#include "eeb.h"

const char * Info[][2]={
	{"壓縮機","Compressor"},			//strCompressor
	{"壓 縮 機: 正在運行",""},			//strCompressor_NowOn,	
	{"對應觸點:",""},					//strCurrentRelay,
	{"BOHN雙吸氣并聯壓縮機組","BOHN dual suction parallel compressor"},	//strStartWndTitle,
	{"型號:[BMS-C-345L/240M]","Model:[BMS-C-345L/240M]"},//strStartWndModel			
	{"濰坊市圣榮精品超市","ShengYong super market"},//strStartWndProjectUse
	{"制造商:西克制冷(無錫)\n電話:021-62694857","Manufacturer:HEATCRAFT wuxi\nTel:021-62694857"},//strStartWndProducerInfo
	{"低溫飽和吸氣溫度","LT saturation temp"},//strStartWndLowSuckTemp
	{"中溫飽和吸氣溫度","MT saturation temp"},//strStartWndMidSuckTemp
	{"飽和冷凝溫度","Condenser saturation temp"},//strStartWndCoolerTemp
	{"低溫供液溫度","liquid temp"},//strStartWndLTLTemp
	{"進入","Enter"},		//strStartWndEnter
	////////////////////////////////////////////////////////////////
	{"請輸入密碼","Password"},		//strSOKBPleaseInputPassword
	{"密碼錯誤","Password error"},		//strSOKBPasswrokErr
	{"請重新輸入正確的密碼以進入系統!","Please input password again!"},//strSOKBReinputPassword
	{"清除","CLR"},// strSOKBClear
	{"確定","OK"},// strSOKBOK
	////////////////////////////////////////////////////////////////
	{"低溫壓縮機","LT"},//strMenuLT
	{"中溫壓縮機","MT"},//strMenuMT
	{"冷凝器","Condenser"},//strMenuCooler
	{"過冷器","Colder"},//strMenuColder
	{"報警","Warning"}, //strMenuWaring
	{"傳感器","Sensor"},//strMenuSensor
	{"密碼","Password"},//strMenuPassword
	{"通訊","Commucation"},//strMenuComm
	{"歷史紀錄","History"},//strMenuHis
	{"顯示","Display"},	//strMenuDisplay
	{"維修模式","Repair"},//strMenuRepair
	/////////////////////////////////////////////////////////////////
	{"主菜單","Control Panel"},//strMainControlPanel
	/////////////////////////////////////////////////////////////////
	{"語言設置","Language"},//strLanguageSet
	{"吸氣壓力設置點","Suction Pressure"},//strSuctionPress
	{"吸氣壓力調節帶寬(+/-)","Pressure Range"},//strSuctionPressRange
	{"壓縮機開機延時","Start Delay"},//strCompStartDelay
	{"壓縮機停止延時","Stop Delay"},//strCompStopDelay
	{"當前吸氣壓力","Current Suction Press"},	//strCurSucPress
	{"冷凝溫度","Condenser Temparature"},//strCoolerTemp
	{"供液溫度","Liquid Temparature"},//strLiqTemp
	{"排氣溫度","Exhaust Temparature"},//strAirTemp
	{"過熱度","OverHot Temparature"},//strOverHotTemp
	//////////////////////////////////////////////////////////////////
	{"冷凝器壓力設置","Condenser Pres"},//strCondenserPress
	{"壓力調節帶寬(+/-)","Pressure Range"},//strCondenserPressRange
	{"風扇開機延時","Fan start delay"},//strFanStartDelay
	{"風扇關機延時","Fan stop delay"},//strFanStartDelay
	{"請輸入%5.2f至%5.2f之間的數據!","This data must be between %5.2f and %5.2f!"},//strInValidInputWarnning
	{"輸入數據超出范圍","Invalid input"},//strInValidInputCap
	{" 確 定 ","  OK  "},// strMSGBOX_OK
	{"管理員密碼...","User Pass"},// strUserPass
	{"維修員密碼...","Admin Pass"},// strAdminPass
	{"管理員","Normal User"},// strUser
	{"維修員","Administrator"},// strAdmin
	{"管理員可以執行日常系統控制,維護,日志察看等基本操作","User can do routine maintenance,log check .etc"},
	{"維修員可以執行維修模式,系統設定等高級操作","Administrator can enter fix mode and config system."},//strAdminDesc
	{"請輸入管理員舊密碼:","Old Password:"},//strInputOldPass
	{"請輸入管理員新密碼:","New Password:"},//strInputNewPass
	{"請再輸入一遍:","New Password again:"},//strInputNewPassAgain
	{"管理員密碼已更改","Password changed"},//strPassChangeOK
	{"提示","Inform"},	//strPassChangeOKCap
    /////////////////////////////////////////////////////////////////////
    {"溫度0","Temp0"},//strFixTempIn0,
    {"溫度1","Temp1"},//strFixTempIn1,
    {"溫度2","Temp2"},//strFixTempIn2,
    {"溫度3","Temp3"},//strFixTempIn3,
    {"壓力0","Press0"},//strFixPressIn0,
    {"壓力1","Press1"},//strFixPressIn1,
    {"壓力2","Press2"},//strFixPressIn2,
    {"壓力3","Press3"},//strFixPressIn3,
    {"DI0","DI0"},//strFixDI0,
    {"DI1","DI1"},//strFixDI1,
    {"DI2","DI2"},//strFixDI2,
    {"DI3","DI3"},//strFixDI3,
    {"DI4","DI4"},//strFixDI4,
    {"DI5","DI5"},//strFixDI5,
    {"DI7","DI6"},//strFixDI6,
    {"DI6","DI7"},//strFixDI7,
    {"DO0","DO0"},//strFixDO0,
    {"DO1","DO1"},//strFixDO1,
    {"DO2","DO2"},//strFixDO2,
    {"DO3","DO3"},//strFixDO3,
    {"DO4","DO4"},//strFixDO4,
    {"DO5","DO5"},//strFixDO5,
    {"DO6","DO6"},//strFixDO6,
    {"DO7","DO7"},//strFixDO7,
    {"DO8","DO8"},//strFixDO8,
    {"DO9","DO9"},//strFixDO9,
    {"DOA","DOA"},//strFixDO10,
    {"DOB","DOB"},//strFixDO11,
    {"DOC","DOC"},//strFixDO12,
    {"DOD","DOD"},//strFixDO13,
    {"DOE","DOE"},//strFixDO14,
    {"DOF","DOF"},//strFixDO15,
};

LANG	g_LangInfo[]={
	"簡體中文 (Chinese) ",
	"English  (英文) ",
};

void SetLanguage(int nLanguage)
{
	g_SysInfo.w_Language = nLanguage;
}
LANG* GetLanguage(int nLanguage)
{
	if(nLanguage == -1)
	{
		nLanguage = g_SysInfo.w_Language;
	}
	if(nLanguage >= sizeof(g_LangInfo)/sizeof(LANG))
	{
		return NULL;
	}
	return &(g_LangInfo[nLanguage]);
}
const char * GetStringResource(STRINGID nIndex)
{
    DEBUG_Assert(_MAX_STRING_ > nIndex);
	return Info[nIndex][g_SysInfo.w_Language];
}