SkyEye TAP --- A kernel driver for SkyEye's net simulation on BeOSCopyright (C) 2007 Anthony Lee <don.anthony.lee+program@gmail.com>This program is free software; you can redistribute it and/or modifyit under the terms of the GNU General Public License as published bythe Free Software Foundation; either version 2 of the License, or(at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See theGNU General Public License for more details.You should have received a copy of the GNU General Public Licensealong with this program; if not, write to the Free SoftwareFoundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA Compile & Install the driver============================ - Run the command "make install" within this directory to compile and install the driver. - Restart the network, then you'll get "/dev/net/skyeye_tap/0" on your system.Special on BeOS R5.0.x====================== - You should get an addon for net_server, see below. - On BeOS R5.0.x, there are no "ifconfig", so you must manually set the IP address   and net mask to be the correct value, for example: 10.0.0.1/255.255.255.0How to compile the addon for net_server on BeOS R5.0.x ====================================================== - First you must download "Be Sample Code" from http://www.bebits.com/app/3019. - Then replace the lines like below in "sample-code/drivers/EtherPCI/Addon/ne2000pci.cpp"		static const char TITLE[] = "Novell NE2000 compatible adapter (PCI) Sample";		static const char CONFIG[] = "ne2000pci";		static const char LINK[] = "/dev/net/etherpci";   with		static const char TITLE[] = "SkyEye TAP Driver";		static const char CONFIG[] = "skyeye_tap";		static const char LINK[] = "/dev/net/skyeye_tap"; - Third, compile the project and rename the target's name("ne2000pci") to be "skyeye_tap". - At last, copy or move "skyeye_tap" that you renamed to "/boot/beos/system/add-ons/net_server/skyeye_tap" - Restart the net server and fit the IP/mask to be correct.How to write application like what I did with tuntap driver on Linux==================================================================== - Please remember that the codes isn't comed from Linux, so there are diffrent. - See "device/net/skyeye_net_tap_beos.c" to find out how to write it.