#ifndef MXC_SETUP_MXC91131_H#define MXC_SETUP_MXC91131_H/* *      File :     mxc_setup_mxc91131.h * *      Platform specific code for MXC91131  platform. * *///=============================================================================//####ECOSGPLCOPYRIGHTBEGIN####// -------------------------------------------// This file is part of eCos, the Embedded Configurable Operating System.// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.//// eCos is free software; you can redistribute it and/or modify it under// the terms of the GNU General Public License as published by the Free// Software Foundation; either version 2 or (at your option) any later version.//// eCos is distributed in the hope that it will be useful, but WITHOUT ANY// WARRANTY; without even the implied warranty of MERCHANTABILITY or// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License// for more details.//// You should have received a copy of the GNU General Public License along// with eCos; if not, write to the Free Software Foundation, Inc.,// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.//// As a special exception, if other files instantiate templates or use macros// or inline functions from this file, or you compile this file and link it// with other works to produce a work based on this file, this file does not// by itself cause the resulting work to be covered by the GNU General Public// License. However the source code for this file must still be made available// in accordance with section (3) of the GNU General Public License.//// This exception does not invalidate any other reasons why a work based on// this file might be covered by the GNU General Public License.//// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.// at http://sources.redhat.com/ecos/ecos-license/// -------------------------------------------//####ECOSGPLCOPYRIGHTEND####//===========================================================================//definitions form redboot\cvs\src\packages\hal\arm\mxc91131\var\current\include\hal_mxc91131.h#ifdef __ASSEMBLER__#define REG8_VAL(a)      (a)#define REG16_VAL(a)     (a)#define REG32_VAL(a)     (a)#define REG8_PTR(a)      (a)#define REG16_PTR(a)     (a)#define REG32_PTR(a)     (a)#else /* __ASSEMBLER__ *///extern char HAL_PLATFORM_EXTRA[];#define REG8_VAL(a)      ((unsigned char)(a))#define REG16_VAL(a)     ((unsigned short)(a))#define REG32_VAL(a)     ((unsigned int)(a))#define REG8_PTR(a)      ((volatile unsigned char *)(a))#define REG16_PTR(a)     ((volatile unsigned short *)(a))#define REG32_PTR(a)     ((volatile unsigned long *)(a))#define REG32_SET(addr, val)    (*(volatile unsigned long*) (addr) = (val))#define REG16_SET(addr, val)    (*(volatile unsigned short*) (addr) = (val))#define readb(a)             (*(volatile unsigned char *)(a))#define readw(a)             (*(volatile unsigned short *)(a))#define readl(a)             (*(volatile unsigned int *)(a))#define writeb(v,a)          (*(volatile unsigned char *)(a) = (v))#define writew(v,a)          (*(volatile unsigned short *)(a) = (v))#define writel(v,a)          (*(volatile unsigned int *)(a) = (v))#endif /* __ASSEMBLER__ *//* * MXC91131 Default Memory Layout Definitions */#define     L2CC_BASE_ADDR          0x30000000/* * AIPS 1 */#define     AIPS1_BASE_ADDR         0x43F00000#define     AIPS1_CTRL_BASE_ADDR    AIPS1_BASE_ADDR#define     MAX_BASE_ADDR           0x43F04000#define     EVTMON_BASE_ADDR        0x43F08000#define     CLKCTL_BASE_ADDR        0x43F0C000#define     ETB_SLOT4_BASE_ADDR     0x43F10000#define     ETB_SLOT5_BASE_ADDR     0x43F14000#define     ECT_CTIO_BASE_ADDR      0x43F18000#define     I2C_BASE_ADDR           0x43F80000#define     MU_BASE_ADDR            0x43F88000#define     UART1_BASE_ADDR         0x43F90000#define     UART2_BASE_ADDR         0x43F94000#define     DSM_BASE_ADDR           0x43F98000#define     OWIRE_BASE_ADDR         0x43F9C000#define     SSI1_BASE_ADDR          0x43FA0000#define     CSPI1_BASE_ADDR         0x43FA4000#define     KPP_BASE_ADDR           0x43FA8000#define     IOMUX_AP_BASE_ADDR      0x43FAC000#define     GPIO3_BASE_ADDR         0x43FB0000#define     CTI_AP_BASE_ADDR        0x43FB8000/* * SPBA */#define     SPBA_BASE_ADDR          0x50000000#define     SDHC1_BASE_ADDR         0x50004000#define     SDHC2_BASE_ADDR         0x50008000#define     UART3_BASE_ADDR         0x5000C000#define     CSPI2_BASE_ADDR         0x50010000#define     SSI2_BASE_ADDR          0x50014000#define     SIM_BASE_ADDR           0x50018000#define     IIM_BASE_ADDR           0x5001C000#define     CTI_SDMA_BASE_ADDR      0x50020000#define     USBOTG_BASE_ADDR        0x50024000#define     SPBA_CTRL_BASE_ADDR     0x5003C000#define     IOMUX_COM_BASE_ADDR     0x50040000#define     CRM_COM_BASE_ADDR       0x50044000#define     MRCG_BASE_ADDR          0x50048000#define     UDPLL_BASE_ADDR         0x5004C000#define     ADPLL_BASE_ADDR         0x50050000#define     BDPLL_BASE_ADDR         0x50054000#define     CRM_AP_BASE_ADDR        0x50058000/* * AIPS 2 */#define     AIPS2_BASE_ADDR         0x53F00000#define     AIPS2_CTRL_BASE_ADDR    AIPS2_BASE_ADDR#define     FIRI_BASE_ADDR          0x53F8C000#define     GPT_BASE_ADDR           0x53F90000#define     EPIT1_BASE_ADDR         0x53F94000#define     EPIT2_BASE_ADDR         0x53F98000#define     SCC_BASE_ADDR           0x53FAC000#define     RNGA_BASE_ADDR          0x53FB0000#define     IPU_CTRL_BASE_ADDR      0x53FC0000#define     AUDMUX_BASE_ADDR        0x53FC4000#define     EDIO_BASE_ADDR          0x53FC8000#define     GPIO1_BASE_ADDR         0x53FCC000#define     GPIO2_BASE_ADDR         0x53FD0000#define     SDMA_BASE_ADDR          0x53FD4000#define     RTC_BASE_ADDR           0x53FD8000#define     WDOG1_BASE_ADDR          0x53FDC000#define     PWM_BASE_ADDR           0x53FE0000#define     HAC_BASE_ADDR           0x53FEC000/* * ROMPATCH and AVIC */#define     ROMPATCH_BASE_ADDR      0x60000000#define     AVIC_BASE_ADDR          0x68000000/* * NAND, SDRAM, WEIM, M3IF, EMI controllers */#define     EXT_MEM_CTRL_BASE       0xB8000000#define     NFC_BASE                EXT_MEM_CTRL_BASE#define     ESDCTL_BASE             0xB8001000#define     WEIM_BASE_ADDR          0xB8002000#define     WEIM_CTRL_CS0           WEIM_BASE_ADDR#define     WEIM_CTRL_CS1           (WEIM_BASE_ADDR + 0x10)#define     WEIM_CTRL_CS2           (WEIM_BASE_ADDR + 0x20)#define     WEIM_CTRL_CS3           (WEIM_BASE_ADDR + 0x30)#define     WEIM_CTRL_CS4           (WEIM_BASE_ADDR + 0x40)#define     M3IF_BASE               0xB8003000#define     PCMCIA_CTL_BASE         0xB8004000/* * Memory regions and CS */#define     IPU_MEM_BASE_ADDR       0x70000000#define     CSD0_BASE_ADDR          0x80000000#define     CSD1_BASE_ADDR          0x90000000#define     CS0_BASE_ADDR           0xA0000000#define     CS1_BASE_ADDR           0xA8000000#define     CS2_BASE_ADDR           0xB0000000#define     CS3_BASE_ADDR           0xB2000000#define     CS4_BASE_ADDR           0xB4000000#define     CS4_BASE_PSRAM          0xB5000000#define     CS5_BASE_ADDR           0xB6000000#define INTERNAL_ROM_VA         0xF0000000// SDRAM#define     RAM_BANK0_BASE          SDRAM_BASE_ADDR/* * IRQ Controller Register Definitions. */#define     AVIC_NIMASK             REG32_PTR(AVIC_BASE_ADDR + (0x04))#define     AVIC_INTTYPEH           REG32_PTR(AVIC_BASE_ADDR + (0x18))#define     AVIC_INTTYPEL           REG32_PTR(AVIC_BASE_ADDR + (0x1C))/* L210 */#define     L2CC_BASE_ADDR                  0x30000000#define     L2_CACHE_LINE_SIZE              32#define     L2_CACHE_CTL_REG                0x100#define     L2_CACHE_AUX_CTL_REG            0x104#define     L2_CACHE_SYNC_REG               0x730#define     L2_CACHE_INV_LINE_REG           0x770#define     L2_CACHE_INV_WAY_REG            0x77C#define     L2_CACHE_CLEAN_LINE_REG         0x7B0#define     L2_CACHE_CLEAN_INV_LINE_REG     0x7F0/* CRM_AP */#define     CRM_AP_ASCSR            0x00#define     CRM_AP_ACDR             0x04#define     CRM_AP_ACDER1           0x08#define     CRM_AP_ACDER2           0x0C#define     CRM_AP_ACGCR            0x10#define     CRM_AP_ACCGCR           0x14#define     CRM_AP_AMLPMRA          0x18#define     CRM_AP_AMLPMRB          0x1C#define     CRM_AP_AMLPMRC          0x20#define     CRM_AP_AMLPMRD          0x24#define     CRM_AP_AMLPMRE1         0x28#define     CRM_AP_AMLPMRE2         0x2C#define     CRM_AP_AMLPMRF          0x30#define     CRM_AP_AMLPMRG          0x34#define     CRM_AP_APGCR            0x38#define     CRM_AP_ACSR             0x3C#define     CRM_AP_ADCR             0x40#define     CRM_AP_ACR              0x44#define     CRM_AP_AMCR             0x48#define     CRM_AP_APCR             0x4C#define     CRM_AP_AMORA            0x50#define     CRM_AP_AMORB            0x54#define     CRM_AP_AGPR             0x58#define     CRM_AP_APRA             0x5C#define     CRM_AP_APRB             0x60#define     CRM_AP_APOR             0x64/* CRM_COM */#define     CRM_COM_CBMR            0x00#define     CRM_COM_CRSRBP          0x04#define     CRM_COM_CCRCR           0x08#define     CRM_COM_CSCR            0x0C#define     CRM_COM_CCCR            0x10#define     CRM_COM_CRSRAP          0x14/* DPLL */#define     DPLL_DP_CTL             0x00#define     DPLL_DP_CONFIG          0x04#define     DPLL_DP_OP              0x08#define     DPLL_DP_MFD             0x0C#define     DPLL_DP_MFN             0x10#define     DPLL_DP_MFNMINUS        0x14#define     DPLL_DP_MFNPLUS         0x18#define     DPLL_DP_HFS_OP          0x1C#define     DPLL_DP_HFS_MFD         0x20#define     DPLL_DP_HFS_MFN         0x24#define     DPLL_DP_TOGC            0x28#define     DPLL_DP_DESTAT          0x2C/* WEIM - CS0 */#define     CSCRU                   0x00#define     CSCRL                   0x04#define     CSCRA                   0x08/* ESDCTL */#define     ESDCTL_ESDCTL0          0x00#define     ESDCTL_ESDCFG0          0x04#define     ESDCTL_ESDCTL1          0x08#define     ESDCTL_ESDCFG1          0x0C#define     ESDCTL_ESDMISC          0x10/* ESDRAM parameters *//* TODO: update required based on AP's team */#define     SDRAM_CSD0              0x00#define     PRE_ALL_CMD             0x01#define     AUTO_REF_CMD            0x10#define     SET_MODE_REG_CMD        0x11#define     MODE_REG_VAL0           0x00#define     NORMAL_MODE             0x00/* * UART Control Register 0 Bit Fields. */#define         EUartUCR1_ADEN      (1 << 15)     // Auto dectect interrupt#define         EUartUCR1_ADBR      (1 << 14)    // Auto detect baud rate#define         EUartUCR1_TRDYEN    (1 << 13)     // Transmitter ready interrupt enable#define         EUartUCR1_IDEN      (1 << 12)     // Idle condition interrupt#define         EUartUCR1_RRDYEN    (1 << 9)    // Recv ready interrupt enable#define         EUartUCR1_RDMAEN    (1 << 8)    // Recv ready DMA enable#define         EUartUCR1_IREN      (1 << 7)    // Infrared interface enable#define         EUartUCR1_TXMPTYEN  (1 << 6)    // Transimitter empty interrupt enable#define         EUartUCR1_RTSDEN    (1 << 5)    // RTS delta interrupt enable#define         EUartUCR1_SNDBRK    (1 << 4)    // Send break#define         EUartUCR1_TDMAEN    (1 << 3)    // Transmitter ready DMA enable#define         EUartUCR1_DOZE      (1 << 1)    // Doze#define         EUartUCR1_UARTEN    (1 << 0)    // UART enabled#define         EUartUCR2_ESCI      (1 << 15)     // Escape seq interrupt enable#define         EUartUCR2_IRTS      (1 << 14)     // Ignore RTS pin#define         EUartUCR2_CTSC      (1 << 13)     // CTS pin control#define         EUartUCR2_CTS       (1 << 12)     // Clear to send#define         EUartUCR2_ESCEN     (1 << 11)     // Escape enable#define         EUartUCR2_PREN      (1 << 8)    // Parity enable#define         EUartUCR2_PROE      (1 << 7)    // Parity odd/even#define         EUartUCR2_STPB      (1 << 6)    // Stop#define         EUartUCR2_WS        (1 << 5)    // Word size#define         EUartUCR2_RTSEN     (1 << 4)    // Request to send interrupt enable#define         EUartUCR2_ATEN      (1 << 3)    // Aging timer enable#define         EUartUCR2_TXEN      (1 << 2)    // Transmitter enabled#define         EUartUCR2_RXEN      (1 << 1)    // Receiver enabled#define         EUartUCR2_SRST_     (1 << 0)    // SW reset#define         EUartUCR3_PARERREN  (1 << 12)    // Parity enable#define         EUartUCR3_FRAERREN  (1 << 11)    // Frame error interrupt enable#define         EUartUCR3_ADNIMP    (1 << 7)    // Autobaud detection not improved#define         EUartUCR3_RXDSEN    (1 << 6)    // Receive status interrupt enable#define         EUartUCR3_AIRINTEN  (1 << 5)    // Async IR wake interrupt enable#define         EUartUCR3_AWAKEN    (1 << 4)    // Async wake interrupt enable#define         EUartUCR3_RXDMUXSEL (1 << 2)    // RXD muxed input selected#define         EUartUCR3_INVT      (1 << 1)    // Inverted Infrared transmission#define         EUartUCR3_ACIEN     (1 << 0)    // Autobaud counter interrupt enable#define         EUartUCR4_CTSTL_32  (32 << 10)    // CTS trigger level (32 chars)#define         EUartUCR4_INVR      (1 << 9)     // Inverted infrared reception#define         EUartUCR4_ENIRI     (1 << 8)    // Serial infrared interrupt enable#define         EUartUCR4_WKEN      (1 << 7)     // Wake interrupt enable#define         EUartUCR4_IRSC      (1 << 5)     // IR special case#define         EUartUCR4_LPBYP     (1 << 4)      // Low power bypass#define         EUartUCR4_TCEN      (1 << 3)     // Transmit complete interrupt enable#define         EUartUCR4_BKEN      (1 << 2)     // Break condition interrupt enable#define         EUartUCR4_OREN      (1 << 1)     // Receiver overrun interrupt enable#define         EUartUCR4_DREN      (1 << 0)     // Recv data ready interrupt enable#define         EUartUFCR_RXTL_SHF  0             // Receiver trigger level shift#define         EUartUFCR_RFDIV_1   (5 << 7)     // Reference freq divider (div 1)#define         EUartUFCR_RFDIV_2   (4 << 7)     // Reference freq divider (div 2)#define         EUartUFCR_TXTL_SHF  10             // Transmitter trigger level shift#define         EUartUSR1_PARITYERR (1 << 15)     // Parity error interrupt flag#define         EUartUSR1_RTSS      (1 << 14)     // RTS pin status#define         EUartUSR1_TRDY      (1 << 13)     // Transmitter ready interrupt/dma flag#define         EUartUSR1_RTSD      (1 << 12)     // RTS delta#define         EUartUSR1_ESCF      (1 << 11)     // Escape seq interrupt flag#define         EUartUSR1_FRAMERR   (1 << 10)     // Frame error interrupt flag#define         EUartUSR1_RRDY      (1 << 9)     // Receiver ready interrupt/dma flag#define         EUartUSR1_AGTIM     (1 << 8)     // Aging timeout interrupt status#define         EUartUSR1_RXDS      (1 << 6)     // Receiver idle interrupt flag#define         EUartUSR1_AIRINT    (1 << 5)     // Async IR wake interrupt flag#define         EUartUSR1_AWAKE     (1 << 4)     // Aysnc wake interrupt flag#define         EUartUSR2_ADET      (1 << 15)     // Auto baud rate detect complete#define         EUartUSR2_TXFE      (1 << 14)     // Transmit buffer FIFO empty#define         EUartUSR2_IDLE      (1 << 12)     // Idle condition#define         EUartUSR2_ACST      (1 << 11)     // Autobaud counter stopped#define         EUartUSR2_IRINT     (1 << 8)     // Serial infrared interrupt flag#define         EUartUSR2_WAKE      (1 << 7)     // Wake#define         EUartUSR2_RTSF      (1 << 4)     // RTS edge interrupt flag#define         EUartUSR2_TXDC      (1 << 3)     // Transmitter complete#define         EUartUSR2_BRCD      (1 << 2)     // Break condition#define         EUartUSR2_ORE       (1 << 1)     // Overrun error#define         EUartUSR2_RDR       (1 << 0)     // Recv data ready#define         EUartUTS_FRCPERR    (1 << 13)     // Force parity error#define         EUartUTS_LOOP       (1 << 12)     // Loop tx and rx#define         EUartUTS_TXEMPTY    (1 << 6)     // TxFIFO empty#define         EUartUTS_RXEMPTY    (1 << 5)     // RxFIFO empty#define         EUartUTS_TXFULL     (1 << 4)     // TxFIFO full#define         EUartUTS_RXFULL     (1 << 3)     // RxFIFO full#define         EUartUTS_SOFTRST    (1 << 0)     // Software reset#define         DelayTimerPresVal   3#define         NFC_CLK_SWITCH      0/* DPLL */#define         PLL_DP_CTL          0x00#define         PLL_DP_CONFIG       0x04#define         PLL_DP_OP           0x08#define         PLL_DP_MFD          0x0C#define         PLL_DP_MFN          0x10#define         PLL_DP_HFS_OP       0x1C#define         PLL_DP_HFS_MFD      0x20