::= { bgpPeerEntry 13 }        bgpPeerConfederationMember OBJECT-TYPE            SYNTAX      TruthValue            MAX-ACCESS  read-only            STATUS      current            DESCRIPTION        "This value indicates whether the given peer is in our         confederation or not."        REFERENCE        "RFC 3065 - BGP Confederations"            ::= { bgpPeerEntry 14 }        bgpPeerInUpdates OBJECT-TYPE            SYNTAX     Counter32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The number of BGP UPDATE messages         received on this connection.  This object         should be initialized to zero (0) when the         connection is established."            ::= { bgpPeerEntry 15 }        bgpPeerOutUpdates OBJECT-TYPE            SYNTAX     Counter32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The number of BGP UPDATE messages         transmitted on this connection.  This         object should be initialized to zero (0)        when the connection is established."            ::= { bgpPeerEntry 16 }Various Authors      Expires July  13, 2002             [Page 14]Internet Draft              BGP-MIB v2              July 13, 2001        bgpPeerInTotalMessages OBJECT-TYPE            SYNTAX     Counter32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The total number of messages received         from the remote peer on this connection.        This object should be initialized to zero        when the connection is established."            ::= { bgpPeerEntry 17 }    bgpPeerOutTotalMessages OBJECT-TYPE            SYNTAX     Counter32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The total number of messages transmitted to        the remote peer on this connection.  This         object should be initialized to zero when         the connection is established."            ::= { bgpPeerEntry 18 }        bgpPeerLastError OBJECT-TYPE            SYNTAX     OCTET STRING (SIZE (2))            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The last error code and subcode seen by this        peer on this connection.  If no error has        occurred, this field is zero.  Otherwise, the        first byte of this two byte OCTET STRING        contains the error code, and the second byte        contains the subcode."            ::= { bgpPeerEntry 19 }        bgpPeerFsmEstablishedTransitions OBJECT-TYPE            SYNTAX     Counter32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "The total number of times the BGP FSM        transitioned into the established state        for this peer."            ::= { bgpPeerEntry 20 }        										Various Authors      Expires July  13, 2002             [Page 15]Internet Draft              BGP-MIB v2              July 13, 2001				bgpPeerFsmEstablishedTime OBJECT-TYPE            SYNTAX     Gauge32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "This timer indicates how long (in         seconds) this peer has been in the         Established state or how long        since this peer was last in the         Established state.  It is set to zero when         a new peer is configured or the router is         booted."            ::= { bgpPeerEntry 21 }        bgpPeerConnectRetryInterval OBJECT-TYPE            SYNTAX     Integer32 (1..65535)            MAX-ACCESS read-write            STATUS     current            DESCRIPTION        "Time interval in seconds for the         ConnectRetry timer.  The suggested value         for this timer is 120 seconds."            ::= { bgpPeerEntry 22 }        bgpPeerHoldTime OBJECT-TYPE            SYNTAX     Integer32  ( 0 | 3..65535 )            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "Time interval in seconds for the Hold         Timer established with the peer.  The         value of this object is calculated by this         BGP speaker by using the smaller of the         value in bgpPeerHoldTimeConfigured and the         Hold Time received in the OPEN message.        This value must be at lease three seconds         if it is not zero (0) in which case the         Hold Timer has not been established with the         peer, or, the value of         bgpPeerHoldTimeConfigured is zero (0)."            ::= { bgpPeerEntry 23 }        																				Various Authors      Expires July  13, 2002             [Page 16]Internet Draft              BGP-MIB v2              July 13, 2001				bgpPeerKeepAlive OBJECT-TYPE            SYNTAX     Integer32 ( 0 | 1..21845 )            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "Time interval in seconds for the KeepAlive        timer established with the peer.  The value of        this object is calculated by this BGP         speaker such that, when compared with         bgpPeerHoldTime, it has the same         proportion as what        bgpPeerKeepAliveConfigured has when         compared with bgpPeerHoldTimeConfigured.        If the value of this object is zero (0),        it indicates that the KeepAlive timer has         not been established with the peer, or,        the value of bgpPeerKeepAliveConfigured is         zero (0)."            ::= { bgpPeerEntry 24 }        bgpPeerHoldTimeConfigured OBJECT-TYPE            SYNTAX     Integer32 ( 0 | 3..65535 )            MAX-ACCESS read-write            STATUS     current            DESCRIPTION        "Time interval in seconds for the Hold Time        configured for this BGP speaker with this        peer.  This value is placed in an OPEN         message sent to this peer by this BGP         speaker, and is compared with the Hold         Time field in an OPEN message received         from the peer when determining the Hold        Time (bgpPeerHoldTime) with the peer.        This value must not be less than three         seconds if it is not zero (0) in which         case the Hold Time is NOT to be        established with the peer.  The suggested         value for this timer is 90 seconds."            ::= { bgpPeerEntry 25 }		bgpPeerKeepAliveConfigured OBJECT-TYPE            SYNTAX     Integer32 ( 0 | 1..21845 )            MAX-ACCESS read-write            STATUS     current            DESCRIPTION        "Time interval in seconds for the         KeepAlive timer configured for this BGP         speaker with this peer.  The value of this         object will only determine the        KEEPALIVE messages' frequency relative to         the value specified in         bgpPeerHoldTimeConfigured; the actual        time interval for the KEEPALIVE messages is        indicated by bgpPeerKeepAlive.  A         reasonable maximum value for this timer         would be configured to be one         Various Authors      Expires July  13, 2002             [Page 17]Internet Draft              BGP-MIB v2              July 13, 2001				third of that of         bgpPeerHoldTimeConfigured.        If the value of this object is zero (0),        no periodical KEEPALIVE messages are sent        to the peer after the BGP connection has         been established.  The suggested value for         this timer is 30 seconds."            ::= { bgpPeerEntry 26 }        bgpPeerMinASOriginationInterval OBJECT-TYPE            SYNTAX     Integer32 (1..65535)            MAX-ACCESS read-write            STATUS     current            DESCRIPTION        "Time interval in seconds for the        MinASOriginationInterval timer.        The suggested value for this timer is 15         seconds."            ::= { bgpPeerEntry 27 }        bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE            SYNTAX     Integer32 (1..65535)            MAX-ACCESS read-write            STATUS     current            DESCRIPTION        "Time interval in seconds for the        MinRouteAdvertisementInterval timer.        The suggested value for this timer is 30         seconds."            ::= { bgpPeerEntry 28 }        bgpPeerInUpdateElapsedTime OBJECT-TYPE            SYNTAX     Gauge32            MAX-ACCESS read-only            STATUS     current            DESCRIPTION        "Elapsed time in seconds since the last BGP        UPDATE message was received from the peer.        Each time bgpPeerInUpdates is incremented,        the value of this object is set to zero         (0)."            ::= { bgpPeerEntry 29 }        bgpPeerAuthenticationSent OBJECT-TYPE            SYNTAX TruthValue            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The local peer has sent authentication information             to the remote peer in the BGP Authentication field."            ::= { bgpPeerEntry 30  }        Various Authors      Expires July  13, 2002             [Page 19]Internet Draft              BGP-MIB v2              July 13, 2001				bgpPeerAuthenticationSentCode OBJECT-TYPE            SYNTAX  Integer32 (0..255)            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The code of the authentication information sent to             the remote peer."            ::= { bgpPeerEntry 31 }                    bgpPeerAuthenticationSentValue OBJECT-TYPE            SYNTAX  OCTET STRING (SIZE (0..255))        -- jmh length is too much            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The payload of the authentication information received             from the remote peer."            ::= { bgpPeerEntry 32 }                    bgpPeerAuthenticationReceived OBJECT-TYPE            SYNTAX TruthValue            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The local peer has received authentication information             from the remote peer in the BGP Authentication field."            ::= { bgpPeerEntry 33 }                    bgpPeerAuthenticationReceivedCode OBJECT-TYPE            SYNTAX  Integer32 (0..255)            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The code of the authentication information received from             the remote peer."            ::= { bgpPeerEntry 34  }                    bgpPeerAuthenticationReceivedValue OBJECT-TYPE            SYNTAX  OCTET STRING (SIZE (0..255))        -- jmh length is too much            MAX-ACCESS read-write            STATUS current            DESCRIPTION            "The payload of the authentication information received from            the remote peer."            ::= { bgpPeerEntry 35 } ---- new counters--    bgpPrefixCountersTable OBJECT-TYPE        SYNTAX     SEQUENCE OF BgpPrefixCountersEntry        MAX-ACCESS not-accessible        STATUS     current        DESCRIPTION        "Additional per-peer, per AFI/SAFI counters for prefixes"        ::= { bgpPeerData 2 }Various Authors      Expires July  13, 2002             [Page 20]Internet Draft              BGP-MIB v2              July 13, 2001    bgpPrefixCountersEntry OBJECT-TYPE        SYNTAX     BgpPrefixCountersEntry        MAX-ACCESS not-accessible        STATUS     current        DESCRIPTION        "Entry containing information about a bgp-peer's prefix        counters."        INDEX {        bgpPeerRemoteAddrType,        bgpPeerRemoteAddr,        bgpPrefixCountersAfi,        bgpPrefixCountersSafi            }        ::= { bgpPrefixCountersTable 1 }    BgpPrefixCountersEntry ::= SEQUENCE {        bgpPrefixCountersAfi            InetAddressType,        bgpPrefixCountersSafi            BgpSafi,        bgpPrefixCountersPrefixesReceived            Counter32,        bgpPrefixCountersPrefixesSent            Counter32,        bgpPrefixCountersWithdrawsReceived            Counter32,        bgpPrefixCountersWithdrawsSent            Counter32,        bgpPrefixCountersInPrefixes            Gauge32,        bgpPrefixCountersInPrefixesAccepted            Gauge32,        bgpPrefixCountersInPrefixesRejected            Gauge32,        bgpPrefixCountersOutPrefixes            Gauge32        }    bgpPrefixCountersAfi OBJECT-TYPE        SYNTAX     InetAddressType        MAX-ACCESS read-only        STATUS     current        DESCRIPTION        "The AFI index of the per-peer, per prefix counters"        ::= { bgpPrefixCountersEntry 1 }    bgpPrefixCountersSafi OBJECT-TYPE        SYNTAX     BgpSafi        MAX-ACCESS read-only        STATUS     current        DESCRIPTION        "The SAFI index of the per-peer, per prefix counters"        ::= { bgpPrefixCountersEntry 2 }