?? aumg369xb readme.html
字號:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>aumg369xb Instrument Driver Readme</title>
</head>
<body>
<h2> aumg369xb Instrument Driver Readme</h2>
<para>To rate this instrument driver, go to the driver download page on the <a
href="http://www.ni.com/idnet">Instrument Driver Network</a>.</para>
<h4>1. Overview</h4>
<para>
Instrument Driver Technology: LabWindows/CVI Plug and Play
<br>
Manufacturer: Anritsu
<br>
Supported Language(s): LabWindows/CVI, Measurement Studio for Visual Studio, Visual Studio
<br>
Supported Model(s): MG3691B, MG3692B, MG3693B, MG3694B, MG3695B, MG3696B
<br>
Model(s) Tested: MG3694B
<br>
Interface(s): GPIB
<br>
Firmware Revision(s) Tested: 3.41
<br>
<br>
Certified: Yes
<br>
NI Supported: Yes
<br>
Source Code Available: Yes
<br>
<br>
Driver Revision: 1.0
<br>
Original Release Date: 11/02/2007
<br>
Current Revision Date: 11/02/2007
</para>
<h4>2. Required Software</h4>
<para>Some software components need to be installed before using this
instrument driver. <br>The minimum versions of these components are listed
below, and can be downloaded from the Download Site.
<br>
<br>
NI-VISA 4.0 or later
<br>
<h4>3. Known Issues</h4>
<para>
To report issues or provide feedback about this instrument driver,
please send an email to <a href="mailto:instrument.drivers@ni.com">instrument.drivers@ni.com</a>.</para>
<br>
<br>
<para>
1. A user is able to select one of the preset power level sweep range parameters (L1-L2, L3-L4, L5-L6, L7-L8 or L9-L0) on the front panel of the instrument. However, there is no corresponding GPIB command. The only way to change the sweep range is setting the L1 and L2 parameters via remote control.
</para>
<br>
<br>
<para>
2. A user is able to set the VNA Level on the front panel of the instrument. However, there is no corresponding GPIB command to set this parameter.
</para>
<h4>4. Revision History</h4>
<para>The latest version of this and other LabVIEW and LabWindows/CVI
instrument drivers can be downloaded at the <a href="http://www.ni.com/idnet">Instrument Driver Network</a>.<br>
<br>
REV 1.0, 11/02/2007<br></para>
Modified by: Xiangchao Xie<br>
<para> Original release.<br>
<br>
</para>
</body>
</html>
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -