//*----------------------------------------------------------------------------
//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
//*----------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*----------------------------------------------------------------------------
//* File Name           : descriptor.c
//* Object              : USB monitor aplication.
//*
//* 1.0 Jul 31 2002 	: ODi Creation
//*----------------------------------------------------------------------------
#include "AT91_SVC_USBCTL.h"
#include "lib_AT91RM9200.h"
#include "AT91_SVC_USBIN.h"

AT91S_SVC_USBIN    usbEp3;

/* ================================================================ */
/* ===================== Device configuration ===================== */
/* ================================================================ */
// This is the current configuration.
unsigned char currentConfiguration = 0;
unsigned char currentConnection = 0;

const char deviceDescriptor[] = {
	/* Device descriptor */
	0x12,   // bLength
	0x01,   // bDescriptorType
	0x10,   // bcdUSBL
	0x01,   //
	0x02,   // bDeviceClass:    CDC class code
	0x00,   // bDeviceSubclass: CDC class sub code
	0x00,   // bDeviceProtocol: CDC Device protocol
	0x08,   // bMaxPacketSize0
	0xEB,   // idVendorL
	0x03,   //
	0x22,   // idProductL
	0x61,   //
	0x10,   // bcdDeviceL
	0x01,   //
	0x00,   // iManufacturer    // 0x01
	0x00,   // iProduct
	0x00,   // SerialNumber
	0x01    // bNumConfigs
};

const char configurationDescriptor[] = {
	/* ============== CONFIGURATION 1 =========== */
	/* Configuration 1 descriptor */
	0x09,   // CbLength
	0x02,   // CbDescriptorType
	0x20,   // CwTotalLength 2 EP + Control
	0x00,
	0x01,   // CbNumInterfaces
	0x01,   // CbConfigurationValue
	0x00,   // CiConfiguration
	0xC0,   // CbmAttributes 0xA0
	0x00,   // CMaxPower

	/* Data Class Interface Descriptor Requirement */
	0x09, // bLength
	0x04, // bDescriptorType
	0x00, // bInterfaceNumber
	0x00, // bAlternateSetting
	0x02, // bNumEndpoints
	0x00, // bInterfaceClass
	0x00, // bInterfaceSubclass
	0x00, // bInterfaceProtocol
	0x00, // iInterface

	/* First alternate setting */
	/* Endpoint 1 descriptor */
	0x07,   // bLength
	0x05,   // bDescriptorType
	0x01,   // bEndpointAddress, Endpoint 01 - OUT
	0x02,   // bmAttributes      BULK
	0x40,   // wMaxPacketSize
	0x00,
	0x00,   // bInterval

	/* Endpoint 2 descriptor */
	0x07,   // bLength
	0x05,   // bDescriptorType
	0x82,   // bEndpointAddress, Endpoint 02 - IN
	0x02,   // bmAttributes      BULK
	0x40,   // wMaxPacketSize
	0x00,
	0x00    // bInterval
};


/* USB standard request code */
#define STD_GET_STATUS_ZERO           0x0080 
#define STD_GET_STATUS_INTERFACE      0x0081
#define STD_GET_STATUS_ENDPOINT       0x0082

#define STD_CLEAR_FEATURE_ZERO        0x0100
#define STD_CLEAR_FEATURE_INTERFACE   0x0101
#define STD_CLEAR_FEATURE_ENDPOINT    0x0102

#define STD_SET_FEATURE_ZERO          0x0300
#define STD_SET_FEATURE_INTERFACE     0x0301
#define STD_SET_FEATURE_ENDPOINT      0x0302

#define STD_SET_ADDRESS               0x0500
#define STD_GET_DESCRIPTOR            0x0680
#define STD_SET_DESCRIPTOR            0x0700
#define STD_GET_CONFIGURATION         0x0880
#define STD_SET_CONFIGURATION         0x0900
#define STD_GET_INTERFACE             0x0A81
#define STD_SET_INTERFACE             0x0B01
#define STD_SYNCH_FRAME               0x0C82

/* CDC Class Specific Request Code */
#define GET_LINE_CODING               0x21A1
#define SET_LINE_CODING               0x2021
#define SET_CONTROL_LINE_STATE        0x2221

//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_GetDescriptorDevice
//* \brief Answer to a standard GET DESCRIPTOR request
//*----------------------------------------------------------------------------
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
__inline void AT91F_USB_GetDescriptorDevice(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	unsigned short wLength = *((unsigned short *) &(pUSBCTL->pSetup[6]));
	pUSBCTL->Write(pUSBCTL,
		deviceDescriptor,
		MIN(sizeof(deviceDescriptor), wLength),
		(AT91PF_SVC_USBCTL_RWComplete) 0);    // No callback
}

//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_GetDescriptorConfiguration
//* \brief Answer to a standard GET DESCRIPTOR request
//*----------------------------------------------------------------------------
__inline void AT91F_USB_GetDescriptorConfiguration(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	unsigned short wLength = *((unsigned short *) &(pUSBCTL->pSetup[6]));
	pUSBCTL->Write(pUSBCTL,
		configurationDescriptor,
		MIN(sizeof(configurationDescriptor), wLength),
		(AT91PF_SVC_USBCTL_RWComplete) 0);    // No callback
}

//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_SetAddress
//* \brief Answer to a standard SET ADDRESS request
//*----------------------------------------------------------------------------
void AT91F_USB_SetAddressComplete(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	unsigned char address = pUSBCTL->pSetup[2];

	// Set Address
	AT91F_UDP_SetAddress(pUSBCTL->pUdp, address);
	if (address)
		// Move the UDP function to the addressed state
		AT91F_UDP_SetState(pUSBCTL->pUdp, AT91C_UDP_FADDEN);
	else
		// Move the UDP function to the default state
		AT91F_UDP_SetState(pUSBCTL->pUdp, 0);
}

__inline void AT91F_USB_SetAddress(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	// UDP address change must be done once STATUS IN is achieved
	pUSBCTL->Write(pUSBCTL,	(char *) 0,	0, AT91F_USB_SetAddressComplete);
}


//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_SetConfiguration
//* \brief Answer to a standard SET CONFIGURATION request
//*----------------------------------------------------------------------------
void AT91F_USB_SetConfigurationComplete(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	AT91PS_UDP   pUdp = pUSBCTL->pUdp; // Pointer to UDP registers

	// Move the UDP function to the configured state
	AT91F_UDP_SetState(pUdp, AT91C_UDP_CONFG);

	// Enable endpoints
	AT91F_UDP_EpSet(pUdp, 1, AT91C_UDP_EPEDS);
	AT91F_UDP_EpSet(pUdp, 2, AT91C_UDP_EPEDS);
	AT91F_UDP_EpSet(pUdp, 3, AT91C_UDP_EPEDS);

	// Enable endpoint 1 & 2 interrupts
	AT91F_SVC_USBIN_Open(&usbEp3, AT91C_BASE_UDP, 3, 8, 1);
//	AT91F_UDP_EnableIt(pUdp, (AT91C_UDP_EPINT1 | AT91C_UDP_EPINT2 | AT91C_UDP_EPINT3));
}

__inline void AT91F_USB_SetConfiguration(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	AT91PS_UDP   pUdp = pUSBCTL->pUdp; // Pointer to UDP registers
	AT91PF_SVC_USBCTL_RWComplete RWComplete = (AT91PF_SVC_USBCTL_RWComplete) 0; // Callback

	// Store the current configuration
	currentConfiguration = pUSBCTL->pSetup[2];

	// Move to the Configured State
	if (currentConfiguration) {
		// Reset  endpoints
		AT91F_UDP_ResetEp(pUdp, (AT91C_UDP_EPINT1 | AT91C_UDP_EPINT2 | AT91C_UDP_EPINT3));
		AT91F_UDP_ResetEp(pUdp, 0);
		//AT91F_UDP_EnableEp(pUdp, (AT91C_UDP_EPINT1 | AT91C_UDP_EPINT2));

		// Configure endpoints and enable them
		AT91F_UDP_EpSet(pUdp, 1, (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT)); // Endpoint 1 is a bulk out
		AT91F_UDP_EpSet(pUdp, 2, (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN));  // Endpoint 2 is a bulk in
		AT91F_UDP_EpSet(pUdp, 3, (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_ISO_IN));   // Endpoint 3 is a INT in

		// Init the Callback after STATUS IN
		RWComplete = AT91F_USB_SetConfigurationComplete;
	}

	// Move back to the Address State
	else {
		// Move the UDP function to the addressed state
		AT91F_UDP_SetState(pUdp, AT91C_UDP_FADDEN);

		// Enable endpoints
		AT91F_UDP_EpClear(pUdp, 1, AT91C_UDP_EPEDS);
		AT91F_UDP_EpClear(pUdp, 2, AT91C_UDP_EPEDS);

	}
	// Send a STATUS IN
	pUSBCTL->Write(pUSBCTL,	(char *) 0,	0, RWComplete);
}

//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_GetConfiguration
//* \brief Answer to a standard GET CONFIGURATION request
//*----------------------------------------------------------------------------
__inline void AT91F_USB_GetConfiguration(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	AT91PS_UDP   pUdp = pUSBCTL->pUdp; // Pointer to UDP registers

	// Send the current configuration
	AT91F_UDP_EpWrite(pUdp, 0, currentConfiguration);
	AT91F_UDP_EpEndOfWr(pUdp, 0);
}

//*----------------------------------------------------------------------------
//* \fn    AT91F_USB_GetStatusZero
//* \brief Answer to a standard GET STATUS ZERO request
//*----------------------------------------------------------------------------
__inline void AT91F_USB_GetStatusZero(
	AT91PS_SVC_USBCTL pUSBCTL)
{
	AT91PS_UDP   pUdp = pUSBCTL->pUdp; // Pointer to UDP registers

	// Return no Remote wakeup, not self powered (Cf. Fig 9.4 in USB Spec Rev 1.1)
	AT91F_UDP_EpWrite(pUdp, 0, 0);
	AT91F_UDP_EpWrite(pUdp, 0, 0);
	AT91F_UDP_EpEndOfWr(pUdp, 0);
}