//******************************************************************************
//   MSP430x42x0 Demo - FLL+, Runs Internal DCO at 2.45MHz
//
//  Description: This program demonstrates setting the internal DCO to run at
//  2.45MHz with auto-calibration by the FLL+ circuitry.
//  ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = DCO = (74+1) x ACLK = 2457600Hz
//  //* An external watch crystal between XIN & XOUT is required for ACLK *//	
//
//                 MSP430F4270
//             -----------------
//         /|\|              XIN|-
//          | |                 | 32kHz
//          --|RST          XOUT|-
//            |                 |
//            |        P1.1/MCLK|--> MCLK = 2.45Mhz
//            |                 |
//            |        P1.5/ACLK|--> ACLK = 32kHz
//            |                 |
//
//  L. Westlund / S. Karthikeyan
//  Texas Instruments Inc.
//  June 2005
//  Built with IAR Embedded Workbench Version: 3.30A
//*****************************************************************************
#include  <msp430x42x0.h>

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop watchdog timer
  SCFI0 |= FN_2;                            // Set DCO operating range
  FLL_CTL0 |= XCAP14PF;                     // Set load capacitance for xtal
  SCFQCTL = 74;                             // (74+1) x 32768 = 2.45Mhz

  P1DIR = 0x22;                             // P1.1,5 to output direction
  P1SEL = 0x22;                             // P1.1,5 to output MCLK & ACLK

  while(1);                                 // Loop in place
}