?? at91sam7x256_inc.h
字號(hào):
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Parallel Input Output Controler
// *****************************************************************************
// *** Register offset in AT91S_PIO structure ***
#define PIO_PER ( 0) // PIO Enable Register
#define PIO_PDR ( 4) // PIO Disable Register
#define PIO_PSR ( 8) // PIO Status Register
#define PIO_OER (16) // Output Enable Register
#define PIO_ODR (20) // Output Disable Registerr
#define PIO_OSR (24) // Output Status Register
#define PIO_IFER (32) // Input Filter Enable Register
#define PIO_IFDR (36) // Input Filter Disable Register
#define PIO_IFSR (40) // Input Filter Status Register
#define PIO_SODR (48) // Set Output Data Register
#define PIO_CODR (52) // Clear Output Data Register
#define PIO_ODSR (56) // Output Data Status Register
#define PIO_PDSR (60) // Pin Data Status Register
#define PIO_IER (64) // Interrupt Enable Register
#define PIO_IDR (68) // Interrupt Disable Register
#define PIO_IMR (72) // Interrupt Mask Register
#define PIO_ISR (76) // Interrupt Status Register
#define PIO_MDER (80) // Multi-driver Enable Register
#define PIO_MDDR (84) // Multi-driver Disable Register
#define PIO_MDSR (88) // Multi-driver Status Register
#define PIO_PPUDR (96) // Pull-up Disable Register
#define PIO_PPUER (100) // Pull-up Enable Register
#define PIO_PPUSR (104) // Pull-up Status Register
#define PIO_ASR (112) // Select A Register
#define PIO_BSR (116) // Select B Register
#define PIO_ABSR (120) // AB Select Status Register
#define PIO_OWER (160) // Output Write Enable Register
#define PIO_OWDR (164) // Output Write Disable Register
#define PIO_OWSR (168) // Output Write Status Register
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Clock Generator Controler
// *****************************************************************************
// *** Register offset in AT91S_CKGR structure ***
#define CKGR_MOR ( 0) // Main Oscillator Register
#define CKGR_MCFR ( 4) // Main Clock Frequency Register
#define CKGR_PLLR (12) // PLL Register
// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable
#define AT91C_CKGR_OSCBYPASS (0x1 << 1) // (CKGR) Main Oscillator Bypass
#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time
// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency
#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready
// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register --------
#define AT91C_CKGR_DIV (0xFF << 0) // (CKGR) Divider Selected
#define AT91C_CKGR_DIV_0 (0x0) // (CKGR) Divider output is 0
#define AT91C_CKGR_DIV_BYPASS (0x1) // (CKGR) Divider is bypassed
#define AT91C_CKGR_PLLCOUNT (0x3F << 8) // (CKGR) PLL Counter
#define AT91C_CKGR_OUT (0x3 << 14) // (CKGR) PLL Output Frequency Range
#define AT91C_CKGR_OUT_0 (0x0 << 14) // (CKGR) Please refer to the PLL datasheet
#define AT91C_CKGR_OUT_1 (0x1 << 14) // (CKGR) Please refer to the PLL datasheet
#define AT91C_CKGR_OUT_2 (0x2 << 14) // (CKGR) Please refer to the PLL datasheet
#define AT91C_CKGR_OUT_3 (0x3 << 14) // (CKGR) Please refer to the PLL datasheet
#define AT91C_CKGR_MUL (0x7FF << 16) // (CKGR) PLL Multiplier
#define AT91C_CKGR_USBDIV (0x3 << 28) // (CKGR) Divider for USB Clocks
#define AT91C_CKGR_USBDIV_0 (0x0 << 28) // (CKGR) Divider output is PLL clock output
#define AT91C_CKGR_USBDIV_1 (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
#define AT91C_CKGR_USBDIV_2 (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Power Management Controler
// *****************************************************************************
// *** Register offset in AT91S_PMC structure ***
#define PMC_SCER ( 0) // System Clock Enable Register
#define PMC_SCDR ( 4) // System Clock Disable Register
#define PMC_SCSR ( 8) // System Clock Status Register
#define PMC_PCER (16) // Peripheral Clock Enable Register
#define PMC_PCDR (20) // Peripheral Clock Disable Register
#define PMC_PCSR (24) // Peripheral Clock Status Register
#define PMC_MOR (32) // Main Oscillator Register
#define PMC_MCFR (36) // Main Clock Frequency Register
#define PMC_PLLR (44) // PLL Register
#define PMC_MCKR (48) // Master Clock Register
#define PMC_PCKR (64) // Programmable Clock Register
#define PMC_IER (96) // Interrupt Enable Register
#define PMC_IDR (100) // Interrupt Disable Register
#define PMC_SR (104) // Status Register
#define PMC_IMR (108) // Interrupt Mask Register
// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock
#define AT91C_PMC_UDP (0x1 << 7) // (PMC) USB Device Port Clock
#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output
// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register --------
// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register --------
// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register --------
// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection
#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected
#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected
#define AT91C_PMC_CSS_PLL_CLK (0x3) // (PMC) Clock from PLL is selected
#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler
#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock
#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2
#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4
#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8
#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16
#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32
#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64
// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask
#define AT91C_PMC_LOCK (0x1 << 2) // (PMC) PLL Status/Enable/Disable/Mask
#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Reset Controller Interface
// *****************************************************************************
// *** Register offset in AT91S_RSTC structure ***
#define RSTC_RCR ( 0) // Reset Control Register
#define RSTC_RSR ( 4) // Reset Status Register
#define RSTC_RMR ( 8) // Reset Mode Register
// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register --------
#define AT91C_RSTC_PROCRST (0x1 << 0) // (RSTC) Processor Reset
#define AT91C_RSTC_PERRST (0x1 << 2) // (RSTC) Peripheral Reset
#define AT91C_RSTC_EXTRST (0x1 << 3) // (RSTC) External Reset
#define AT91C_RSTC_KEY (0xFF << 24) // (RSTC) Password
// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register --------
#define AT91C_RSTC_URSTS (0x1 << 0) // (RSTC) User Reset Status
#define AT91C_RSTC_BODSTS (0x1 << 1) // (RSTC) Brownout Detection Status
#define AT91C_RSTC_RSTTYP (0x7 << 8) // (RSTC) Reset Type
#define AT91C_RSTC_RSTTYP_POWERUP (0x0 << 8) // (RSTC) Power-up Reset. VDDCORE rising.
#define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) // (RSTC) WakeUp Reset. VDDCORE rising.
#define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
#define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) // (RSTC) Software Reset. Processor reset required by the software.
#define AT91C_RSTC_RSTTYP_USER (0x4 << 8) // (RSTC) User Reset. NRST pin detected low.
#define AT91C_RSTC_RSTTYP_BROWNOUT (0x5 << 8) // (RSTC) Brownout Reset occured.
#define AT91C_RSTC_NRSTL (0x1 << 16) // (RSTC) NRST pin level
#define AT91C_RSTC_SRCMP (0x1 << 17) // (RSTC) Software Reset Command in Progress.
// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register --------
#define AT91C_RSTC_URSTEN (0x1 << 0) // (RSTC) User Reset Enable
#define AT91C_RSTC_URSTIEN (0x1 << 4) // (RSTC) User Reset Interrupt Enable
#define AT91C_RSTC_ERSTL (0xF << 8) // (RSTC) User Reset Length
#define AT91C_RSTC_BODIEN (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Real Time Timer Controller Interface
// *****************************************************************************
// *** Register offset in AT91S_RTTC structure ***
#define RTTC_RTMR ( 0) // Real-time Mode Register
#define RTTC_RTAR ( 4) // Real-time Alarm Register
#define RTTC_RTVR ( 8) // Real-time Value Register
#define RTTC_RTSR (12) // Real-time Status Register
// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register --------
#define AT91C_RTTC_RTPRES (0xFFFF << 0) // (RTTC) Real-time Timer Prescaler Value
#define AT91C_RTTC_ALMIEN (0x1 << 16) // (RTTC) Alarm Interrupt Enable
#define AT91C_RTTC_RTTINCIEN (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
#define AT91C_RTTC_RTTRST (0x1 << 18) // (RTTC) Real Time Timer Restart
// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register --------
#define AT91C_RTTC_ALMV (0x0 << 0) // (RTTC) Alarm Value
// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register --------
#define AT91C_RTTC_CRTV (0x0 << 0) // (RTTC) Current Real-time Value
// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register --------
#define AT91C_RTTC_ALMS (0x1 << 0) // (RTTC) Real-time Alarm Status
#define AT91C_RTTC_RTTINC (0x1 << 1) // (RTTC) Real-time Timer Increment
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Periodic Interval Timer Controller Interface
// *****************************************************************************
// *** Register offset in AT91S_PITC structure ***
#define PITC_PIMR ( 0) // Period Interval Mode Register
#define PITC_PISR ( 4) // Period Interval Status Register
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -