bgpPeerLastError OBJECT-TYPE                    SYNTAX     OCTET STRING (SIZE (2))                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The last error code and subcode seen by this                            peer on this connection.  If no error has                            occurred, this field is zero.  Otherwise, the                            first byte of this two byte OCTET STRING                            contains the error code, and the second byte                            contains the subcode."                    ::= { bgpPeerEntry 14 }                bgpPeerFsmEstablishedTransitions OBJECT-TYPE                    SYNTAX     Counter32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The total number of times the BGP FSM                            transitioned into the established state."                    ::= { bgpPeerEntry 15 }                bgpPeerFsmEstablishedTime OBJECT-TYPE                    SYNTAX     Gauge32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "This timer indicates how long (in                            seconds) this peer has been in the                            Established state or how long                            since this peer was last in the                            Established state.  It is set to zero when                            a new peer is configured or the router is                            booted."                    ::= { bgpPeerEntry 16 }                bgpPeerConnectRetryInterval OBJECT-TYPE                    SYNTAX     INTEGER (1..65535)                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the                            ConnectRetry timer.  The suggested value                            for this timer is 120 seconds."                    ::= { bgpPeerEntry 17 }                bgpPeerHoldTime OBJECT-TYPE                    SYNTAX     INTEGER  ( 0 | 3..65535 )                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the Hold                            Timer established with the peer.  The                            value of this object is calculated by this                            BGP speaker by using the smaller of the                            value in bgpPeerHoldTimeConfigured and the                            Hold Time received in the OPEN message.                            This value must be at lease three seconds                            if it is not zero (0) in which case the                            Hold Timer has not been established with                            the peer, or, the value of                            bgpPeerHoldTimeConfigured is zero (0)."                    ::= { bgpPeerEntry 18 }                bgpPeerKeepAlive OBJECT-TYPE                    SYNTAX     INTEGER ( 0 | 1..21845 )                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the KeepAlive                            timer established with the peer.  The value                            of this object is calculated by this BGP                            speaker such that, when compared with                            bgpPeerHoldTime, it has the same                            proportion as what                            bgpPeerKeepAliveConfigured has when                            compared with bgpPeerHoldTimeConfigured.                            If the value of this object is zero (0),                            it indicates that the KeepAlive timer has                            not been established with the peer, or,                            the value of bgpPeerKeepAliveConfigured is                            zero (0)."                    ::= { bgpPeerEntry 19 }                bgpPeerHoldTimeConfigured OBJECT-TYPE                    SYNTAX     INTEGER ( 0 | 3..65535 )                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the Hold Time                            configured for this BGP speaker with this                            peer.  This value is placed in an OPEN                            message sent to this peer by this BGP                            speaker, and is compared with the Hold                            Time field in an OPEN message received                            from the peer when determining the Hold                            Time (bgpPeerHoldTime) with the peer.                            This value must not be less than three                            seconds if it is not zero (0) in which                            case the Hold Time is NOT to be                            established with the peer.  The suggested                            value for this timer is 90 seconds."                    ::= { bgpPeerEntry 20 }                bgpPeerKeepAliveConfigured OBJECT-TYPE                    SYNTAX     INTEGER ( 0 | 1..21845 )                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the                            KeepAlive timer configured for this BGP                            speaker with this peer.  The value of this                            object will only determine the                            KEEPALIVE messages' frequency relative to                            the value specified in                            bgpPeerHoldTimeConfigured; the actual                            time interval for the KEEPALIVE messages                            is indicated by bgpPeerKeepAlive.  A                            reasonable maximum value for this timer                            would be configured to be one                            third of that of                            bgpPeerHoldTimeConfigured.                            If the value of this object is zero (0),                            no periodical KEEPALIVE messages are sent                            to the peer after the BGP connection has                            been established.  The suggested value for                            this timer is 30 seconds."                    ::= { bgpPeerEntry 21 }                bgpPeerMinASOriginationInterval OBJECT-TYPE                    SYNTAX     INTEGER (1..65535)                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the                            MinASOriginationInterval timer.                            The suggested value for this timer is 15                            seconds."                    ::= { bgpPeerEntry 22 }                bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE                    SYNTAX     INTEGER (1..65535)                    MAX-ACCESS read-write                    STATUS     current                    DESCRIPTION                            "Time interval in seconds for the                            MinRouteAdvertisementInterval timer.                            The suggested value for this timer is 30                            seconds."                    ::= { bgpPeerEntry 23 }                bgpPeerInUpdateElapsedTime OBJECT-TYPE                    SYNTAX     Gauge32                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "Elapsed time in seconds since the last BGP                            UPDATE message was received from the peer.                            Each time bgpPeerInUpdates is incremented,                            the value of this object is set to zero                            (0)."                    ::= { bgpPeerEntry 24 }                bgpIdentifier OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     current                    DESCRIPTION                            "The BGP Identifier of local system."                    ::= { bgp 4 }                -- Received Path Attribute Table.  This table contains,                -- one entry per path to a network, path attributes                -- received from all peers running BGP version 3 or                -- less.  This table is deprecated.                bgpRcvdPathAttrTable OBJECT-TYPE                    SYNTAX     SEQUENCE OF BgpPathAttrEntry                    MAX-ACCESS not-accessible                    STATUS     obsolete                    DESCRIPTION                            "The BGP Received Path Attribute Table                            contains information about paths to                            destination networks received from all                            peers running BGP version 3 or less."                    ::= { bgp 5 }                bgpPathAttrEntry OBJECT-TYPE                    SYNTAX     BgpPathAttrEntry                    MAX-ACCESS not-accessible                    STATUS     obsolete                    DESCRIPTION                            "Information about a path to a network."                    INDEX { bgpPathAttrDestNetwork,                            bgpPathAttrPeer        }                    ::= { bgpRcvdPathAttrTable 1 }                BgpPathAttrEntry ::= SEQUENCE {                    bgpPathAttrPeer                         IpAddress,                    bgpPathAttrDestNetwork                         IpAddress,                    bgpPathAttrOrigin                         INTEGER,                    bgpPathAttrASPath                         OCTET STRING,                    bgpPathAttrNextHop                         IpAddress,                    bgpPathAttrInterASMetric                         Integer32                }                bgpPathAttrPeer OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     obsolete                    DESCRIPTION                            "The IP address of the peer where the path                            information was learned."                    ::= { bgpPathAttrEntry 1 }                bgpPathAttrDestNetwork OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     obsolete                    DESCRIPTION                            "The address of the destination network."                    ::= { bgpPathAttrEntry 2 }                bgpPathAttrOrigin OBJECT-TYPE                    SYNTAX     INTEGER {                                   igp(1),-- networks are interior                                   egp(2),-- networks learned via EGP                                   incomplete(3) -- undetermined                               }                    MAX-ACCESS read-only                    STATUS     obsolete                    DESCRIPTION                         "The ultimate origin of the path information."                    ::= { bgpPathAttrEntry 3 }                bgpPathAttrASPath OBJECT-TYPE                    SYNTAX     OCTET STRING (SIZE (2..255))                    MAX-ACCESS read-only                    STATUS     obsolete                    DESCRIPTION                            "The set of ASs that must be traversed to                            reach the network.  This object is                            probably best represented as SEQUENCE OF                            INTEGER.  For SMI compatibility, though,                            it is represented as OCTET STRING.  Each                            AS is represented as a pair of octets                            according to the following algorithm:                                first-byte-of-pair = ASNumber / 256;                                second-byte-of-pair = ASNumber & 255;"                    ::= { bgpPathAttrEntry 4 }                bgpPathAttrNextHop OBJECT-TYPE                    SYNTAX     IpAddress                    MAX-ACCESS read-only                    STATUS     obsolete                    DESCRIPTION                            "The address of the border router that                            should be used for the destination                            network."                    ::= { bgpPathAttrEntry 5 }                bgpPathAttrInterASMetric OBJECT-TYPE                    SYNTAX     Integer32                    MAX-ACCESS read-only