?? startup.s
字號:
;/****************************************Copyright (c)**************************************************
;** Guangzou ZLG-MCU Development Co.,LTD.
;** graduate school
;** http://www.zlgmcu.com
;**
;**--------------File Info-------------------------------------------------------------------------------
;** File name: Startup.s
;** Last modified Date: 2004-09-17
;** Last Version: 1.0
;** Descriptions: The start up codes for LPC2200, including the initializing codes for the entry point of exceptions and the stacks of user tasks.
;** Every project should have a independent copy of this file for related modifications
;**------------------------------------------------------------------------------------------------------
;** Created by: Chenmingji
;** Created date: 2004-02-02
;** Version: 1.0
;** Descriptions: The original version
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: Chenmingji
;** Modified date: 2004-09-17
;** Version: 1.01
;** Descriptions: Modified the bus setting to adapt for many common situations
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: Chenmingji
;** Modified date: 2004-09-17
;** Version: 1.02
;** Descriptions: Added codes to support the enciphering of the chip
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: Chenmingji
;** Modified date: 2004-09-17
;** Version: 1.04
;** Descriptions: Renewed the template, added codes to support more compilers
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: Ganda
;** Modified date: 2005-06-15
;** Version: 1.05
;** Descriptions: Define Macro for Bus speed
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by:
;** Modified date:
;** Version:
;** Descriptions:
;**
;********************************************************************************************************/
;define the stack size
;定義堆棧的大小
FIQ_STACK_LEGTH EQU 0
IRQ_STACK_LEGTH EQU 9*8 ;every layer need 9 bytes stack , permit 8 layer .每層嵌套需要9個字堆棧，允許8層嵌套
ABT_STACK_LEGTH EQU 0
UND_STACK_LEGTH EQU 0
NoInt EQU 0x80
;// Add by Ganda
NoFIQ EQU 0x40
;// 2005/06/15
USR32Mode EQU 0x10
SVC32Mode EQU 0x13
SYS32Mode EQU 0x1f
IRQ32Mode EQU 0x12
FIQ32Mode EQU 0x11
PINSEL2 EQU 0xE002C014
;/* Define the Bus Speed */
BCFG0 EQU 0xFFE00000 ;// Control Word of BANK0 / CS0
BCFG1 EQU 0xFFE00004 ;// Control Word of BANK1 / CS1
BCFG2 EQU 0xFFE00008 ;// Control Word of BANK2 / CS2
BCFG3 EQU 0xFFE0000C ;// Control Word of BANK3 / CS3
BCFG_08DEF EQU 0x00000000 ;// 8Bit Bus
BCFG_16DEF EQU 0x10000400 ;// 16Bit Bus
BCFG_32DEF EQU 0x20000400 ;// 32Bit Bus
;// | IDCY | WST1 | WST2
;// | Idle width | Read width | Write width
;// | 0x00 ~ 0x0f| 0x00 ~ 0x1f| 0x00~0x1f
BCFG_FLASH EQU (BCFG_16DEF | (0x00<<00) | (0x01<<05) | (0x01<<11)) ;// For -90ns
BCFG_PSRAM EQU (BCFG_16DEF | (0x00<<00) | (0x01<<05) | (0x01<<11)) ;// For -70ns
BCFG_CS2 EQU (BCFG_16DEF | (0x0f<<00) | (0x1f<<05) | (0x1f<<11)) ;// Blank
BCFG_CS3 EQU (BCFG_16DEF | (0x01<<00) | (0x03<<05) | (0x03<<11)) ;// For Peripheral Equipment
IMPORT __use_no_semihosting_swi
IMPORT __use_two_region_memory
;The imported labels
;引入的外部標號在這聲明
IMPORT FIQ_Exception ;Fast interrupt exceptions handler 快速中斷異常處理程序
IMPORT __main ;The entry point to the main function C語言主程序入口
IMPORT TargetResetInit ;initialize the target board 目標板基本初始化
IMPORT SoftwareInterrupt
;The emported labels
;給外部使用的標號在這聲明
EXPORT bottom_of_heap
EXPORT bottom_of_Stacks
EXPORT top_of_heap
EXPORT StackUsr
EXPORT Reset
EXPORT __user_initial_stackheap
CODE32
AREA vectors,CODE,READONLY
ENTRY
;interrupt vectors
;中斷向量表
Reset
LDR PC, ResetAddr
LDR PC, UndefinedAddr
LDR PC, SWI_Addr
LDR PC, PrefetchAddr
LDR PC, DataAbortAddr
DCD 0xb9205f80
LDR PC, [PC, #-0xff0]
LDR PC, FIQ_Addr
ResetAddr DCD ResetInit
UndefinedAddr DCD Undefined
SWI_Addr DCD SoftwareInterrupt
PrefetchAddr DCD PrefetchAbort
DataAbortAddr DCD DataAbort
Nouse DCD 0
IRQ_Addr DCD 0
FIQ_Addr DCD FIQ_Handler
;未定義指令
Undefined
B Undefined
;取指令中止
PrefetchAbort
B PrefetchAbort
;取數據中止
DataAbort
B DataAbort
;快速中斷
FIQ_Handler
STMFD SP!, {R0-R3, LR}
BL FIQ_Exception
LDMFD SP!, {R0-R3, LR}
SUBS PC, LR, #4
;/*********************************************************************************************************
;** unction name 函數名稱: InitStack
;** Descriptions 功能描述: Initialize the stacks 初始化堆棧
;** input parameters 輸 入: None 無
;** Returned value 輸 出 : None 無
;** Used global variables 全局變量: None 無
;** Calling modules 調用模塊: None 無
;**
;** Created by 作 者: Chenmingji 陳明計
;** Created Date 日 期: 2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by 修 改:
;** Modified date 日 期:
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
InitStack
MOV R0, LR
;Build the SVC stack
;設置中斷模式堆棧
MSR CPSR_c, #0xd2
LDR SP, StackIrq
;Build the FIQ stack
;設置快速中斷模式堆棧
MSR CPSR_c, #0xd1
LDR SP, StackFiq
;Build the DATAABORT stack
;設置中止模式堆棧
MSR CPSR_c, #0xd7
LDR SP, StackAbt
;Build the UDF stack
;設置未定義模式堆棧
MSR CPSR_c, #0xdb
LDR SP, StackUnd
;Build the SYS stack
;設置系統模式堆棧
MSR CPSR_c, #0xdf
LDR SP, =StackUsr
MOV PC, R0
;/*********************************************************************************************************
;** unction name 函數名稱: ResetInit
;** Descriptions 功能描述: RESET 復位入口
;** input parameters 輸 入: None 無
;** Returned value 輸 出 : None 無
;** Used global variables 全局變量: None 無
;** Calling modules 調用模塊: None 無
;**
;** Created by 作 者: Chenmingji 陳明計
;** Created Date 日 期: 2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by 修 改: Chenmingji 陳明計
;** Modified date 日 期: 2004/02/02 2004年3月3日
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
ResetInit
;Initial the extenal bus controller
;初始化外部總線控制器，根據目標板決定配置
LDR R0, =PINSEL2
IF :DEF: EN_CRP
LDR R1, =0x0f814910
ELSE
LDR R1, =0x0f814914
ENDIF
STR R1, [R0]
LDR R0, =BCFG0
LDR R1, =0x1000ffef;BCFG_FLASH
STR R1, [R0]
LDR R0, =BCFG1
LDR R1, =0x1000ffef;BCFG_PSRAM
STR R1, [R0]
LDR R0, =BCFG2
LDR R1, =0x1000ffef;BCFG_CS2
STR R1, [R0]
LDR R0, =BCFG3
LDR R1, =0x1000ffef;BCFG_CS3
STR R1, [R0]
BL InitStack ; Initialize the stack 初始化堆棧
BL TargetResetInit ; Initialize the target board 目標板基本初始化
; Jump to the entry point of C program 跳轉到c語言入口
B __main
;/*********************************************************************************************************
;** unction name 函數名稱: __user_initial_stackheap
;** Descriptions 功能描述: Initial the function library stacks and heaps, can not deleted! 庫函數初始化堆和棧，不能刪除
;** input parameters 輸 入: reference by function library 參考庫函數手冊
;** Returned value 輸 出 : reference by function library 參考庫函數手冊
;** Used global variables 全局變量: None 無
;** Calling modules 調用模塊: None 無
;**
;** Created by 作 者: Chenmingji 陳明計
;** Created Date 日 期: 2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by
;** Modified date
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
__user_initial_stackheap
LDR r0,=bottom_of_heap
; LDR r1,=StackUsr
LDR r2,=top_of_heap
LDR r3,=bottom_of_Stacks
MOV pc,lr
StackIrq DCD IrqStackSpace + (IRQ_STACK_LEGTH - 1)* 4
StackFiq DCD FiqStackSpace + (FIQ_STACK_LEGTH - 1)* 4
StackAbt DCD AbtStackSpace + (ABT_STACK_LEGTH - 1)* 4
StackUnd DCD UndtStackSpace + (UND_STACK_LEGTH - 1)* 4
;/*********************************************************************************************************
;** unction name 函數名稱: CrpData
;** Descriptions 功能描述: encrypt the chip
;** input parameters 輸 入: None 無
;** Returned value 輸 出 : None 無
;** Used global variables 全局變量: None 無
;** Calling modules 調用模塊: None 無
;**
;** Created by 作 者: Chenmingji 陳明計
;** Created Date 日 期: 2004/03/27 2004年3月27日
;**-------------------------------------------------------------------------------------------------------
;** Modified by 修 改:
;** Modified date 日 期:
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
IF :DEF: EN_CRP
IF . >= 0x1fc
INFO 1,"\nThe data at 0x000001fc must be 0x87654321.\nPlease delete some source before this line."
ENDIF
CrpData
WHILE . < 0x1fc
NOP
WEND
CrpData1
DCD 0x87654321 ;/*When the Data is 為0x87654321,user code be protected. 當此數為0x87654321時，用戶程序被保護 */
ENDIF
;/* 分配堆棧空間 */
AREA MyStacks, DATA, NOINIT, ALIGN=2
IrqStackSpace SPACE IRQ_STACK_LEGTH * 4 ;Stack spaces for Interrupt ReQuest Mode 中斷模式堆棧空間
FiqStackSpace SPACE FIQ_STACK_LEGTH * 4 ;Stack spaces for Fast Interrupt reQuest Mode 快速中斷模式堆棧空間
AbtStackSpace SPACE ABT_STACK_LEGTH * 4 ;Stack spaces for Suspend Mode 中止義模式堆棧空間
UndtStackSpace SPACE UND_STACK_LEGTH * 4 ;Stack spaces for Undefined Mode 未定義模式堆棧
AREA Heap, DATA, NOINIT
bottom_of_heap SPACE 1
AREA StackBottom, DATA, NOINIT
bottom_of_Stacks SPACE 1
AREA HeapTop, DATA, NOINIT
top_of_heap
AREA Stacks, DATA, NOINIT
StackUsr
END
;/*********************************************************************************************************
;** End Of File
;********************************************************************************************************/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -