USHORT            LanguageId,
    PVOID             pvOutputBuffer,
    ULONG             ulLength
    );

NTSTATUS
Ezusb_VendorRequest2(
   IN PDEVICE_OBJECT DeviceObject,
   IN PIRP Irp
   );


NTSTATUS
ForwardAndWait(
   IN PDEVICE_OBJECT DeviceObject,
   IN PIRP Irp
   );


NTSTATUS
Ezusb_DefaultPnpHandler(
   IN PDEVICE_OBJECT fdo,
   IN PIRP Irp
   );


NTSTATUS
Ezusb_DispatchPnp(
   IN PDEVICE_OBJECT DeviceObject,
   IN PIRP           Irp
   );

NTSTATUS
Ezusb_DispatchPower(
    IN PDEVICE_OBJECT DeviceObject,
    IN PIRP           Irp
    );

NTSTATUS
Ezusb_HandleStartDevice(
   IN PDEVICE_OBJECT DeviceObject,
   IN PIRP Irp
   );

NTSTATUS
Ezusb_HandleRemoveDevice(
   IN PDEVICE_OBJECT fdo,
   IN PIRP Irp
   );

NTSTATUS 
OnRequestComplete(
   IN PDEVICE_OBJECT DeviceObject,
   IN PIRP Irp,
   IN PKEVENT pev
   );

NTSTATUS
CompleteRequest(
   IN PIRP Irp,
   IN NTSTATUS status,
   IN ULONG info
   );

BOOLEAN LockDevice(
   IN PDEVICE_OBJECT fdo
   );

void UnlockDevice(
   PDEVICE_OBJECT fdo
   );


NTSTATUS InitTransferObject(
   IN OUT PISO_STREAM_OBJECT streamObject,
   IN ULONG index
   );

NTSTATUS Ezusb_StartIsoTransfer(
   IN PDEVICE_OBJECT fdo,
   IN PIRP Irp
   );

NTSTATUS IsoTransferComplete(
   IN PDEVICE_OBJECT fdo,
   IN PIRP Irp,
   IN PVOID Context
   );


NTSTATUS Ezusb_AnchorDownload(
   PDEVICE_OBJECT fdo,
   WORD offset,
   PUCHAR downloadBuffer,
   ULONG downloadSize
   );

NTSTATUS Ezusb_DownloadIntelHex(
   PDEVICE_OBJECT fdo,
   PINTEL_HEX_RECORD hexRecord
   );

NTSTATUS Ezusb_8051Reset(
   PDEVICE_OBJECT fdo,
   UCHAR resetBit
   );

NTSTATUS Ezusb_StartIsoStream(
   IN PDEVICE_OBJECT fdo,
   IN PIRP Irp
   );

#endif      //DRIVER section


///////////////////////////////////////////////////////
//
//              IOCTL Definitions
//
// User mode applications wishing to send IOCTLs to a kernel mode driver
// must use this file to set up the correct type of IOCTL code permissions.
//
// Note: this file depends on the file DEVIOCTL.H which contains the macro
// definition for "CTL_CODE" below.  Include that file before  you include
// this one in your source code.
//
///////////////////////////////////////////////////////

//
// Set the base of the IOCTL control codes.  This is somewhat of an
// arbitrary base number, so you can change this if you want unique
// IOCTL codes.  You should consult the Windows NT DDK for valid ranges
// of IOCTL index codes before you choose a base index number.
//

#define Ezusb_IOCTL_INDEX  0x0800


#define IOCTL_Ezusb_GET_PIPE_INFO     CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+0,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_GET_DEVICE_DESCRIPTOR CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+1,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_GET_CONFIGURATION_DESCRIPTOR CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+2,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_BULK_OR_INTERRUPT_WRITE     CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+3,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_BULK_OR_INTERRUPT_READ      CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+4,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_VENDOR_REQUEST              CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+5,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_GET_CURRENT_CONFIG          CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+6,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_ANCHOR_DOWNLOAD             CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+7,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_RESET  CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+12,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_RESETPIPE  CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+13,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_ABORTPIPE  CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+15,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_SETINTERFACE  CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+16,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_Ezusb_GET_STRING_DESCRIPTOR CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+17,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)


//
// Perform an IN transfer over the specified bulk or interrupt pipe.
//
// lpInBuffer: BULK_TRANSFER_CONTROL stucture specifying the pipe number to read from
// nInBufferSize: sizeof(BULK_TRANSFER_CONTROL)
// lpOutBuffer: Buffer to hold data read from the device.  
// nOutputBufferSize: size of lpOutBuffer.  This parameter determines
//    the size of the USB transfer.
// lpBytesReturned: actual number of bytes read
// 
#define IOCTL_EZUSB_BULK_READ             CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+19,\
                                                   METHOD_OUT_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// Perform an OUT transfer over the specified bulk or interrupt pipe.
//
// lpInBuffer: BULK_TRANSFER_CONTROL stucture specifying the pipe number to write to
// nInBufferSize: sizeof(BULK_TRANSFER_CONTROL)
// lpOutBuffer: Buffer of data to write to the device
// nOutputBufferSize: size of lpOutBuffer.  This parameter determines
//    the size of the USB transfer.
// lpBytesReturned: actual number of bytes written
// 
#define IOCTL_EZUSB_BULK_WRITE            CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+20,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// The following IOCTL's are defined as using METHOD_DIRECT_IN buffering.
// This means that the output buffer is directly mapped into system
// space and probed for read access by the driver.  This means that it is
// brought into memory if it happens to be paged out to disk.  Even though
// the buffer is only probed for read access, it is safe (probably) to
// write to it as well.  This read/write capability is used for the loopback
// IOCTL's
// 

// TODO Insert Loopback IOCTL's

//
// Retrieve the current USB frame number from the Host Controller
//
// lpInBuffer: NULL
// nInBufferSize: 0
// lpOutBuffer: PULONG to hold current frame number
// nOutputBufferSize: sizeof(PULONG)
// 
#define IOCTL_EZUSB_GET_CURRENT_FRAME_NUMBER  CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+21,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)


//
// Performs a vendor or class specific control transfer to EP0.  The contents of
// the input parameter determine the type of request.  See the USB spec
// for more information on class and vendor control transfers.
//
// lpInBuffer: PVENDOR_OR_CLASS_REQUEST_CONTROL
// nInBufferSize: sizeof(VENDOR_OR_CLASS_REQUEST_CONTROL)
// lpOutBuffer: pointer to a buffer if the request involves a data transfer
// nOutputBufferSize: size of the transfer buffer (corresponds to the wLength
//    field of the USB setup packet)
// 
#define IOCTL_EZUSB_VENDOR_OR_CLASS_REQUEST   CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+22,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// Retrieves the actual USBD_STATUS code for the most recently failed
// URB.
//
// lpInBuffer: NULL
// nInBufferSize: 0
// lpOutBuffer: PULONG to hold the URB status
// nOutputBufferSize: sizeof(ULONG)
// 

#define IOCTL_EZUSB_GET_LAST_ERROR   CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+23,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

//
// Reads from the specified ISO endpoint. (USB IN Transfer)
//
// lpInBuffer: ISO_TRANSFER_CONTROL
// nInBufferSize: sizeof(ISO_TRANSFER_CONTROL)
// lpOutBuffer: buffer to hold data read from the device
// nOutputBufferSize: size of the read buffer.
//
// 
// 

#define IOCTL_EZUSB_ISO_READ          CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+25,\
                                                   METHOD_OUT_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// Writes to the specified ISO endpoint. (USB OUT Transfer)
//
// lpInBuffer: ISO_TRANSFER_CONTROL
// nInBufferSize: sizeof(ISO_TRANSFER_CONTROL)
// lpOutBuffer: buffer to hold data to write to the device
// nOutputBufferSize: size of the write buffer.
//
// 
// 

#define IOCTL_EZUSB_ISO_WRITE          CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+26,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// Performs and Anchor Download.
//
// lpInBuffer: PANCHOR_DOWNLOAD_CONTROL
// nInBufferSize: sizeof(ANCHOR_DOWNLOAD_CONTROL)
// lpOutBuffer: pointer to a buffer of data to download to the device
// nOutputBufferSize: size of the transfer buffer
// 
#define IOCTL_EZUSB_ANCHOR_DOWNLOAD   CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+27,\
                                                   METHOD_IN_DIRECT,  \
                                                   FILE_ANY_ACCESS)

//
// Returns driver version information
//
// lpInBuffer: NULL
// nInBufferSize: 0
// lpOutBuffer: PEZUSB_DRIVER_VERSION
// nOutputBufferSize: sizeof(EZUSB_DRIVER_VERSION)
// 
#define IOCTL_EZUSB_GET_DRIVER_VERSION   CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+29,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_EZUSB_START_ISO_STREAM     CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+30,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_EZUSB_STOP_ISO_STREAM     CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+31,\
                                                   METHOD_BUFFERED,  \
                                                   FILE_ANY_ACCESS)

#define IOCTL_EZUSB_READ_ISO_BUFFER     CTL_CODE(FILE_DEVICE_UNKNOWN,  \
                                                   Ezusb_IOCTL_INDEX+32,\
                                                   METHOD_OUT_DIRECT,  \
                                                   FILE_ANY_ACCESS)