/* * ARMIO.H  * * Control diagnostic bits * * Reference : GCS207 * */#include "chipset.cfg"#include "l1sw.cfg"#include "board.cfg"#include "sys_types.h"// Duplicate address with ARMIO_IO_CNTL// Need to investigate !!!//#define ARMIO_CNTL      (MEM_ARMIO + 0x04) /* I/O control */#define ARMIO_IN        (MEM_ARMIO + 0x00) /* inputs */#define ARMIO_OUT       (MEM_ARMIO + 0x02) /* outputs */#define ARMIO_IO_CNTL   (MEM_ARMIO + 0x04) /* I/O control */#define ARMIO_CNTL_REG  (MEM_ARMIO + 0x06) /* control ARMIO */#define ARMIO_LOAD_TIM  (MEM_ARMIO + 0x08) /* load TIM */#if (CHIPSET != 12)  #define ARMIO_KBR_IN    (MEM_ARMIO + 0x0A) /* KBR inputs (rows) */  #define ARMIO_KBR_OUT   (MEM_ARMIO + 0x0C) /* KBR outputs (columns) */#endif#define ARMIO_PWM_CNTL  (MEM_ARMIO + 0x0E) /* LIGHT/BUZZER control */#define ARMIO_LIGHT     (MEM_ARMIO + 0x10) /* light value */#define ARMIO_BUZZER    (MEM_ARMIO + 0x12) /* buzzer value */#define ARMIO_CLOCKEN   0x0020#if (CHIPSET != 12)  #define CLKM_IO_CNTL    MEM_IO_SEL         /* control IO */#endif#if (CHIPSET == 12)  #define GPIO_INTERRUPT_LEVEL_REG  * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x16)  #define GPIO_INTERRUPT_MASK_REG   * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x18)#else  #define ARMIO_GPIO_EVENT_MODE (MEM_ARMIO + 0x14) /* GPIO event mode */  #define ARMIO_KBD_GPIO_INT    (MEM_ARMIO + 0x16) /* Kbd/GPIO IRQ register */  #define ARMIO_KBD_GPIO_MASKIT (MEM_ARMIO + 0x18) /* Kbd/GPIO mask IRQ */#endif#if (CHIPSET != 12)  #define ARMIO_DCD (2) /* IO used for DCD on C-Sample - Output */#endif#define ARMIO_DTR (3) /* IO used for DTR on C-Sample - Input */#define ARMIO_FALLING_EDGE (0)#define ARMIO_RISING_EDGE  (1)#if (CHIPSET != 12)  #define ARMIO_KEYPDAD_INT (0x0001)  #define ARMIO_GPIO_INT    (0x0002)  #define ARMIO_MASKIT_KBD  (0x0001)  #define ARMIO_MASKIT_GPIO (0x0002)  void AI_EnableBit(int bit);  void AI_DisableBit(int bit);#endifvoid AI_SetBit(int bit);void AI_ResetBit(int bit);void AI_ConfigBitAsOutput(int bit);void AI_ConfigBitAsInput(int bit);SYS_BOOL AI_ReadBit(int bit);void AI_SetSimIO3V(SYS_UWORD8 StdOutput);#if (OP_L1_STANDALONE == 0)  void AI_Power(SYS_UWORD8 power);#endifvoid AI_ResetTspIO(void);void AI_ResetDbgReg(void);void AI_ResetIoConfig(void);void AI_InitIOConfig(void);void AI_ClockEnable (void);void AI_SelectIOForIT (SYS_UWORD16 Pin, SYS_UWORD16 Edge);#if (CHIPSET != 12)  int  AI_CheckITSource (SYS_UWORD16 Source);#endifvoid AI_InitIOConfig_c1500(void);void AI_Keypad_Light(SYS_UWORD8 open);#if (CCDH_SENSOR == 1)void ov7660_chipInit(void);void ov7660_ChipReset(void);void ov7660_powerOff(void);void camera_wait_href(void);#endifvoid AI_UnmaskIT (SYS_UWORD16 Source);void AI_MaskIT (SYS_UWORD16 Source);