## Character device configuration#mainmenu_option next_commentcomment 'Character devices'tristate 'SkyEye LCD support(for EP7312)' CONFIG_LCDtristate 'SkyEye Touch Screen support(for EP7312)' CONFIG_TOUCH_SCREENbool 'Virtual terminal' CONFIG_VTif [ "$CONFIG_VT" = "y" ]; then   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLEfitristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIALif [ "$CONFIG_SERIAL" = "y" ]; then   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE   if [ "$CONFIG_ARCH_ACORN" = "y" ]; then      tristate '   Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL      tristate '   Dual serial port support' CONFIG_DUALSP_SERIAL   fifiif [ "$CONFIG_ACPI" = "y" ]; then   bool '  Support for serial ports defined by ACPI tables' CONFIG_SERIAL_ACPIfidep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIALif [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then   bool '  Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS   bool '  Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ   bool '  Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ   bool '  Support special multiport boards' CONFIG_SERIAL_MULTIPORT   bool '  Support the Bell Technologies HUB6 card' CONFIG_HUB6fi#bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD#bool 'DAC0832 driver support' CONFIG_DAC0832#bool 'LCD driver support ' CONFIG_LCD#bool 'ADC0809 driver support' CONFIG_ADC0809#bool 'Ep7312 Keyboard driver support' CONFIG_KEYBOARD_EP7312#bool 'Ep7312 UART2 driver support' CONFIG_UART2_SOSOif [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then   tristate '  Computone IntelliPort Plus serial support' CONFIG_COMPUTONE   tristate '  Comtrol Rocketport support' CONFIG_ROCKETPORT   tristate '  Cyclades async mux support' CONFIG_CYCLADES   if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then      bool '    Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR   fi   tristate '  Digiboard Intelligent Async Support' CONFIG_DIGIEPCA   if [ "$CONFIG_DIGIEPCA" = "n" ]; then      tristate '  Digiboard PC/Xx Support' CONFIG_DIGI   fi   tristate '  Hayes ESP serial port support' CONFIG_ESPSERIAL   tristate '  Moxa Intellio support' CONFIG_MOXA_INTELLIO   tristate '  Moxa SmartIO support' CONFIG_MOXA_SMARTIO   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then      dep_tristate '  Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m   fi   tristate '  Microgate SyncLink card support' CONFIG_SYNCLINK   tristate '  HDLC line discipline support' CONFIG_N_HDLC   tristate '  SDL RISCom/8 card support' CONFIG_RISCOM8   tristate '  Specialix IO8+ card support' CONFIG_SPECIALIX   if [ "$CONFIG_SPECIALIX" != "n" ]; then      bool '  Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS   fi    tristate '  Specialix SX (and SI) card support' CONFIG_SX   tristate '  Specialix RIO system support' CONFIG_RIO   if [ "$CONFIG_RIO" != "n" ]; then     bool '    Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI   fi   bool '  Stallion multiport serial support' CONFIG_STALDRV   if [ "$CONFIG_STALDRV" = "y" ]; then     tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION     tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION   fi   if [ "$CONFIG_MIPS" = "y" ]; then     bool '  TMPTX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912     dep_bool '     Console on TMPTX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912     bool '  Enable Au1000 UART Support' CONFIG_AU1000_UART     if [ "$CONFIG_AU1000_UART" = "y" ]; then         bool '        Enable Au1000 serial console' CONFIG_AU1000_SERIAL_CONSOLE     fi   fifiif [ "$CONFIG_IT8712" = "y" ]; then   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then     define_bool CONFIG_IT8172_CIR y   else     bool '    Enable PS2 Keyboard Support' CONFIG_PC_KEYB   fi   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0   bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1fiif [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then   tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232fisource drivers/serial/Config.inbool 'Unix98 PTY support' CONFIG_UNIX98_PTYSif [ "$CONFIG_UNIX98_PTYS" = "y" ]; then   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256fiif [ "$CONFIG_PARPORT" != "n" ]; then   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT   if [ "$CONFIG_PRINTER" != "n" ]; then      bool '  Support for console on line printer' CONFIG_LP_CONSOLE   fi   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORTfisource drivers/i2c/Config.insource drivers/l3/Config.inmainmenu_option next_commentcomment 'Mice'tristate 'Bus Mouse Support' CONFIG_BUSMOUSEif [ "$CONFIG_BUSMOUSE" != "n" ]; then   dep_tristate '  ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE   dep_tristate '  Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE   dep_tristate '  Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE   if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then      dep_tristate '  Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE   fifitristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSEif [ "$CONFIG_MOUSE" != "n" ]; then   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE   tristate '  PC110 digitizer pad support' CONFIG_PC110_PADfiendmenusource drivers/char/joystick/Config.intristate 'QIC-02 tape support' CONFIG_QIC02_TAPEif [ "$CONFIG_QIC02_TAPE" != "n" ]; then   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'   else      comment '  Setting runtime QIC-02 configuration is done with qic02conf'      comment '  from the tpqic02-support package.  It is available at'      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'   fifimainmenu_option next_commentcomment 'Watchdog Cards'bool 'Watchdog Timer Support'	CONFIG_WATCHDOGif [ "$CONFIG_WATCHDOG" != "n" ]; then   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG   tristate '  WDT Watchdog timer' CONFIG_WDT   tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI   if [ "$CONFIG_WDT" != "n" ]; then      bool '    WDT501 features' CONFIG_WDT_501      if [ "$CONFIG_WDT_501" = "y" ]; then         bool '      Fan Tachometer' CONFIG_WDT_501_FAN      fi   fi   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT   tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT   if [ "$CONFIG_ARM" = "y" ]; then      dep_tristate '  DC21285 watchdog' CONFIG_21285_WATCHDOG $CONFIG_FOOTBRIDGE      dep_tristate '  NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG $CONFIG_ARCH_NETWINDER      dep_tristate '  SA1100 watchdog' CONFIG_SA1100_WATCHDOG $CONFIG_ARCH_SA1100   fi   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT   tristate '  IB700 SBC Watchdog Timer' CONFIG_IB700_WDT   tristate '  Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO   tristate '  Mixcom Watchdog' CONFIG_MIXCOMWD    tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT   tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT   tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDTfiendmenuif [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then   tristate 'NetWinder thermometer support' CONFIG_DS1620   tristate 'NetWinder Button' CONFIG_NWBUTTON   if [ "$CONFIG_NWBUTTON" != "n" ]; then      bool '  Reboot Using Button' CONFIG_NWBUTTON_REBOOT   fi   tristate 'NetWinder flash support' CONFIG_NWFLASHfidep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCItristate '/dev/nvram support' CONFIG_NVRAMtristate 'Enhanced Real Time Clock Support' CONFIG_RTCif [ "$CONFIG_IA64" = "y" ]; then   bool 'EFI Real Time Clock Services' CONFIG_EFI_RTCfiif [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then   bool 'Tadpole ANA H8 Support'  CONFIG_H8fiif [ "$CONFIG_ARCH_SA1100" = "y" ]; then   tristate 'SA1100 Real Time Clock' CONFIG_SA1100_RTCfitristate 'Double Talk PC internal speech card support' CONFIG_DTLKtristate 'Siemens R3964 line discipline' CONFIG_R3964tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOMif [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" ]; then   dep_tristate 'Sony Vaio Programmable I/O Control Device support' CONFIG_SONYPI $CONFIG_PCIfimainmenu_option next_commentcomment 'Ftape, the floppy tape device driver'tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPEif [ "$CONFIG_FTAPE" != "n" ]; then   source drivers/char/ftape/Config.infiendmenudep_tristate '/dev/agpgart (AGP Support)' CONFIG_AGP $CONFIG_DRM_AGPif [ "$CONFIG_AGP" != "n" ]; then   bool '  ALI chipset support' CONFIG_AGP_ALI   bool '  AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD   bool '  Generic SiS support' CONFIG_AGP_SIS   bool '  Intel 440LX/BX/GX and I815/I830/I840/I850/I860 support' CONFIG_AGP_INTEL   bool '  Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810   bool '  Serverworks LE/HE support' CONFIG_AGP_SWORKS   bool '  VIA chipset support' CONFIG_AGP_VIAfibool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRMif [ "$CONFIG_DRM" = "y" ]; then   bool '  Build drivers for new (XFree 4.1) DRM' CONFIG_DRM_NEW   if [ "$CONFIG_DRM_NEW" = "y" ]; then      comment 'DRM 4.1 drivers'      source drivers/char/drm/Config.in   else      comment 'DRM 4.0 drivers'      define_bool CONFIG_DRM_OLD y      source drivers/char/drm-4.0/Config.in   fifiif [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then   source drivers/char/pcmcia/Config.infiif [ "$CONFIG_MIPS_ITE8172" = "y" ]; then   tristate 'ITE GPIO' CONFIG_ITE_GPIOfiif [ "$CONFIG_X86" = "y" ]; then   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVEfiendmenu