//TIMER1 initialize - prescale:256
// WGM: 0) Normal, TOP=0xFFFF
// desired value: 100mSec
// actual value: 100.000mSec (0.0%)
void timer1_init(void)
{
 TCCR1B = 0x00; //stop
 TCNT1H = 0xF4; //setup
 TCNT1L = 0xC0;
 OCR1AH = 0x0B;
 OCR1AL = 0x40;
 OCR1BH = 0x0B;
 OCR1BL = 0x40;
 ICR1H  = 0x0B;
 ICR1L  = 0x40;
 TCCR1A = 0x00;
 TCCR1B = 0x04; //start Timer
}

#pragma interrupt_handler timer1_ovf_isr:9
void timer1_ovf_isr(void)
{
 //TIMER1 has overflowed
 TCNT1H = 0xF4; //reload counter high value
 TCNT1L = 0xC0; //reload counter low value
 Time.Bz = TRUE; //定時標志置1
}
/**************************************************
*原型：void time1_task(void)
*功能：20ms中斷到置time_s為1
*說明：利用定時中斷去執行任務
*參數：無
*返回：無
**************************************************/
void Time1Task(void)
 {
	 Time.Bz = FALSE;			//毫秒定時標志清0
	 
	 Time.Sec--;
	   //LED閃爍
     LEDCOUNT = LED();
	 
	 if(Time.Mec ++ == 450)//1分鐘定時450*120ms
	  			{
				 Time.Mec = NULL;//毫秒計數清
				 if(Time.Min++ == Time.Atd)//如果定時到
				 			 {
							    Time.Min = NULL;//分鐘定時清0
								if((!Busybz)&&(WorkCount>RTEL))//如果在未拔號狀態
							  			   {
										     WorkCount = CALLTEL;
											 DealTxUartBz = TRUE;//如果未讀到電話本，紅燈亮
							  			   }
							  }
				 }
	  if(!Time.Sec)//定時到
				{
				
				 Time.Sec = timesec; //2秒定時
				 if(WorkCount < NULLACK)  
				 				DealTxUartBz = TRUE;//如果未讀到電話本，紅燈亮
			
				 }

				 
  }