//Project File
//=======================================================
#define MST_CHIP			MST716A
#define RM_EEPROM_TYPE  	RM_TYPE_24C16
#define TUNER_TYPE	  		TUNER_XF_6A //TUNER_LG_TALN_Z200T//
#define PANEL_TYPE			PanelPVI07_AT//PanelPVI07_AT
#define KEY_TYPE			Dual_ADCKey
#define KEY_PORT			SAR0|SAR1
#define TV_SYSTEM			TV_PAL
//==========Source DEFINE	 ====================================
#define TV_ENABLE                   1
#define VGA_ENABLE                  1
//==========AudioCtrl	DEFINE	 ====================================
#define AudioCtrl		 		PWM_TYPE_PWM1

//==========DSP  DEFINE ==========================================
#define ENABLE_VD_DSP			1
#define ENABLE_SECAM			1
#define CCFL_FUNCTION	        1
#define CCFL_BURST_MODE			1
#define LED_BACKLIGHT           0
//==========I/O setting==================================
#define hwBlacklit_Pin			P0_4
#define hw_SetBlacklit()        hwBlacklit_Pin=0
#define hw_ClrBlacklit()        hwBlacklit_Pin=1

#define hwPanelPower_Pin		P0_3
#define hw_SetPanelPower()		hwPanelPower_Pin=0
#define hw_ClrPanelPower()		hwPanelPower_Pin=1

#define hwTuner_pin  			P4   //P4.0
#define hw_SetTunerOn()		       {g_ucP4Value&=~0x02;hwTuner_pin=g_ucP4Value;}
#define hw_SetTunerOff()		       {g_ucP4Value|=0x02;hwTuner_pin=g_ucP4Value;}

#define hwI2C_SCL_Pin			P0_2
#define hwI2C_SDA_Pin			P0_1

#define hwI2C_SCL_Pin_STATUS 	(hwI2C_SCL_Pin)
#define hwI2C_SDA_Pin_STATUS 	(hwI2C_SDA_Pin)

#define hw_SetGreenLed()	msWriteByte(BK0_00_REGBK, REG_BANK1_ADC_ACE_MCU);\
                                               msWriteByte(BK1_F5_PWM2C, 0x00);\
							msWriteByte(BK0_00_REGBK, REG_BANK_SCALER);

#define hw_ClrGreenLed()	msWriteByte(BK0_00_REGBK, REG_BANK1_ADC_ACE_MCU);\
                                               msWriteByte(BK1_F5_PWM2C, 0x00);\
							msWriteByte(BK0_00_REGBK, REG_BANK_SCALER);

//============Audio Setting================================
#define P6_GPIO_Enable
#define P5_GPIO_Enable
#define Init_P0_Value		0xE7
#define Init_P4_Value		0xFD
#define Init_P6_Value		0xFF
#define Init_P5_Value		0x0F

#define hwAudioMute_Pin         P5_3
#define hw_SetAudioMute()       hwAudioMute_Pin =1
#define hw_ClrAudioMute()       hwAudioMute_Pin =0

#define hwAudioStby_Pin         P5_2
#define hw_SetAudioStby()       hwAudioStby_Pin =1
#define hw_ClrAudioStby()       hwAudioStby_Pin =0

#define hwAudioMux_Pin_1	    P5_0
#define hwAudioMux_Pin_2	    P5_1
#define hw_SetAudioMuxToCVBS() 	 {hwAudioMux_Pin_1=0; hwAudioMux_Pin_2=0;}
#define hw_SetAudioMuxToVGA()	 {hwAudioMux_Pin_1=0; hwAudioMux_Pin_2=1;}
#define hw_SetAudioMuxToTuner()	 {hwAudioMux_Pin_1=1; hwAudioMux_Pin_2=0;}

#define INIT_AudioVolume_X0    0x00
#define INIT_AudioVolume_X1    0x20
#define INIT_AudioVolume_X2    0x40
#define INIT_AudioVolume_X3    0x60
#define INIT_AudioVolume_X4    0x70
//=================================================================
#if(KEY_TYPE==Single_ADCKey)
#define KEY_AD_L0	0x00//0x02
#define KEY_AD_L1	0x07//0x0E
#define KEY_AD_L2	0x10//0x1E
#define KEY_AD_L3	0x19//0x2D
#define KEY_AD_L4	0x21//0x1E
#define KEY_AD_L5	0x2C//0x2D
#define KEY_AD_DELTA	0x05 // tolerance
#elif(KEY_TYPE==Dual_ADCKey)
#define KEY_AD_L0	0x00//0x02
#define KEY_AD_L1	0x0C//0x0E
#define KEY_AD_L2	0x1B//0x1E
#define KEY_AD_L3	0x2A//0x2D
#define KEY_AD_DELTA	5// tolerance
#endif
//=================================================================

typedef enum
{
 Input_CVBS1,
 Input_VGA,
 Input_SVIDEO1,
 Input_TV,
 Input_Nums,
 Input_CVBS2,
 Input_CVBS3,
 Input_CVBS4,
 Input_CVBS5,
 Input_CVBS6,

 Input_SVIDEO2,


// Input_YPbPr,

 Input_Nothing,
 Input_AllPort=0xFF
} InputPortType;

#define CVBS1_RealPortSet		PORT_CVBS1
#define CVBS2_RealPortSet		PORT_CVBS2
#define TV_RealPortSet			PORT_CVBS2
#define CVBS3_RealPortSet		PORT_CVBS_SV1Y
#define CVBS4_RealPortSet		PORT_CVBS_SV1C
#define CVBS5_RealPortSet		PORT_CVBS_SV1C
#define CVBS6_RealPortSet		PORT_CVBS_SV1C
#define SVIDEO1_RealPortSet		PORT_SV1
#define SVIDEO2_RealPortSet		PORT_SV2
#define VGA_RealPortSet			PORT_VGA
#define YPbPr_RealPortSet		PORT_YPbPr