/***********************************************************************************************************                                                uC/GUI*                        Universal graphic software for embedded applications**                       (c) Copyright 2002, Micrium Inc., Weston, FL*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH**              礐/GUI is protected by international copyright laws. Knowledge of the*              source code may not be used to write a similar product. This file may*              only be used in accordance with a license and should not be redistributed*              in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File        : GUI_X.CPurpose     : Config / System dependent externals for GUI---------------------------END-OF-HEADER------------------------------*/#include "GUI.h"#include "GUI_X.h"/***********************************************************************       Global data*/volatile int OS_TimeMS;/***********************************************************************      Timing:*                 GUI_X_GetTime()*                 GUI_X_Delay(int)  Some timing dependent routines of emWin require a GetTime  and delay function. Default time unit (tick), normally is  1 ms.*/int GUI_X_GetTime(void) {   return OS_TimeMS; }void GUI_X_Delay(int ms) {   int tEnd = OS_TimeMS + ms;  while ((tEnd - OS_TimeMS) > 0);}/***********************************************************************       GUI_X_Init()** Note:*     GUI_X_Init() is called from GUI_Init is a possibility to init*     some hardware which needs to be up and running before the GUI.*     If not required, leave this routine blank.*/void GUI_X_Init(void) {}/***********************************************************************       GUI_X_ExecIdle** Note:*  Called if WM is in idle state*/void GUI_X_ExecIdle(void) {}/***********************************************************************      Logging: Publics referenced by upper layers*Note:  These routines are needed only in higher debug levels.*/void GUI_X_Log(const char *s)   {}//以下函數沒有定義，編譯錯誤，加上void GUI_X_Unlock(void) {}void GUI_X_Lock(void) {}U32  GUI_X_GetTaskId(void) {}void GUI_X_InitOS(void) {}void GUI_X_Warn(const char *s) {}void GUI_X_ErrorOut(const char *s) {}