clock Mode Register               *//*---------------------------------------------------------------*/#define PLLMUL		12#define PLLMUL_SZ	 4#define PLLDIV		11#define PLLDIV_SZ	 1#define PLLCOUNT	 3#define PLLCOUNT_SZ	 8#define PLLON_OFF	 2#define PLLON_OFF_SZ	 1#define PLLNDIV		 1#define PLLNDIV_SZ	 1#define PLLSTATUS	 0#define PLLSTATUS_SZ	 1/******************************************************************//* Define bit fields for Software Wait State Register             *//******************************************************************/#define IO		12#define IO_SZ		 3#define DATA_HI		 9#define DATA_HI_SZ	 3#define DATA_LO		 6#define DATA_LO_SZ	 3#define PROGRAM_HI	 3#define PROGRAM_HI_SZ	 3#define PROGRAM_LO	 0#define PROGRAM_LO_SZ	 3/*-------------------------------------------------------------------*//* Define structure for Bank Switch Control Register                 *//*-------------------------------------------------------------------*/#define BNKCMP		12#define BNKCMP_SZ	 4#define PSDS		11#define PSDS_SZ		 1#define BH		 1#define BH_SZ		 1#define EXIO		 0#define EXIO_SZ		 1#define INT0		 0#define INT1		 1#define INT2		 2#define TINT		 3#define RINT0		 4#define XINT0		 5#define RINT2		 6#define XINT2		 7#define INT3		 8#define HPINT		 9#define RINT1		10#define XINT1		11

#define DMAC0		6
#define DMAC1		7
#define DMAC2		10
#define DMAC3		11
#define DMAC4		12
#define DMAC5		13
/***************************************************************//* DEFINE DATA STRUCTURE FOR HOST PORT INTERFACE CONTROL REG   *//***************************************************************/#define BOB			 0#define SMOD		 1#define DSPINT		 2#define HINT		 3/******************************************************************//* Serial Port 0 defined for C541 only                            *//******************************************************************/#define DRR0	*(volatile unsigned int *)0x20#define DRR0_ADDR	0x20#define DXR0	*(volatile unsigned int *)0x21#define DXR0_ADDR	0x21#define SPC0 	*(volatile unsigned int *)0x22#define SPC0_ADDR	0x22/******************************************************************//* Buffered Serial Port 0 defined for all devices except C541     *//******************************************************************/#define BSPC0	*(volatile unsigned int *)0x22#define BSPC0_ADDR	0x22#define BSPCE0	*(volatile unsigned int *)0x23#define BSPCE0_ADDR	0x23#define BDRR0	*(volatile unsigned int *)0x20#define BDRR0_ADDR	0x20#define BDXR0	*(volatile unsigned int *)0x21#define BDXR0_ADDR	0x21/*********************************************************************//* Defined flags for use in setting control for HPI host interface   *//* control pins                                                      *//* The value of these constants is their relative bit position in    *//* the control structure for the host side of the HPI interface      *//*********************************************************************/#define HAS_PIN		0#define HBIL_PIN	1#define HCNTL0_PIN	2#define HCNTL1_PIN	3#define HCS_PIN		4#define HD0_PIN		5#define HDS1_PIN	6#define HDS2_PIN	7#define HINT_PIN	8#define HRDY_PIN	9#define HRW_PIN		10/*********************************************************************//* AUTOBUFFERING UNIT (Buffered Serial Port 0)                       *//* Defined for all except C541                                       *//*********************************************************************/#define AXR0	*(volatile unsigned int *)0x38#define AXR0_ADDR	0x38#define BKX0	*(volatile unsigned int *)0x39#define BKX0_ADDR	0x39#define ARR0	*(volatile unsigned int *)0x3a#define ARR0_ADDR	0x3a#define BKR0	*(volatile unsigned int *)0x3b#define BKR0_ADDR	0x3b/*********************************************************************//* AUTOBUFFERING UNIT (Buffered Serial Port 1)                       *//* Defined for C548 Only!!!!!!                                       *//*********************************************************************/#define AXR1	*(volatile unsigned int *)0x3c#define AXR1_ADDR	0x3c#define BKX1	*(volatile unsigned int *)0x3d#define BKX1_ADDR	0x3d#define ARR1	*(volatile unsigned int *)0x3e#define ARR1_ADDR	0x3e#define BKR1	*(volatile unsigned int *)0x3f#define BKR1_ADDR	0x3f/*********************************************************************//* Buffered Serial Port 1 defined only for C548                      *//*********************************************************************/#define BSPC1	*(volatile unsigned int *)0x42#define BSPC1_ADDR	0x42#define BSPCE1	*(volatile unsigned int *)0x43#define BSPCE1_ADDR	0x43#define BDRR1	*(volatile unsigned int *)0x40#define BDDR1_ADDR	0x40#define BDXR1	*(volatile unsigned int *)0x41#define BDXR1_ADDR	0x41#define __MMREGS#endif