/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			Chap_9.c
** Last modified Date:	2005-8-6
** Last Version:		V1.0
** Descriptions:		chap_9.c, 實現USB1.1協議
**						chap_9.c, realize USB1.1 protocol
**------------------------------------------------------------------------------------------------------
** Created by:			鄭明遠 		MingYuan Zheng
** Created date:		2005-8-6
** Version:				V1.0
** Descriptions:		初始版本	The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			
** Modified date:
** Version:				
** Descriptions:
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#include "config.h"
#include "USBConfig.h"

#include "USBCI.h"
#include "USBDriver.h"
#include "Chap_9.h"
#include "Descriptor.h"

/* define control transfer structure variable */
CONTROL_XFER ControlData;								/* 定義傳輸控制結構變量 */

/*************************************************************************
** 函數名稱:  USB 標準設備請求入口地址指針表
** Function:  Entry address of USB standard device request Function 
**************************************************************************/
void (*StandardDeviceRequest[])(void) =
{
	get_status,
	clear_feature,
	reserved,
	set_feature,
	reserved,
	set_address,
	get_descriptor,
	reserved,
	get_configuration,
	set_configuration,
	get_interface,
	set_interface,
	reserved,
	reserved,
	reserved,
	reserved
};

   //*************************************************************************
   //		 		USB 協議層函數       USB Protocal Function 
   //*************************************************************************

/*************************************************************************************************
** 函數名稱: stall_ep0()							Name:  	  stall_ep0()	
** 功能描述: 使控制端點處于停止狀態					Function: stall logical endpoint 0
*************************************************************************************************/   
void stall_ep0(void)
{
	USB_SetEndpointStatus(0, 1);
	USB_SetEndpointStatus(1, 1);
}
   
/*************************************************************************************************
** 函數名稱: reserved()								Name:  	  reserved()
** 功能描述: 保留子程序                        		Function: reserved function
*************************************************************************************************/
void reserved(void)
{
	stall_ep0();
}

/*************************************************************************************************
** 函數名稱: init_unconfig()						Name:  	  init_unconfig()
** 功能描述: 進入地址狀態,禁止 0 除外的所有端點		Function: disable all endpoints except for control endpoint 0
*************************************************************************************************/
void init_unconfig(void)
{
	USB_SetEndpointEnable(0);
}

/*************************************************************************************************
** 函數名稱: init_config()							Name:  	 init_config()
** 功能描述: 配置處理,允許端點收發					Function: enable all endpoints		
*************************************************************************************************/
void init_config(void)
{
	USB_SetEndpointEnable(1);
}

/*************************************************************************************************
** 函數名稱: single_transmit()						Name:  	  single_transmit()
** 功能描述: 通過物理端點 1 發送數據				Function: send data by physical endpoint 1
** 輸	 入: INT8U * buf:	發送數據指針			Input:	  INT8U * buf:  send buffer		
			 INT8U len:		發送數據長度					  INT8U len:	send data length
** 輸	 出: 無										Output:	  NULL
*************************************************************************************************/
void single_transmit(INT8U * buf, INT8U len)
{
	/* the len must below the maxpacket size of physical endpoint 1 */	
	if( len <= EP0_PACKET_SIZE)
	{												/* len 必須小于端點的最大包信息長度 */
		USB_WriteEndpoint(1, len, buf);
	}
}

/*************************************************************************************************
** 函數名稱: code_transmit()						Name:  	   code_transmit()
** 功能描述: 通過物理端點 1 發送數據				Function:  send data by physical endpoint 1
** 輸	 入: INT8U  *pRomData:	發送數據指針		Inptut:	   INT8U * buf:  send buffer		
			 INT16U len:		發送數據長度		INT8U len: send data length(the value can above 
			 												   EP0_PACKET_SIZE) 
** 輸	 出: 無										Output:    NULL
*************************************************************************************************/
void code_transmit(INT8U * pRomData, INT16U len)
{
	ControlData.wCount = 0;
	
	if(ControlData.wLength > len)
		ControlData.wLength = len;									/* 長度要小于len 		the wLength can't above len */

	ControlData.pData = pRomData;
	if( ControlData.wLength >= EP0_PACKET_SIZE)
	{	/* wLength above MaxPacketSize of physical endpoint 1 */
		USB_WriteEndpoint(1, EP0_PACKET_SIZE, ControlData.pData);	
		ControlData.wCount += EP0_PACKET_SIZE;						/* 計數器累加			count number have been sent */

		DISABLE();
		bEPPflags.bits.control_state = USB_TRANSMIT;				/* 標識發送狀態			flag transmit state */		
		ENABLE();
	}
	else 
	{
		USB_WriteEndpoint(1, ControlData.wLength, pRomData);		/* 將全部數據寫入端點 	write all data into endpoint */
		ControlData.wCount += ControlData.wLength;					/* 計數器累加			count number have been sent */
		DISABLE();
		bEPPflags.bits.control_state = USB_IDLE;					/* 標識空閑狀態			flag IDLE state */
		ENABLE();
	}
}



   //*************************************************************************
   // USB 標準設備請求服務程序    USB standard device request service program
   //*************************************************************************


/***************************************************************************************************************
** 函數名稱: get_status()							Name:  	  get_status()
** 功能描述: 主機要求獲取狀態,設備返回16位的		Function: the USB host request get the status of USB device,
			 狀態描述符給主機								  USB device will response 16-bit descriptor 
****************************************************************************************************************/
void get_status(void)
{
	INT8U endp, txdat[2], c;
	INT8U bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;	
																/* 獲取請求類型			get the Request type */	
	if (bRecipient == USB_RECIPIENT_DEVICE) 
	{	/* request device */ 
		if(bEPPflags.bits.remote_wakeup == 1)			
			txdat[0] = 3;										/* 支持遠程喚醒和自供電	support reamote wakeup and power itself */ 
		else
			txdat[0] = 1;										/* 不支持以上兩個功能	not support two function above */
		txdat[1]=0;												/* 高 8 位清 0          upper 8-bit clear */
		single_transmit(txdat, 2);								/* 發送16ibt到USB主機	transmit 16-bit to USB host */
	} 
	
	else if (bRecipient == USB_RECIPIENT_INTERFACE) 
	{	/* request interface */
		txdat[0]=0;
		txdat[1]=0;
		single_transmit(txdat, 2);								/* 發送16ibt到USB主機	transmit 16-bit to USB host */
	}
	
	else if (bRecipient == USB_RECIPIENT_ENDPOINT) 
	{	/* request endpoint */
		endp = (INT8U)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (INT8U)USB_ENDPOINT_DIRECTION_MASK)
			c = USB_SelectEndpoint(endp * 2 + 1);				/* 讀 IN 端點狀態		read status of the IN endpoint */
		else
			c = USB_SelectEndpoint(endp * 2);					/* 讀 OUT 端點狀態		read status of the OUT endpoint */
		if(c & USB_STALL)
			txdat[0] = 1;										/* 端點已被禁止			the endpoint is stalled */
		else
			txdat[0] = 0;										/* 端點已解禁			the endpoint is unstalled */
		txdat[1] = 0;
		single_transmit(txdat, 2);								/* 發送16ibt到USB主機	transmit 16-bit to USB host */

	}
	else
		stall_ep0();											/* 非標準請求,禁止邏輯端點0 */
																/* not standard request, stall logical endpoint 0 */	
}																


/***************************************************************************************************************
** 函數名稱: clear_feature()						Name:  	  clear_feature()
** 功能描述: 清除特性								Function: clear feature
****************************************************************************************************************/
void clear_feature(void)
{
	INT8U endp;
	INT8U bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;
																/* 獲取請求類型	 		 get request type */
	if (bRecipient == USB_RECIPIENT_DEVICE					
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_REMOTE_WAKEUP)
    {	/* request device */
		DISABLE();								
		bEPPflags.bits.remote_wakeup = 0;						/* 清除遠程喚醒特性		clear reamote wakeup feature */	
		ENABLE();
		single_transmit(0, 0);									/* 返回一個空包			return an empty packet */
	}
	
	else if (bRecipient == USB_RECIPIENT_ENDPOINT
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_ENDPOINT_STALL)
	{
		/* request endpoint */
		endp = (INT8U)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (INT8U)USB_ENDPOINT_DIRECTION_MASK)
			USB_SetEndpointStatus(endp * 2 + 1, 0);				/* 解禁 IN 端點			the IN endpoint is unstalled */
		else
			USB_SetEndpointStatus(endp * 2, 0);					/* 解禁 OUT 端點		the OUT endpoint is unstalled */
		single_transmit(0, 0);									/* 發送空包表示執行成功 return an empty packet indicate perform sucessfully */
	} else
		stall_ep0();											/* 不成功,禁止邏輯端點0 not the request, stall logical endpoint 0 */							
}


/***************************************************************************************************************
** 函數名稱: set_feature()				   			Name:  	 set_feature() 
** 功能描述: 設置特性							    Function: set feature
****************************************************************************************************************/
void set_feature(void)
{
	INT8U endp;											
	INT8U bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;
																/* 獲取請求類型			get request type */
	if (bRecipient == USB_RECIPIENT_DEVICE						/* 請求設備				request device */
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_REMOTE_WAKEUP) 
	{	
		DISABLE();
		bEPPflags.bits.remote_wakeup = 1;						/* 設置遠程喚醒標志		set reamote wakeup flag */
		ENABLE();
		single_transmit(0, 0);									/* 返回一個空包			return an empty packet */
	}	
	
	else if (bRecipient == USB_RECIPIENT_ENDPOINT				/* 請求端點				request endpoint */
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_ENDPOINT_STALL)
	{
		endp = (INT8U)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (INT8U)USB_ENDPOINT_DIRECTION_MASK)
			USB_SetEndpointStatus(endp * 2 + 1, 1);				/* IN 端點被禁止		the IN endpoint is stalled */
		else
			USB_SetEndpointStatus(endp * 2, 1);					/* OUT端點被禁止		the OUT endpoint is stalled */
		single_transmit(0, 0);									/* 返回一個空包			return an empty packet */
	} else
		stall_ep0();											/* 非標準請求,禁止邏輯端點0  not the request, stall logical endpoint 0 */
}

/***************************************************************************************************************
** 函數名稱: set_address()			   				Name:  	  set_address()
** 功能描述: 設置地址						   		Function: set the address of the USB device 
****************************************************************************************************************/
void set_address(void)
{
	USB_SetAddressEnable((INT8U)(ControlData.DeviceRequest.wValue &
						 DEVICE_ADDRESS_MASK), 1);

	single_transmit(0, 0);										/* 返回一個空包		return an empty packet */
}


/***********  USB  Mouse report descriptor   2007-03-20**********/
const INT8U Mouse_Descr[52]=
{
	0x05,0x01,
	0x09,0x02,