?? baojian.lst
字號:
C51 COMPILER V7.07 BAOJIAN 10/12/2007 13:39:15 PAGE 1
C51 COMPILER V7.07, COMPILATION OF MODULE BAOJIAN
OBJECT MODULE PLACED IN Baojian.OBJ
COMPILER INVOKED BY: C:\Keil\C51\BIN\C51.EXE Baojian.c BROWSE DEBUG OBJECTEXTEND
stmt level source
1 #include <intrins.h>
2 #include"stc12c2052.h"
3
4 #define heatlow P3_5
5 #define heathigh P3_7
6 #define D1 P1_0
7 #define D2 P1_1
8 #define D4 P1_3
9 #define larmlight P1_4
10 #define D3 P1_2
11 #define bell P3_4
12 #define Door P1_7
13 #define strong_key P1_5
14 #define mid_key P1_6
15 #define lack_key P3_3
16 #define on_off P3_2
17 #define uchar unsigned char
18 #define uint unsigned int
19 #define _BIN(a,b,c,d,e,f,g,h) ((a<<7)+(b<<6)+(c<<5)+(d<<4)+(e<<3)+(f<<2)+(g<<1)+(h<<0))
20 #define _bin _BIN // _bin,_BIN均可
21 #define _20S 400
22 #define _60S 1200
23 #define _6S 120
24 #define _15S 300
25 #define _2S 40
26 #define _12S 240
27 #define _30fen 36000
28 #define _7fen5 9000
29 #define _1S 20
30 #define _05S 10
31 #define _01S 2
32
33
34 //************************************************
35 //公用變量
36 ///******************************************
37 uchar mode=0x00;
38 uchar liaocheng=0x00;
39 uchar bell_style=0x00;
40 uchar time_going=0x00;
41 uchar step=0x00;
42 uint time_start=0x00;
43 uint time_count=0x0000;
44 uint time_fly=0x00;
45 uint time_fly1=0x00;
46 uint time_bell=0x00;
47 uint time_flash=0x0000;
48 bit power_flag=0;
49 //***************************************************/
50 //50ms定時器0中斷服務程序
51 /////////////////////////////////////////////////////
52 void timer0_50ms (void) interrupt 1 using 3
53 {
54 1 TH0=0xfa;
55 1 TL0=0x00;
C51 COMPILER V7.07 BAOJIAN 10/12/2007 13:39:15 PAGE 2
56 1 time_start++;
57 1 time_count++;
58 1 }
59 /***************************************************
60 //delay05S()延時程序
61 /////////////////////////////////////////////////////
62 void delay05S(void)
63 {
64 uchar i,b;
65 for(i=0x5;i>0;i--)
66 {
67 for(b=0x5;b>0;b--);
68 }
69 }
70 //***************************************************/
71 //LED_flash()定時器1中斷服務程序
72 /////////////////////////////////////////////////////
73 void timer1_LED (void) //interrupt 3 using 2
74 {
75 1 //TH1=0x00;
76 1 //TL1=0x00;
77 1 time_flash++;
78 1 switch(mode)
79 1 {
80 2 case 0x01:
81 2 {
82 3 if(time_flash>4000)
83 3 {
84 4 P3M1=_bin(1,0,1,0,1,1,0,0);//P3M1=0x0C; P3_3,P3_2//設為強輸出驅動LED
85 4 _nop_();
86 4 P1M1=_bin(1,1,1,0,0,0,0,0);//P1M1=_0x30; P1_6,P1_5//設為強輸出驅動LED
87 4 _nop_();
88 4 mid_key=lack_key=1;
89 4 _nop_();
90 4 strong_key=~strong_key;
91 4 _nop_();
92 4 time_flash=0x00;
93 4 }
94 3 break;
95 3 }
96 2 case 0x02:
97 2 {
98 3 if(time_flash>4000)
99 3 { _nop_();
100 4 P3M1=_bin(1,0,1,0,1,1,0,0);//P3M1=0x0C; P3_3,P3_2//設為強輸出驅動LED
101 4 _nop_();
102 4 P1M1=_bin(1,1,1,0,0,0,0,0);//P1M1=_0x30; P1_6,P1_5//設為強輸出驅動LED
103 4 _nop_();
104 4 strong_key=lack_key=1;
105 4 _nop_();
106 4 mid_key=~mid_key;
107 4 _nop_();
108 4 time_flash=0x00;
109 4 _nop_();
110 4 }
111 3 break;
112 3 }
113 2 case 0x03:
114 2 {
115 3 if(time_flash>4000)
116 3 { _nop_();
117 4 P3M1=_bin(1,0,1,0,1,1,0,0);//P3M1=0x0C; P3_3,P3_2//設為強輸出驅動LED
C51 COMPILER V7.07 BAOJIAN 10/12/2007 13:39:15 PAGE 3
118 4 _nop_();
119 4 P1M1=_bin(1,1,1,0,0,0,0,0);//P1M1=_0x30; P1_6,P1_5//設為強輸出驅動LED
120 4 _nop_();
121 4 mid_key=strong_key=1;
122 4 _nop_();
123 4 lack_key=~lack_key;
124 4 _nop_();
125 4 time_flash=0x00;
126 4 _nop_();
127 4 }
128 3 break;
129 3 }
130 2 default :break;
131 2 }
132 1 }
133 //***********************************************
134 //strong(); 強加熱程序
135 //***********************************************
136 void strong(void)
137 {
138 1 TR0=1;
139 1 TR1=0;
140 1 if(mode!=0x01)
141 1 {liaocheng=0x00;}
142 1 D1=D2=D3=D4=0;
143 1 bell=0;
144 1 step=0x01;
145 1 mode=0x01;
146 1 // bell_style=0x02;
147 1 }
148 //***********************************************
149 //mid(); 中加熱程序
150 //***********************************************
151 void mid(void)
152 {
153 1 TR0=1;
154 1 TR1=0;
155 1 if(mode!=0x02)
156 1 {liaocheng=0x00;}
157 1 bell=0;
158 1 D1=D2=D3=D4=0;
159 1 step=0x01;
160 1 mode=0x02;
161 1 }
162 //***********************************************
163 //lack(); 弱加熱程序
164 //***********************************************
165 void lack(void)
166 {
167 1 TR0=1;
168 1 TR1=0;
169 1 if(mode!=0x03)
170 1 {liaocheng=0x00;}
171 1 D1=D2=D3=D4=0;
172 1 bell=0;
173 1 step=0x01;
174 1 mode=0x03;
175 1 }
176 //*********************************************
177 //alarm();
178 //*********************************************
179 void alarm(void)
C51 COMPILER V7.07 BAOJIAN 10/12/2007 13:39:15 PAGE 4
180 {
181 1
182 1 if(time_count>_7fen5)
183 1 {
184 2
185 2 if(D4==0)
186 2 {
187 3 D4=1;time_count=0x00;
188 3 }
189 2 else if(D3==0)
190 2 {
191 3 D3=1;time_count=0x00;
192 3 }
193 2 else if(D2==0)
194 2 {
195 3 D2=1;time_count=0x00;
196 3 }
197 2 else if(D1==0)
198 2 {
199 3 D1=1;
200 3 time_count=0x00;
201 3 // larmlight=0;
202 3 //TR0=0;
203 3 TR1=1;
204 3 liaocheng++;
205 3 bell_style=0x01;
206 3 }
207 2 if((D1==1)&(liaocheng<3))
208 2 {
209 3 mode=0x00;
210 3 P3M1=_bin(1,0,1,0,1,1,0,0);
211 3 P3M0=_bin(0,0,0,0,0,0,0,0);
212 3 P1M1=_bin(1,1,1,0,0,0,0,0);
213 3 P1M0=_bin(1,0,0,0,0,0,0,0);
214 3 _nop_();
215 3 strong_key=mid_key=lack_key=1;
216 3 heathigh=0;
217 3 if((time_count>_60S)&(liaocheng<3))
218 3 {
219 4 TR1=0;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -