?? scanner.h
字號:
{ USB_DEVICE(0x05da, 0x30d8) }, /* ScanMaker 5900 */
{ USB_DEVICE(0x04a7, 0x0224) }, /* Scanport 3000 (actually Visioneer?)*/
/* The following SCSI-over-USB Microtek devices are supported by the
microtek driver: Enable SCSI and USB Microtek in kernel config */
// { USB_DEVICE(0x05da, 0x0099) }, /* ScanMaker X6 - X6U */
// { USB_DEVICE(0x05da, 0x0094) }, /* Phantom 336CX - C3 */
// { USB_DEVICE(0x05da, 0x00a0) }, /* Phantom 336CX - C3 #2 */
// { USB_DEVICE(0x05da, 0x009a) }, /* Phantom C6 */
// { USB_DEVICE(0x05da, 0x00a3) }, /* ScanMaker V6USL */
// { USB_DEVICE(0x05da, 0x80a3) }, /* ScanMaker V6USL #2 */
// { USB_DEVICE(0x05da, 0x80ac) }, /* ScanMaker V6UL - SpicyU */
/* Minolta */
{ USB_DEVICE(0x0686, 0x400d) }, /* Scan Dual III */
/* The following SCSI-over-USB Minolta devices are supported by the
hpusbscsi driver: Enable SCSI and USB hpusbscsi in kernel config */
// { USB_DEVICE(0x0638, 0x026a) }, /* Minolta Dimage Scan Dual II */
// { USB_DEVICE(0x0686, 0x4004) }, /* Scan Elite II (need interrupt ep) */
/* Mustek */
{ USB_DEVICE(0x0400, 0x1000) }, /* BearPaw 1200 (National Semiconductor LM9831) */
{ USB_DEVICE(0x0400, 0x1001) }, /* BearPaw 2400 (National Semiconductor LM9832) */
{ USB_DEVICE(0x055f, 0x0001) }, /* ScanExpress 1200 CU */
{ USB_DEVICE(0x055f, 0x0002) }, /* ScanExpress 600 CU */
{ USB_DEVICE(0x055f, 0x0003) }, /* ScanExpress 1200 USB */
{ USB_DEVICE(0x055f, 0x0006) }, /* ScanExpress 1200 UB */
{ USB_DEVICE(0x055f, 0x0007) }, /* ScanExpress 1200 USB Plus */
{ USB_DEVICE(0x055f, 0x0008) }, /* ScanExpress 1200 CU Plus */
{ USB_DEVICE(0x055f, 0x0010) }, /* BearPaw 1200F */
{ USB_DEVICE(0x055f, 0x0210) }, /* ScanExpress A3 USB */
{ USB_DEVICE(0x055f, 0x0218) }, /* BearPaw 2400 TA */
{ USB_DEVICE(0x055f, 0x0219) }, /* BearPaw 2400 TA Plus */
{ USB_DEVICE(0x055f, 0x021c) }, /* BearPaw 1200 CU Plus */
{ USB_DEVICE(0x055f, 0x021d) }, /* Bearpaw 2400 CU Plus */
{ USB_DEVICE(0x055f, 0x021e) }, /* BearPaw 1200 TA/CS */
{ USB_DEVICE(0x055f, 0x0400) }, /* BearPaw 2400 TA PRO */
{ USB_DEVICE(0x055f, 0x0401) }, /* P 3600 A3 Pro */
{ USB_DEVICE(0x055f, 0x0409) }, /* BearPaw 2448TA Pro */
{ USB_DEVICE(0x055f, 0x0873) }, /* ScanExpress 600 USB */
{ USB_DEVICE(0x055f, 0x1000) }, /* BearPaw 4800 TA PRO */
// { USB_DEVICE(0x05d8, 0x4002) }, /* BearPaw 1200 CU and ScanExpress 1200 UB Plus (see Artec) */
/* Nikon */
{ USB_DEVICE(0x04b0, 0x4000) }, /* Coolscan LS 40 ED */
/* Pacific Image Electronics */
{ USB_DEVICE(0x05e3, 0x0120) }, /* PrimeFilm 1800u */
/* Plustek */
{ USB_DEVICE(0x07b3, 0x0001) }, /* 1212U */
{ USB_DEVICE(0x07b3, 0x0005) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x0007) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x000F) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x0010) }, /* OpticPro U12 */
{ USB_DEVICE(0x07b3, 0x0011) }, /* OpticPro U24 */
{ USB_DEVICE(0x07b3, 0x0012) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x0013) }, /* UT12 */
{ USB_DEVICE(0x07b3, 0x0014) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x0015) }, /* OpticPro U24 */
{ USB_DEVICE(0x07b3, 0x0016) }, /* Unknown */
{ USB_DEVICE(0x07b3, 0x0017) }, /* OpticPro UT12/UT16/UT24 */
{ USB_DEVICE(0x07b3, 0x0400) }, /* OpticPro 1248U */
{ USB_DEVICE(0x07b3, 0x0401) }, /* OpticPro 1248U (another one) */
{ USB_DEVICE(0x07b3, 0x0403) }, /* U16B */
{ USB_DEVICE(0x07b3, 0x0413) }, /* OpticSlim 1200 */
/* Primax/Colorado */
{ USB_DEVICE(0x0461, 0x0300) }, /* G2-300 #1 */
{ USB_DEVICE(0x0461, 0x0301) }, /* G2E-300 #1 */
{ USB_DEVICE(0x0461, 0x0302) }, /* G2-300 #2 */
{ USB_DEVICE(0x0461, 0x0303) }, /* G2E-300 #2 */
{ USB_DEVICE(0x0461, 0x0340) }, /* Colorado USB 9600 */
{ USB_DEVICE(0x0461, 0x0341) }, /* Colorado 600u */
{ USB_DEVICE(0x0461, 0x0347) }, /* Primascan Colorado 2600u */
{ USB_DEVICE(0x0461, 0x0360) }, /* Colorado USB 19200 */
{ USB_DEVICE(0x0461, 0x0361) }, /* Colorado 1200u */
{ USB_DEVICE(0x0461, 0x0380) }, /* G2-600 #1 */
{ USB_DEVICE(0x0461, 0x0381) }, /* ReadyScan 636i */
{ USB_DEVICE(0x0461, 0x0382) }, /* G2-600 #2 */
{ USB_DEVICE(0x0461, 0x0383) }, /* G2E-600 */
/* Prolink */
{ USB_DEVICE(0x06dc, 0x0014) }, /* Winscan Pro 2448U */
/* Reflecta */
{ USB_DEVICE(0x05e3, 0x0120) }, /* iScan 1800 */
/* Relisis */
// { USB_DEVICE(0x0475, 0x0103) }, /* Episode - undetected endpoint */
{ USB_DEVICE(0x0475, 0x0210) }, /* Scorpio Ultra 3 */
/* Seiko/Epson Corp. */
{ USB_DEVICE(0x04b8, 0x0101) }, /* Perfection 636U and 636Photo */
{ USB_DEVICE(0x04b8, 0x0102) }, /* GT-2200 */
{ USB_DEVICE(0x04b8, 0x0103) }, /* Perfection 610 */
{ USB_DEVICE(0x04b8, 0x0104) }, /* Perfection 1200U and 1200Photo*/
{ USB_DEVICE(0x04b8, 0x0105) }, /* StylusScan 2000 */
{ USB_DEVICE(0x04b8, 0x0106) }, /* Stylus Scan 2500 */
{ USB_DEVICE(0x04b8, 0x0107) }, /* Expression 1600 */
{ USB_DEVICE(0x04b8, 0x0109) }, /* Expression 1640XL */
{ USB_DEVICE(0x04b8, 0x010a) }, /* Perfection 1640SU and 1640SU Photo */
{ USB_DEVICE(0x04b8, 0x010b) }, /* Perfection 1240U */
{ USB_DEVICE(0x04b8, 0x010c) }, /* Perfection 640U */
{ USB_DEVICE(0x04b8, 0x010e) }, /* Expression 1680 */
{ USB_DEVICE(0x04b8, 0x010f) }, /* Perfection 1250U */
{ USB_DEVICE(0x04b8, 0x0110) }, /* Perfection 1650 */
{ USB_DEVICE(0x04b8, 0x0112) }, /* Perfection 2450 - GT-9700 for the Japanese mkt */
{ USB_DEVICE(0x04b8, 0x0114) }, /* Perfection 660 */
{ USB_DEVICE(0x04b8, 0x011b) }, /* Perfection 2400 Photo */
{ USB_DEVICE(0x04b8, 0x011c) }, /* Perfection 3200 */
{ USB_DEVICE(0x04b8, 0x011d) }, /* Perfection 1260 */
{ USB_DEVICE(0x04b8, 0x011e) }, /* Perfection 1660 Photo */
{ USB_DEVICE(0x04b8, 0x011f) }, /* Perfection 1670 */
{ USB_DEVICE(0x04b8, 0x0801) }, /* Stylus CX5200 */
{ USB_DEVICE(0x04b8, 0x0802) }, /* Stylus CX3200 */
/* Siemens */
{ USB_DEVICE(0x0681, 0x0005) }, /* ID Mouse Professional */
{ USB_DEVICE(0x0681, 0x0010) }, /* Cherry FingerTIP ID Board - Sensor */
/* SYSCAN */
{ USB_DEVICE(0x0a82, 0x4600) }, /* TravelScan 460/464 */
/* Trust */
{ USB_DEVICE(0x05cb, 0x1483) }, /* CombiScan 19200 */
{ USB_DEVICE(0x05d8, 0x4006) }, /* Easy Webscan 19200 (repackaged Artec?) */
/* Umax */
{ USB_DEVICE(0x05d8, 0x4009) }, /* Astraslim (actually Artec?) */
{ USB_DEVICE(0x1606, 0x0010) }, /* Astra 1220U */
{ USB_DEVICE(0x1606, 0x0030) }, /* Astra 2000U */
{ USB_DEVICE(0x1606, 0x0060) }, /* Astra 3400U/3450U */
{ USB_DEVICE(0x1606, 0x0070) }, /* Astra 4400 */
{ USB_DEVICE(0x1606, 0x0130) }, /* Astra 2100U */
{ USB_DEVICE(0x1606, 0x0160) }, /* Astra 5400U */
{ USB_DEVICE(0x1606, 0x0230) }, /* Astra 2200U */
/* Visioneer */
{ USB_DEVICE(0x04a7, 0x0211) }, /* OneTouch 7600 USB */
{ USB_DEVICE(0x04a7, 0x0221) }, /* OneTouch 5300 USB */
{ USB_DEVICE(0x04a7, 0x0224) }, /* OneTouch 4800 USB */
{ USB_DEVICE(0x04a7, 0x0226) }, /* OneTouch 5800 USB */
{ USB_DEVICE(0x04a7, 0x0229) }, /* OneTouch 7100 USB */
{ USB_DEVICE(0x04a7, 0x022c) }, /* OneTouch 9020 USB */
{ USB_DEVICE(0x04a7, 0x0231) }, /* 6100 USB */
{ USB_DEVICE(0x04a7, 0x0311) }, /* 6200 EPP/USB */
{ USB_DEVICE(0x04a7, 0x0321) }, /* OneTouch 8100 EPP/USB */
{ USB_DEVICE(0x04a7, 0x0331) }, /* OneTouch 8600 EPP/USB */
{ USB_DEVICE(0x0461, 0x0345) }, /* 6200 (actually Primax?) */
{ USB_DEVICE(0x0461, 0x0371) }, /* Onetouch 8920 USB (actually Primax?) */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, scanner_device_ids);
#define IS_EP_BULK(ep) ((ep)->bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0)
#define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep)->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
#define IS_EP_BULK_OUT(ep) (IS_EP_BULK(ep) && ((ep)->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
#define IS_EP_INTR(ep) ((ep)->bmAttributes == USB_ENDPOINT_XFER_INT ? 1 : 0)
#define USB_SCN_MINOR(X) iminor(X)
#ifdef DEBUG
#define SCN_DEBUG(X) X
#else
#define SCN_DEBUG(X)
#endif
#define IBUF_SIZE 32768
#define OBUF_SIZE 4096
/* read_scanner timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */
#define RD_NAK_TIMEOUT (10*HZ) /* Default number of X seconds to wait */
#define RD_EXPIRE 12 /* Number of attempts to wait X seconds */
/* read vendor and product IDs from the scanner */
#define SCANNER_IOCTL_VENDOR _IOR('U', 0x20, int)
#define SCANNER_IOCTL_PRODUCT _IOR('U', 0x21, int)
/* send/recv a control message to the scanner */
#define SCANNER_IOCTL_CTRLMSG _IOWR('U', 0x22, struct usb_ctrlrequest)
/* USB bInterfaceClass used by Hewlett-Packard ScanJet 3300c and Genius HR6
USB - Vivid III */
#define SCN_CLASS_SCANJET 16
#define SCN_BASE_MNR 48 /* USB Scanners start at minor 48 */
static DECLARE_MUTEX (scn_mutex); /* Initializes to unlocked */
struct scn_usb_data {
struct usb_device *scn_dev;
struct urb *scn_irq;
unsigned int ifnum; /* Interface number of the USB device */
int scn_minor; /* Scanner minor - used in disconnect() */
unsigned char button; /* Front panel buffer */
char isopen; /* Not zero if the device is open */
char present; /* Not zero if device is present */
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep, intr_ep; /* Endpoint assignments */
wait_queue_head_t rd_wait_q; /* read timeouts */
struct semaphore sem; /* lock to prevent concurrent reads or writes */
unsigned int rd_nak_timeout; /* Seconds to wait before read() timeout. */
struct kobject kobj; /* Handles our reference counting */
};
#define to_scanner(d) container_of(d, struct scn_usb_data, kobj)
static struct usb_driver scanner_driver;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -