/****************************************Copyright (c)**************************************************
**                               Guangzhou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			sddriver.c
** Last modified Date:	2005-1-6
** Last Version:		V1.0
** Descriptions:		sd 卡驅動軟件包: SD卡物理層 用戶API函數
**						Soft Packet of SD Card Driver: user API funciton
**
**------------------------------------------------------------------------------------------------------
** Created by:			Ming Yuan Zheng
** Created date:		2005-1-6
** Version:				V1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			
** Modified date:		
** Version:				
** Descriptions:		
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#include "config.h"
#include "sdconfig.h"
#include "sdhal.h"
#include "SDCmd.h"
#include "sddriver.h"

/* SD卡信息結構體變量 the information structure variable of SD Card */
sd_struct sds;			

/* 超時時間單位表(單位:0.000000001ns) timeout unit table */
const INT32U time_unit[8] = {1000000000,100000000,10000000,
							 1000000,100000,10000,1000,100};

/* 超時時間表 timeout value table */							 
const INT8U time_value[16] = {0,10,12,13,15,20,25,30,
                              35,40,45,50,55,60,70,80};
 
/* 超時時間因數表 timeout factor table */                              
const INT8U r2w_fator[6] = {1,2,4,8,16,32};                           
    
	/*       
	***************************************************************************************************
		
	     用戶API函數:  初始化,讀,寫,擦 SD卡  User API Function: Initialize,read,write,erase SD Card 
				
	***************************************************************************************************
	*/

				
/*******************************************************************************************************************
** 函數名稱: INT8U SD_Initialize()				Name:	  INT8U SD_Initialize()
** 功能描述: 初始化SD卡							Function: initialize sd card
** 輸　  入: 無									Input:	  NULL
** 輸 　 出: 0:   正確    >0:   錯誤碼		  	Output:	  0:  right		>0:  error code
********************************************************************************************************************/
INT8U SD_Initialize(void)
{
	INT8U recbuf[4],ret;
    
    SD_HardWareInit();					    		/* 初始化讀寫SD卡的硬件條件 Initialize the hardware that access SD Card */
    
    if (SD_ChkCard() != 1)							/* 檢查卡是否插入 check weather card is inserted */
    	return SD_ERR_NO_CARD;   
         
    SPI_CS_Assert();								/* 1. 置CS為低 assert CS */  
	SD_SPIDelay(25);								/* 2. 至少延時 74 clock delay more than 74 clock */
    SPI_CS_Deassert();								/* 3. 置CS為高 dessert CS */
    SD_SPIDelay(2);									/* 4. 延時2(8 clock) delay 2(8 clock) */
    
    ret = SD_ResetSD();								/* 5. 發出CMDO命令復位SD卡 send CMD0 command to reset sd card */
    if (ret != SD_NO_ERR)
        return ret;									
 	
 	ret = SD_ActiveInit();							/* 6. 激活卡進入初始化過程. active card initialize process */
 	if (ret != SD_NO_ERR)
 		return ret;
        
   	ret = SD_ReadOCR(4, recbuf);  					/* 7. 讀OCR寄存器,查詢卡支持的電壓值 read OCR register,get the supported voltage */
    if (ret != SD_NO_ERR)
        return ret;
    
    if ((recbuf[1] & MSK_OCR_33) != MSK_OCR_33)
        return SD_ERR_VOL_NOTSUSP;					/* 不支持3.3V,返回錯誤碼  not support 3.3V,return error code */
    
    SPI_ClkToMax();									/* 8. 設置SPI時鐘到最大值 set SPI clock to maximum */
        
#if SD_CRC_EN        
    ret = SD_EnableCRC(1);							/* 使能CRC校驗 enable CRC check */
	if (ret != SD_NO_ERR)  
	  	return ret;
#endif

    ret = SD_SetBlockLen(SD_BLOCKSIZE);				/* 9. 設置塊的長度: 512Bytes Set the block length: 512Bytes */
    if (ret != SD_NO_ERR)  
        return ret;
        
	return (SD_GetCardInfo());						/* 10. 讀CSD寄存器,獲取SD卡信息 read CSD register, get the information of SD card */
}

/********************************************************************************************************************
** 函數名稱: INT8U SD_ReadBlock()					Name:	  INT8U SD_ReadBlock()
** 功能描述: 從SD卡中讀一個塊						Function: read a single block from sd card
** 輸　  入: INT32U blockaddr: 塊地址				Input:    INT32U blockaddr: address of block
			 INT8U *recbuf   : 接收緩沖區,長度512Bytes	 	  INT8U *recbuf   : the buffer of receive,length is 512Bytes
** 輸 　 出: 0:   正確    >0:   錯誤碼		  		Output:	  0:  right		>0:  error code
*********************************************************************************************************************/
INT8U SD_ReadBlock(INT32U blockaddr, INT8U *recbuf)
{
	INT8U ret; 
	
	if (blockaddr > sds.block_num)	
		return SD_ERR_OVER_CARDRANGE;				/* 操作超出卡容量范圍 operate over the card range */
	
 	ret = SD_ReadSingleBlock(blockaddr);			/* 讀單塊命令 read single blocks command */						
 	if (ret != SD_NO_ERR)
 		return ret;
 	
  	return (SD_ReadBlockData(SD_BLOCKSIZE, recbuf));/* 讀出數據 read data from sd card */	
}

/********************************************************************************************************************
** 函數名稱: INT8U SD_ReadMultiBlock()				Name:	  INT8U SD_ReadMultiBlock()
** 功能描述: 從SD卡中讀多個塊						Function: read multi blocks from sd card
** 輸　  入: INT32U blockaddr: 塊地址				Input:	  INT32U blockaddr: address of block
			 INT32U blocknum : 塊數量						  INT32U blocknum : the numbers of block
			 INT8U *recbuf   : 接收緩沖區,每塊512字節		  INT8U *recbuf   : the buffer of receive,each block length is 512Bytes
** 輸 　 出: 0:   正確    >0:   錯誤碼		  		Output:	  0:  right		>0:  error code
*********************************************************************************************************************/
#if SD_ReadMultiBlock_EN
INT8U SD_ReadMultiBlock(INT32U blockaddr, INT32U blocknum, INT8U *recbuf)
{
    INT32U i;
    INT8U ret;
    
    if ((blockaddr + blocknum) > sds.block_num)	
		return SD_ERR_OVER_CARDRANGE;				/* 操作超出卡容量范圍 operate over the card range */
    
	ret = SD_ReadMultipleBlock(blockaddr);			/* 讀多塊命令 read multiple blocks command */
	if (ret != SD_NO_ERR)
		return ret;
    
    for (i = 0; i < blocknum; i++)
    {												/* 讀出數據 read data from sd card */
    	ret = SD_ReadBlockData(SD_BLOCKSIZE, recbuf);
    	if (ret == SD_NO_ERR)
       		recbuf = recbuf + SD_BLOCKSIZE;
    	else
    		return ret;
    }
 	 
 	return (SD_StopTransmission());				    /* 結束數據傳輸 stop transmission operation */
}

#endif

/********************************************************************************************************************
** 函數名稱: INT8U SD_WriteBlock()					Name:	  INT8U SD_WriteBlock()
** 功能描述: 向SD卡中寫入一個塊						Function: write a block to sd card
** 輸　  入: INT32U blockaddr: 塊地址				Input: 	  INT32U blockaddr: address of block
			 INT8U *sendbuf  : 發送緩沖區,長度512Bytes	  	  INT8U *sendbuf  : the buffer of send,length is 512Bytes
** 輸 　 出: 0:   正確    >0:   錯誤碼		  		Output:	  0:  right		>0:  error code
*********************************************************************************************************************/
INT8U SD_WriteBlock(INT32U blockaddr, INT8U *sendbuf)
{
	INT8U ret,tmp[2];
	
	if (blockaddr > sds.block_num)	
		return SD_ERR_OVER_CARDRANGE;							/* 操作超出卡容量范圍 operate over the card range */
	
	if (SD_ChkCardWP() == 1)
		return SD_ERR_WRITE_PROTECT;							/* 卡有寫保護 */
	
	ret = SD_WriteSingleBlock(blockaddr);						/* 寫單塊命令 write single block */
	if (ret != SD_NO_ERR)	
		return ret;
	
	ret = SD_WriteBlockData(0, SD_BLOCKSIZE, sendbuf);			/* 寫入數據 write data */
 	if (ret == SD_NO_ERR)										/* 讀Card Status寄存器, 檢查寫入是否成功 */
 	{															/* read Card Status register to check write wheather sucessfully */
 		ret = SD_ReadCard_Status(2,tmp);
 		if (ret != SD_NO_ERR)
 			return ret;											/* 讀寄存器失敗 read register fail */

 		if((tmp[0] != 0) || (tmp[1] != 0))
			ret = SD_ERR_WRITE_BLK; 			     			/* 響應指示寫失敗 response indicate write fail */
 	}
  
 	return ret;													/* 返回寫入結果 return the result of writing */									
}

/**********************************************************************************************************************
** 函數名稱: INT8U SD_WriteMultiBlock()				Name:	  INT8U SD_WriteMultiBlock()
** 功能描述: 向SD卡中寫入多個塊						Function: write multi blocks to sd card
** 輸　  入: INT32U blockaddr: 塊地址				Input:	  INT32U blockaddr: address of block
			 INT32U blocknum : 塊數量						  INT32U blocknum : the numbers of block
			 INT8U *sendbuf  : 發送緩沖區每塊512字節    	  INT8U *sendbuf  : the send buffer,each block length is 512Bytes
** 輸 　 出: 0:   正確    >0:   錯誤碼		  		Output:	  0:  right		>0:  error code
***********************************************************************************************************************/
#if SD_WriteMultiBlock_EN
INT8U SD_WriteMultiBlock(INT32U blockaddr, INT32U blocknum, INT8U *sendbuf)
{
	INT32U i;
	INT8U ret;
	
	if ((blockaddr + blocknum) > sds.block_num)	
		return SD_ERR_OVER_CARDRANGE;							/* 操作超出卡容量范圍 operate over the card range */
		
	if (SD_ChkCardWP() == 1)
		return SD_ERR_WRITE_PROTECT;							/* 卡有寫保護 */
	
	ret = SD_WriteMultipleBlock(blockaddr);						/* 寫多塊命令 write multiple blocks command */
	if (ret != SD_NO_ERR)