/****************************************Copyright (c)**************************************************

********************************************************************************************************/

#define IN_TARGET
#include "config.h"
void timer0_init(void);
void int_init(void);
void lcd_init(void);
/*********************************************************************************************************
** Function name:			IRQ_Exception
**
** Descriptions:			interrupt exceptional handler , change it as needed

********************************************************************************************************/
        void __irq IRQ_Exception(void)
{
    while(1);                   //  change it to your code 這一句替換為自己的代碼
}

/*********************************************************************************************************
** Function name:			FIQ_Exception
**
** Descriptions:			Fast interrupt exceptional handler , change it as needed

********************************************************************************************************/
        void FIQ_Exception(void)
{
    while(1);                   // change it to your code  這一句替換為自己的代碼
}

/*********************************************************************************************************
** Function name:			TargetInit
**
** Descriptions:			Initialize the target board; it is called in a necessary place, change it as 

********************************************************************************************************/
       void TargetInit(void)
{
    lcd_init();
	
	int_init();
	
    timer0_init();
  PWMPR=0x00;                      //不分頻,計數頻率為Fpclk
  PWMMCR=0x02;                     //設置PWMMR0匹配時復位PWMTC
  PWMMR0=Fpclk/2.5;                     //設置PWM周期
  PWMMR4=Fpclk/5;                     //設置PWM占空比
  PWMLER=0x11;                     //PWMMR0,PWMMR4鎖存
  PWMPCR=0x1000;                   //允許PWM4輸出,單邊PWM
  PWMTCR=0x09;                     //啟動定時器,PWM使能
   /* 添加自己的代碼 */
    /* Add your codes here */
}


 

/*********************************************************************************************************
** Function name:			TargetResetInit
**
** Descriptions:			Initialize the target board before running the main() function; User may
**							change it as needed, but may not deleted it.

********************************************************************************************************/
        void TargetResetInit(void)
{
#ifdef __DEBUG_RAM    
    MEMMAP = 0x2;                   //remap
#endif

#ifdef __DEBUG_FLASH    
    MEMMAP = 0x1;                   //remap
#endif

#ifdef __IN_CHIP    
    MEMMAP = 0x1;                   //remap
#endif

/* 設置系統各部分時鐘 */
/* Set system timers for each component */
    PLLCON = 1;
#if (Fpclk / (Fcclk / 4)) == 1
    VPBDIV = 0;
#endif
#if (Fpclk / (Fcclk / 4)) == 2
    VPBDIV = 2;
#endif
#if (Fpclk / (Fcclk / 4)) == 4
    VPBDIV = 1;
#endif

#if (Fcco / Fcclk) == 2
    PLLCFG = ((Fcclk / Fosc) - 1) | (0 << 5);
#endif
#if (Fcco / Fcclk) == 4
    PLLCFG = ((Fcclk / Fosc) - 1) | (1 << 5);
#endif
#if (Fcco / Fcclk) == 8
    PLLCFG = ((Fcclk / Fosc) - 1) | (2 << 5);
#endif
#if (Fcco / Fcclk) == 16
    PLLCFG = ((Fcclk / Fosc) - 1) | (3 << 5);
#endif
    PLLFEED = 0xaa;
    PLLFEED = 0x55;
    while((PLLSTAT & (1 << 10)) == 0);
    PLLCON = 3;
    PLLFEED = 0xaa;
    PLLFEED = 0x55;
    
    /* 設置存儲器加速模塊 */
    /* Set memory accelerater module*/
    MAMCR = 0;
#if Fcclk < 20000000
    MAMTIM = 1;
#else
#if Fcclk < 40000000
    MAMTIM = 2;
#else
    MAMTIM = 3;
#endif
#endif
    MAMCR = 2;
    
    /* 初始化VIC */
    /* initialize VIC*/
    VICIntEnClr = 0xffffffff;
    VICVectAddr = 0;
    VICIntSelect = 0;

    /* 添加自己的代碼 */
    /* Add your codes here */

}
/*********************************************************************************************************
**                  以下為一些與系統相關的庫函數的實現
**                  具體作用請ads的參考編譯器與庫函數手冊
**                  用戶可以根據自己的要求修改        
********************************************************************************************************/
/*********************************************************************************************************
**                  The implementations for some library functions
**                  For more details, please refer to the ADS compiler handbook and The library 
**					function manual
**                  User could change it as needed       
********************************************************************************************************/

#include "rt_sys.h"
#include "stdio.h"

#pragma import(__use_no_semihosting_swi)
#pragma import(__use_two_region_memory)

        int __rt_div0(int a)
{
    a = a;
    return 0;
}

        int fputc(int ch,FILE *f)
{
    ch = ch;
    f = f;
    return 0;
}

    int fgetc(FILE *f)
{
    f = f;
    return 0;
}


        int _sys_close(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

        int _sys_write(FILEHANDLE fh, const unsigned char * buf,
                      unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    return 0;
}
        int _sys_read(FILEHANDLE fh, unsigned char * buf,
                     unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    
    return 0;
}

       void _ttywrch(int ch)
{
    ch = ch;
}

        int _sys_istty(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}
        int _sys_seek(FILEHANDLE fh, long pos)
{
    fh = fh;
    return 0;
}
        int _sys_ensure(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

        long _sys_flen(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}
       int _sys_tmpnam(char * name, int sig, unsigned maxlen)
{
    name = name;
    sig = sig;
    maxlen = maxlen;
    return 0;
}

        void _sys_exit(int returncode)
{
    returncode = returncode;
}

        char *_sys_command_string(char * cmd, int len)
{
    cmd = cmd;
    len = len;
    return 0;
}



/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/