BGP4-MIB DEFINITIONS ::= BEGIN                IMPORTS                    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,                    IpAddress, Integer32, Counter32, Gauge32                        FROM SNMPv2-SMI                    mib-2                        FROM RFC1213-MIB;                bgp MODULE-IDENTITY                    LAST-UPDATED "9405050000Z"                    ORGANIZATION "IETF BGP Working Group"                    CONTACT-INFO                                "   John Chu  (Editor)                            Postal: IBM Corp.                                    P.O.Box 218                                    Yorktown Heights, NY 10598                                    US                               Tel: +1 914 945 3156                               Fax: +1 914 945 2141                            E-mail: jychu@watson.ibm.com"                        DESCRIPTION                                "The MIB module for BGP-4."                    ::= { mib-2 15 }                bgpVersion OBJECT-TYPE                    SYNTAX     OCTET STRING (SIZE (1..255))                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "Vector of supported BGP protocol version                            numbers.  Each peer negotiates the version                            from this vector.  Versions are identified                            via the string of bits contained within this                            object.  The first octet contains bits 0 to                            7, the second octet contains bits 8 to 15,                            and so on, with the most significant bit                            referring to the lowest bit number in the                            octet (e.g., the MSB of the first octet                            refers to bit 0).  If a bit, i, is present                            and set, then the version (i+1) of the BGP                            is supported."                    ::= { bgp 1 }                bgpLocalAs OBJECT-TYPE                    SYNTAX     INTEGER (0..65535)                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The local autonomous system number."                    ::= { bgp 2 }                -- BGP Peer table.  This table contains, one entry per                -- BGP peer, information about the BGP peer.                bgpPeerTable OBJECT-TYPE                    SYNTAX     SEQUENCE OF BgpPeerEntry                    MAX-ACCESS not-accessible                    STATUS     current                    DESCRIPTION                            "BGP peer table.  This table contains,                            one entry per BGP peer, information about                            the connections with BGP peers."                    ::= { bgp 3 }                bgpPeerEntry OBJECT-TYPE                    SYNTAX     BgpPeerEntry                    MAX-ACCESS not-accessible                    STATUS     current                    DESCRIPTION                            "Entry containing information about the                            connection with a BGP peer."                    INDEX { bgpPeerRemoteAddr }                    ::= { bgpPeerTable 1 }                BgpPeerEntry ::= SEQUENCE {                        bgpPeerIdentifier                            IpAddress,                        bgpPeerState                            INTEGER,                        bgpPeerAdminStatus                            INTEGER,                        bgpPeerNegotiatedVersion                            Integer32,                        bgpPeerLocalAddr                            IpAddress,                        bgpPeerLocalPort                            INTEGER,                        bgpPeerRemoteAddr                            IpAddress,                        bgpPeerRemotePort                            INTEGER,                        bgpPeerRemoteAs                            INTEGER,                        bgpPeerInUpdates                            Counter32,                        bgpPeerOutUpdates                            Counter32,                        bgpPeerInTotalMessages                            Counter32,                        bgpPeerOutTotalMessages                            Counter32,                        bgpPeerLastError                            OCTET STRING,                        bgpPeerFsmEstablishedTransitions                            Counter32,                        bgpPeerFsmEstablishedTime                            Gauge32,                        bgpPeerConnectRetryInterval                            INTEGER,                        bgpPeerHoldTime                            INTEGER,                        bgpPeerKeepAlive                            INTEGER,                        bgpPeerHoldTimeConfigured                            INTEGER,                        bgpPeerKeepAliveConfigured                            INTEGER,                        bgpPeerMinASOriginationInterval                            INTEGER,                        bgpPeerMinRouteAdvertisementInterval                            INTEGER,                        bgpPeerInUpdateElapsedTime                            Gauge32                        }                bgpPeerIdentifier OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The BGP Identifier of this entry's BGP                            peer."                    ::= { bgpPeerEntry 1 }                bgpPeerState OBJECT-TYPE                    SYNTAX     INTEGER {                                        idle(1),                                        connect(2),                                        active(3),                                        opensent(4),                                        openconfirm(5),                                        established(6)                               }                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The BGP peer connection state."                    ::= { bgpPeerEntry 2 }                bgpPeerAdminStatus OBJECT-TYPE                    SYNTAX     INTEGER {                                        stop(1),                                        start(2)                               }                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "The desired state of the BGP connection.                            A transition from 'stop' to 'start' will                            cause the BGP Start Event to be generated.                            A transition from 'start' to 'stop' will                            cause the BGP Stop Event to be generated.                            This parameter can be used to restart BGP                            peer connections.  Care should be used in                            providing write access to this object                            without adequate authentication."                    ::= { bgpPeerEntry 3 }                bgpPeerNegotiatedVersion OBJECT-TYPE                    SYNTAX     Integer32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The negotiated version of BGP running                            between the two peers."                    ::= { bgpPeerEntry 4 }                bgpPeerLocalAddr OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The local IP address of this entry's BGP                            connection."                    ::= { bgpPeerEntry 5 }                bgpPeerLocalPort OBJECT-TYPE                    SYNTAX     INTEGER (0..65535)                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The local port for the TCP connection                            between the BGP peers."                    ::= { bgpPeerEntry 6 }                bgpPeerRemoteAddr OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The remote IP address of this entry's BGP                            peer."                    ::= { bgpPeerEntry 7 }                bgpPeerRemotePort OBJECT-TYPE                    SYNTAX     INTEGER (0..65535)                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The remote port for the TCP connection                            between the BGP peers.  Note that the                            objects bgpPeerLocalAddr,                            bgpPeerLocalPort, bgpPeerRemoteAddr and                            bgpPeerRemotePort provide the appropriate                            reference to the standard MIB TCP                            connection table."                    ::= { bgpPeerEntry 8 }                bgpPeerRemoteAs OBJECT-TYPE                    SYNTAX     INTEGER (0..65535)                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The remote autonomous system number."                    ::= { bgpPeerEntry 9 }                bgpPeerInUpdates OBJECT-TYPE                    SYNTAX     Counter32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The number of BGP UPDATE messages                            received on this connection.  This object                            should be initialized to zero (0) when the                            connection is established."                    ::= { bgpPeerEntry 10 }                bgpPeerOutUpdates OBJECT-TYPE                    SYNTAX     Counter32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The number of BGP UPDATE messages                            transmitted on this connection.  This                            object should be initialized to zero (0)                            when the connection is established."                    ::= { bgpPeerEntry 11 }                bgpPeerInTotalMessages OBJECT-TYPE                    SYNTAX     Counter32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The total number of messages received                            from the remote peer on this connection.                            This object should be initialized to zero                            when the connection is established."                    ::= { bgpPeerEntry 12 }                bgpPeerOutTotalMessages OBJECT-TYPE                    SYNTAX     Counter32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The total number of messages transmitted to                            the remote peer on this connection.  This                            object should be initialized to zero when                            the connection is established."                    ::= { bgpPeerEntry 13 }