/* * vivi/include/s3c2400.h * * Definition of constants related to the S3C2410 microprocessor(based on ARM 290T). * This file is based on the S3C2400 User Manual 2002,01,23. * * Copyright (C) 2002 MIZI Research, Inc. * *  Author: Janghoon Lyu <nandy@mizi.com> *  Date  : $Date: 2002/10/11 02:27:29 $ * *  $Revision: 1.8 $ *//* * History *  * 2002-05-14: Janghoon Lyu <nandy@mizi.com> *    - Initial code */#include "hardware.h"#include "bitfield.h"#define USR26_MODE		0x00#define FIQ26_MODE		0x01#define IRQ26_MODE		0x02#define SVC26_MODE		0x03#define USR_MODE		0x10#define FIQ_MODE		0x11#define IRQ_MODE		0x12#define SVC_MODE		0x13#define ABT_MODE		0x17#define UND_MODE		0x1b#define SYSTEM_MODE		0x1f#define MODE_MASK		0x1f#define F_BIT			0x40#define I_BIT			0x80#define CC_V_BIT		(1 << 28)#define CC_C_BIT		(1 << 29)#define CC_Z_BIT		(1 << 30)#define CC_N_BIT		(1 << 31)/* Memory Controller */#define MEM_CTL_BASE		0x48000000#define bMEMCTL(Nb)		__REGl(MEM_CTL_BASE + (Nb))/* Offset */#define oBWSCON			0x00	/* R/W, Bus width and wait status ctrl reg. */#define oBANKCON0		0x04	/* R/W, Bank 0 control reg. */#define oBANKCON1		0x08	/* R/W, Bank 1 control reg. */#define oBANKCON2		0x0C	/* R/W, Bank 2 control reg. */#define oBANKCON3		0x10	/* R/W, Bank 3 control reg. */#define oBANKCON4		0x14	/* R/W, Bank 4 control reg. */#define oBANKCON5		0x18	/* R/W, Bank 5 control reg. */#define oBANKCON6		0x1C	/* R/W, Bank 6 control reg. */#define oBANKCON7		0x20	/* R/W, Bank 7 control reg. */#define oREFRESH		0x24	/* R/W, SDRAM refresh control register */#define oBANKSIZE		0x28	/* R/W, Flexible bank size register */#define oMRSRB6			0x2C	/* R/W, Mode register set register bank 6 */#define oMRSRB7			0x30	/* R/W, Mode register set register bank 7 *//* Registers */#define BWSCON			bMEMCTL(oBWSCON)#define BANKCON0		bMEMCTL(oBANKCON0)#define BANKCON1		bMEMCTL(oBANKCON1)#define BANKCON2		bMEMCTL(oBANKCON2)#define BANKCON3		bMEMCTL(oBANKCON3)#define BANKCON4		bMEMCTL(oBANKCON4)#define BANKCON5		bMEMCTL(oBANKCON5)#define BANKCON6		bMEMCTL(oBANKCON6)#define BANKCON7		bMEMCTL(oBANKCON7)#define REFRESH			bMEMCTL(oREFRESH)#define BANKSIZE		bMEMCTL(oBANKSIZE)#define MRSRB6			bMEMCTL(oMRSRB6)#define MRSRB7			bMEMCTL(oMRSRB7)/* Bits */#define SELF_REFRESH		(1 << 22)/* Clock and Power Management */#define CLK_CTL_BASE		0x4C000000#define bCLKCTL(Nb)		__REGl(CLK_CTL_BASE + (Nb))/* Offset */#define oLOCKTIME		0x00	/* R/W, PLL lock time count register */#define oMPLLCON		0x04	/* R/W, MPLL configuration register */#define oUPLLCON		0x08	/* R/W, UPLL configuration register */#define oCLKCON			0x0C	/* R/W, Clock generator control reg. */#define oCLKSLOW		0x10	/* R/W, Slow clock control register */#define oCLKDIVN		0x14	/* R/W, Clock divider control *//* Registers */#define LOCKTIME		bCLKCTL(oLOCKTIME)#define MPLLCON			bCLKCTL(oMPLLCON)#define UPLLCON			bCLKCTL(oUPLLCON)#define CLKCON			bCLKCTL(oCLKCON)#define CLKSLOW			bCLKCTL(oCLKSLOW)#define CLKDIVN			bCLKCTL(oCLKDIVN)/* Fields */#define fMPLL_MDIV		Fld(8,12)#define fMPLL_PDIV		Fld(6,4)#define fMPLL_SDIV		Fld(2,0)/* macros */#define GET_MDIV(x)		FExtr(x, fMPLL_MDIV)#define GET_PDIV(x)		FExtr(x, fMPLL_PDIV)#define GET_SDIV(x)		FExtr(x, fMPLL_SDIV)/* GPIO */#define GPIO_CTL_BASE		0x56000000#define bGPIO(p,o)		__REGl(GPIO_CTL_BASE + (p) + (o))/* Offset */#define oGPIO_CON		0x0	/* R/W, Configures the pins of the port */#define oGPIO_DAT		0x4	/* R/W,	Data register for port */#define oGPIO_UP		0x8	/* R/W, Pull-up disable register */#define oGPIO_RESERVED		0xC	/* R/W, Reserved */#define oGPIO_A			0x00#define oGPIO_B			0x10#define oGPIO_C			0x20#define oGPIO_D			0x30#define oGPIO_E			0x40#define oGPIO_F			0x50#define oGPIO_G			0x60#define oGPIO_H			0x70#define oMISCCR			0x80	/* R/W, Miscellaneous control register */#define oDCLKCON		0x84	/* R/W, DCLK0/1 control register */#define oEXTINT0		0x88	/* R/W, External interrupt control reg. 0 */#define oEXTINT1		0x8C	/* R/W, External interrupt control reg. 1 */#define oEXTINT2		0x90	/* R/W, External interrupt control reg. 2 */#define oEINTFLT0		0x94	/* R/W, Reserved */#define oEINTFLT1		0x98	/* R/W, Reserved */#define oEINTFLT2		0x9C	/* R/W, External interrupt control reg. 2 */#define oEINTFLT3		0xA0	/* R/W, External interrupt control reg. 3 */#define oEINTMASK		0xA4	/* R/W, External interrupt mask register */#define oEINTPEND		0xA8	/* R/W, External interrupt pending reg. *//* Registers */#define GPACON			bGPIO(oGPIO_A, oGPIO_CON)#define GPADAT			bGPIO(oGPIO_A, oGPIO_DAT)#define GPBCON			bGPIO(oGPIO_B, oGPIO_CON)#define GPBDAT			bGPIO(oGPIO_B, oGPIO_DAT)#define GPBUP			bGPIO(oGPIO_B, oGPIO_UP)#define GPCCON			bGPIO(oGPIO_C, oGPIO_CON)#define GPCDAT			bGPIO(oGPIO_C, oGPIO_DAT)#define GPCUP			bGPIO(oGPIO_C, oGPIO_UP)#define GPDCON			bGPIO(oGPIO_D, oGPIO_CON)#define GPDDAT			bGPIO(oGPIO_D, oGPIO_DAT)#define GPDUP			bGPIO(oGPIO_D, oGPIO_UP)#define GPECON			bGPIO(oGPIO_E, oGPIO_CON)#define GPEDAT			bGPIO(oGPIO_E, oGPIO_DAT)#define GPEUP			bGPIO(oGPIO_E, oGPIO_UP)#define GPFCON			bGPIO(oGPIO_F, oGPIO_CON)#define GPFDAT			bGPIO(oGPIO_F, oGPIO_DAT)#define GPFUP			bGPIO(oGPIO_F, oGPIO_UP)#define GPGCON			bGPIO(oGPIO_G, oGPIO_CON)#define GPGDAT			bGPIO(oGPIO_G, oGPIO_DAT)#define GPGUP			bGPIO(oGPIO_G, oGPIO_UP)#define GPHCON			bGPIO(oGPIO_H, oGPIO_CON)#define GPHDAT			bGPIO(oGPIO_H, oGPIO_DAT)#define GPHUP			bGPIO(oGPIO_H, oGPIO_UP)#define MISCCR			bGPIO(oMISCCR, 0)#define DCLKCON			bGPIO(oDCLKCON, 0)#define EXTINT0			bGPIO(oEXTINT0, 0)#define EXTINT1			bGPIO(oEXTINT1, 0)#define EXTINT2			bGPIO(oEXTINT2, 0)#define EINTFLT0		bGPIO(oEINTFLT0, 0)#define EINTFLT1		bGPIO(oEINTFLT1, 0)#define EINTFLT2		bGPIO(oEINTFLT2, 0)#define EINTFLT3		bGPIO(oEINTFLT3, 0)#define EINTMASK		bGPIO(oEINTMASK, 0)#define EINTPEND		bGPIO(oEINTPEND, 0)/* UART */#define UART_CTL_BASE		0x50000000#define UART0_CTL_BASE		UART_CTL_BASE#define UART1_CTL_BASE		UART_CTL_BASE + 0x4000#define UART2_CTL_BASE		UART_CTL_BASE + 0x8000#define bUART(x, Nb)		__REGl(UART_CTL_BASE + (x)*0x4000 + (Nb))#define bUARTb(x, Nb)		__REGb(UART_CTL_BASE + (x)*0x4000 + (Nb))/* Offset */#define oULCON			0x00	/* R/W, UART line control register */#define oUCON			0x04	/* R/W, UART control register */#define oUFCON			0x08	/* R/W, UART FIFO control register */#define oUMCON			0x0C	/* R/W, UART modem control register */#define oUTRSTAT		0x10	/* R  , UART Tx/Rx status register */#define oUERSTAT		0x14	/* R  , UART Rx error status register */#define oUFSTAT			0x18	/* R  , UART FIFO status register */#define oUMSTAT			0x1C	/* R  , UART Modem status register */#define oUTXHL			0x20	/*   W, UART transmit(little-end) buffer */#define oUTXHB			0x23	/*   W, UART transmit(big-end) buffer */#define oURXHL			0x24	/* R  , UART receive(little-end) buffer */#define oURXHB			0x27	/* R  , UART receive(big-end) buffer */#define oUBRDIV			0x28	/* R/W, Baud rate divisor register *//* Registers */#define ULCON0			bUART(0, oULCON)#define UCON0			bUART(0, oUCON)#define UFCON0			bUART(0, oUFCON)#define UMCON0			bUART(0, oUMCON)#define UTRSTAT0		bUART(0, oUTRSTAT)#define UERSTAT0		bUART(0, oUERSTAT)#define UFSTAT0			bUART(0, oUFSTAT)#define UMSTAT0			bUART(0, oUMSTAT)#define UTXH0			bUARTb(0, oUTXHL)#define URXH0			bUARTb(0, oURXHL)#define UBRDIV0			bUART(0, oUBRDIV)#define ULCON1			bUART(1, oULCON)#define UCON1			bUART(1, oUCON)#define UFCON1			bUART(1, oUFCON)#define UMCON1			bUART(1, oUMCON)#define UTRSTAT1		bUART(1, oUTRSTAT)#define UERSTAT1		bUART(1, oUERSTAT)#define UFSTAT1			bUART(1, oUFSTAT)#define UMSTAT1			bUART(1, oUMSTAT)#define UTXH1			bUARTb(1, oUTXHL)#define URXH1			bUARTb(1, oURXHL)#define UBRDIV1			bUART(1, oUBRDIV)#define ULCON2			bUART(2, oULCON)#define UCON2			bUART(2, oUCON)#define UFCON2			bUART(2, oUFCON)#define UMCON2			bUART(2, oUMCON)#define UTRSTAT2		bUART(2, oUTRSTAT)#define UERSTAT2		bUART(2, oUERSTAT)#define UFSTAT2			bUART(2, oUFSTAT)#define UMSTAT2			bUART(2, oUMSTAT)#define UTXH2			bUARTb(2, oUTXHL)#define URXH2			bUARTb(2, oURXHL)#define UBRDIV2			bUART(2, oUBRDIV)/* ... */#define UTRSTAT_TX_EMPTY	(1 << 2)#define UTRSTAT_RX_READY	(1 << 0)#define UART_ERR_MASK		0xF /* Interrupts */#define INT_CTL_BASE		0x4A000000#define bINT_CTL(Nb)		__REG(INT_CTL_BASE + (Nb))/* Offset */#define oSRCPND			0x00