?? de2_default.tan.talkback.xml
字號:
<!--
This XML file (created on Mon Oct 01 08:37:37 2007) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature. To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder. For more information, go
to www.altera.com/products/software/download/dnl-download_license.html
-->
<talkback>
<ver>6.0</ver>
<schema>quartus_version_6.0_build_202.xsd</schema>
<license>
<host_id>00123f4b0b3f</host_id>
<nic_id>00123f4b0b3f</nic_id>
<cdrive_id>882dfa9e</cdrive_id>
</license>
<tool>
<name>Quartus II</name>
<version>6.0</version>
<build>Build 202</build>
<service_pack_label>1</service_pack_label>
<binary_type>32</binary_type>
<module>quartus_tan</module>
<edition>Web Edition</edition>
<eval>Licensed</eval>
<compilation_end_time>Mon Oct 01 08:37:37 2007</compilation_end_time>
</tool>
<machine>
<os>Windows XP</os>
<cpu>
<proc_count>2</proc_count>
<cpu_freq units="MHz">3391</cpu_freq>
</cpu>
<ram units="MB">1023</ram>
</machine>
<project>C:/DE2/NoiseCancel/DE2_Default</project>
<revision>DE2_Default</revision>
<compilation_summary>
<flow_status>Successful - Mon Oct 01 08:37:36 2007</flow_status>
<quartus_ii_version>6.0 Build 202 06/20/2006 SP 1 SJ Web Edition</quartus_ii_version>
<revision_name>DE2_Default</revision_name>
<top_level_entity_name>DE2_Default</top_level_entity_name>
<family>Cyclone II</family>
<device>EP2C35F672C6</device>
<timing_models>Final</timing_models>
<met_timing_requirements>Yes</met_timing_requirements>
<total_logic_elements>692 / 33,216 ( 2 % )</total_logic_elements>
<total_registers>476</total_registers>
<total_pins>429 / 475 ( 90 % )</total_pins>
<total_virtual_pins>0</total_virtual_pins>
<total_memory_bits>4,608 / 483,840 ( < 1 % )</total_memory_bits>
<embedded_multiplier_9_bit_elements>4 / 70 ( 6 % )</embedded_multiplier_9_bit_elements>
<total_plls>1 / 4 ( 25 % )</total_plls>
</compilation_summary>
<mep_data>
<command_line>quartus_tan --read_settings_files=off --write_settings_files=off DE2_Default -c DE2_Default --timing_analysis_only</command_line>
</mep_data>
<software_data>
<smart_recompile>off</smart_recompile>
</software_data>
<messages>
<warning>Warning: Found 3 node(s) in clock paths which may be acting as ripple and/or gated clocks -- node(s) analyzed as buffer(s) resulting in clock skew</warning>
<warning>Warning: Found pins functioning as undefined clocks and/or memory enables</warning>
<warning>Warning: Clock latency analysis for PLL offsets is supported for the current device family, but is not enabled</warning>
<info>Info: Quartus II Timing Analyzer was successful. 0 errors, 3 warnings</info>
<info>Info: Elapsed time: 00:00:01</info>
<info>Info: Processing ended: Mon Oct 01 08:37:36 2007</info>
<info>Info: All timing requirements were met. See Report window for more details.</info>
<info>Info: th for register "sld_hub:sld_hub_inst|sld_dffex:IRSR|Q[8]" (data pin = "altera_internal_jtag", clock pin = "altera_internal_jtag~TCKUTAP") is 1.740 ns</info>
</messages>
<clock_settings_summary>
<row>
<clock_node_name>VGA_Audio_PLL:p1|altpll:altpll_component|_clk1</clock_node_name>
<type>PLL output</type>
<fmax_requirement units="MHz">18.0</fmax_requirement>
<early_latency units="ns">0.000</early_latency>
<late_latency units="ns">0.000</late_latency>
<based_on>CLOCK_27</based_on>
<multiply_base_fmax_by>2</multiply_base_fmax_by>
<divide_base_fmax_by>3</divide_base_fmax_by>
<offset units="ns">-2.384</offset>
</row>
<row>
<clock_node_name>VGA_Audio_PLL:p1|altpll:altpll_component|_clk2</clock_node_name>
<type>PLL output</type>
<fmax_requirement units="MHz">25.2</fmax_requirement>
<early_latency units="ns">0.000</early_latency>
<late_latency units="ns">0.000</late_latency>
<based_on>CLOCK_27</based_on>
<multiply_base_fmax_by>14</multiply_base_fmax_by>
<divide_base_fmax_by>15</divide_base_fmax_by>
<offset units="ns">-12.306</offset>
</row>
<row>
<clock_node_name>CLOCK_27</clock_node_name>
<type>User Pin</type>
<fmax_requirement units="MHz">27.0</fmax_requirement>
<early_latency units="ns">0.000</early_latency>
<late_latency units="ns">0.000</late_latency>
<multiply_base_fmax_by>N/A</multiply_base_fmax_by>
<divide_base_fmax_by>N/A</divide_base_fmax_by>
<offset>N/A</offset>
</row>
<row>
<clock_node_name>CLOCK_50</clock_node_name>
<type>User Pin</type>
<fmax_requirement>None</fmax_requirement>
<early_latency units="ns">0.000</early_latency>
<late_latency units="ns">0.000</late_latency>
<multiply_base_fmax_by>N/A</multiply_base_fmax_by>
<divide_base_fmax_by>N/A</divide_base_fmax_by>
<offset>N/A</offset>
</row>
<row>
<clock_node_name>altera_internal_jtag~TCKUTAP</clock_node_name>
<type>User Pin</type>
<fmax_requirement>None</fmax_requirement>
<early_latency units="ns">0.000</early_latency>
<late_latency units="ns">0.000</late_latency>
<multiply_base_fmax_by>N/A</multiply_base_fmax_by>
<divide_base_fmax_by>N/A</divide_base_fmax_by>
<offset>N/A</offset>
</row>
</clock_settings_summary>
<performance>
<nonclk>
<type>Worst-case tsu</type>
<slack>N/A</slack>
<required>None</required>
<actual>6.650 ns</actual>
</nonclk>
<nonclk>
<type>Worst-case tco</type>
<slack>N/A</slack>
<required>None</required>
<actual>14.609 ns</actual>
</nonclk>
<nonclk>
<type>Worst-case tpd</type>
<slack>N/A</slack>
<required>None</required>
<actual>2.612 ns</actual>
</nonclk>
<nonclk>
<type>Worst-case th</type>
<slack>N/A</slack>
<required>None</required>
<actual>1.740 ns</actual>
</nonclk>
<clk>
<name>CLOCK_27</name>
<slack>0.500 ns</slack>
<required>27.00 MHz ( period = 37.037 ns )</required>
<actual>N/A</actual>
</clk>
<clk>
<name>VGA_Audio_PLL:p1|altpll:altpll_component|_clk1</name>
<slack>8.568 ns</slack>
<required>18.00 MHz ( period = 55.555 ns )</required>
<actual>N/A</actual>
</clk>
<clk>
<name>altera_internal_jtag~TCKUTAP</name>
<slack>N/A</slack>
<required>None</required>
<actual>143.18 MHz ( period = 6.984 ns )</actual>
</clk>
<clk>
<name>CLOCK_50</name>
<slack>N/A</slack>
<required>None</required>
<actual>167.11 MHz ( period = 5.984 ns )</actual>
</clk>
</performance>
</talkback>
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -