-- Copyright (C) 1991-2006 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions 
-- and other software and tools, and its AMPP partner logic 
-- functions, and any output files any of the foregoing 
-- (including device programming or simulation files), and any 
-- associated documentation or information are expressly subject 
-- to the terms and conditions of the Altera Program License 
-- Subscription Agreement, Altera MegaCore Function License 
-- Agreement, or other applicable license agreement, including, 
-- without limitation, that your use is for the sole purpose of 
-- programming logic devices manufactured by Altera and sold by 
-- Altera or its authorized distributors.  Please refer to the 
-- applicable agreement for further details.
--B1_CLK7279 is hd7279:inst|CLK7279 at LC_X31_Y11_N3
--operation mode is normal

B1_CLK7279_lut_out = B1_CLK7279 & (B1_state.finish # B1L223) # !B1L224;
B1_CLK7279 = DFFEAS(B1_CLK7279_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_t is hd7279:inst|t at LC_X37_Y13_N5
--operation mode is normal

B1_t_lut_out = B1_t $ (B1L187 & B1L182);
B1_t = DFFEAS(B1_t_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_CS7279 is hd7279:inst|CS7279 at LC_X31_Y11_N8
--operation mode is normal

B1_CS7279_lut_out = !B1_state.finish & (B1_state.start # B1_CS7279);
B1_CS7279 = DFFEAS(B1_CS7279_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--C1_current_state.st2 is ADC0809:inst3|current_state.st2 at LC_X8_Y13_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_current_state.st2_lut_out = GND;
C1_current_state.st2 = DFFEAS(C1_current_state.st2_lut_out, GLOBAL(C1_t), GLOBAL(RST_N), , , C1_current_state.st1, , , VCC);


--C1_current_state.st1 is ADC0809:inst3|current_state.st1 at LC_X8_Y13_N2
--operation mode is normal

C1_current_state.st1_lut_out = !C1_current_state.st0;
C1_current_state.st1 = DFFEAS(C1_current_state.st1_lut_out, GLOBAL(C1_t), GLOBAL(RST_N), , , , , , );


--C1_current_state.st5 is ADC0809:inst3|current_state.st5 at LC_X8_Y13_N7
--operation mode is normal

C1_current_state.st5_lut_out = eoc & (C1_current_state.st4);
C1_current_state.st5 = DFFEAS(C1_current_state.st5_lut_out, GLOBAL(C1_t), GLOBAL(RST_N), , , , , , );


--C1_en is ADC0809:inst3|en at LC_X8_Y13_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_current_state.st6_qfbk = C1_current_state.st6;
C1_en = C1_current_state.st5 # C1_current_state.st6_qfbk;

--C1_current_state.st6 is ADC0809:inst3|current_state.st6 at LC_X8_Y13_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_current_state.st6 = DFFEAS(C1_en, GLOBAL(C1_t), GLOBAL(RST_N), , , C1_current_state.st5, , , VCC);


--C1_t1 is ADC0809:inst3|t1 at LC_X23_Y9_N7
--operation mode is normal

C1_t1_lut_out = C1_t1 $ (C1L319 & C1L324);
C1_t1 = DFFEAS(C1_t1_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_state.finish is hd7279:inst|state.finish at LC_X31_Y11_N9
--operation mode is normal

B1_state.finish_lut_out = B1L194 & (B1_state.shift_key_high1 # B1_state.shift_data_high);
B1_state.finish = DFFEAS(B1_state.finish_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_state.start_delay is hd7279:inst|state.start_delay at LC_X29_Y11_N4
--operation mode is normal

B1_state.start_delay_lut_out = B1_state.start # B1_state.start_delay & B1_delay_cnt[1];
B1_state.start_delay = DFFEAS(B1_state.start_delay_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_state.next_delay is hd7279:inst|state.next_delay at LC_X31_Y10_N9
--operation mode is normal

B1_state.next_delay_lut_out = B1_delay_cnt[1] & (B1_state.next_delay # B1_state.shift_cmd_high & B1L225) # !B1_delay_cnt[1] & (B1_state.shift_cmd_high & B1L225);
B1_state.next_delay = DFFEAS(B1_state.next_delay_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_state.idle is hd7279:inst|state.idle at LC_X30_Y10_N5
--operation mode is normal

B1_state.idle_lut_out = !B1_state.finish;
B1_state.idle = DFFEAS(B1_state.idle_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1L223 is hd7279:inst|Select~1297 at LC_X30_Y11_N5
--operation mode is normal

B1L223 = B1_state.shift_key_high # B1_state.start_delay # B1_state.next_delay # !B1_state.idle;


--B1_state.shift_cmd_low is hd7279:inst|state.shift_cmd_low at LC_X30_Y10_N0
--operation mode is normal

B1_state.shift_cmd_low_lut_out = !B1L226;
B1_state.shift_cmd_low = DFFEAS(B1_state.shift_cmd_low_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_state.shift_data_low is hd7279:inst|state.shift_data_low at LC_X30_Y10_N3
--operation mode is normal

B1_state.shift_data_low_lut_out = B1L194 & !B1L228 & B1L227 # !B1L194 & (B1_state.shift_data_high # !B1L228 & B1L227);
B1_state.shift_data_low = DFFEAS(B1_state.shift_data_low_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1_state.shift_key_low is hd7279:inst|state.shift_key_low at LC_X30_Y10_N8
--operation mode is normal

B1_state.shift_key_low_lut_out = B1L194 & (B1L227 & B1L228) # !B1L194 & (B1_state.shift_key_high1 # B1L227 & B1L228);
B1_state.shift_key_low = DFFEAS(B1_state.shift_key_low_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--B1L224 is hd7279:inst|Select~1298 at LC_X30_Y10_N7
--operation mode is normal

B1L224 = !B1_state.shift_cmd_low & !B1_state.shift_key_low & !B1_state.shift_data_low;


--B1_count[30] is hd7279:inst|count[30] at LC_X37_Y14_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[30]_lut_out = GND;
B1_count[30] = DFFEAS(B1_count[30]_lut_out, GLOBAL(clk), VCC, , , B1L2, , , VCC);


--B1_count[29] is hd7279:inst|count[29] at LC_X37_Y14_N6
--operation mode is normal

B1_count[29]_lut_out = B1L4;
B1_count[29] = DFFEAS(B1_count[29]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[28] is hd7279:inst|count[28] at LC_X37_Y14_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[28]_lut_out = GND;
B1_count[28] = DFFEAS(B1_count[28]_lut_out, GLOBAL(clk), VCC, , , B1L7, , , VCC);


--B1L178 is hd7279:inst|Equal~450 at LC_X37_Y14_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[31]_qfbk = B1_count[31];
B1L178 = !B1_count[30] & !B1_count[29] & !B1_count[31]_qfbk & !B1_count[28];

--B1_count[31] is hd7279:inst|count[31] at LC_X37_Y14_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[31] = DFFEAS(B1L178, GLOBAL(clk), VCC, , , B1L1, , , VCC);


--B1_count[26] is hd7279:inst|count[26] at LC_X37_Y13_N1
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[26]_lut_out = GND;
B1_count[26] = DFFEAS(B1_count[26]_lut_out, GLOBAL(clk), VCC, , , B1L13, , , VCC);


--B1_count[25] is hd7279:inst|count[25] at LC_X38_Y13_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[25]_lut_out = GND;
B1_count[25] = DFFEAS(B1_count[25]_lut_out, GLOBAL(clk), VCC, , , B1L16, , , VCC);


--B1_count[24] is hd7279:inst|count[24] at LC_X38_Y15_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[24]_lut_out = GND;
B1_count[24] = DFFEAS(B1_count[24]_lut_out, GLOBAL(clk), VCC, , , B1L18, , , VCC);


--B1L179 is hd7279:inst|Equal~451 at LC_X37_Y13_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[27]_qfbk = B1_count[27];
B1L179 = !B1_count[26] & !B1_count[24] & !B1_count[27]_qfbk & !B1_count[25];

--B1_count[27] is hd7279:inst|count[27] at LC_X37_Y13_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[27] = DFFEAS(B1L179, GLOBAL(clk), VCC, , , B1L10, , , VCC);


--B1_count[22] is hd7279:inst|count[22] at LC_X36_Y15_N2
--operation mode is normal

B1_count[22]_lut_out = B1L24;
B1_count[22] = DFFEAS(B1_count[22]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[21] is hd7279:inst|count[21] at LC_X36_Y16_N2
--operation mode is normal

B1_count[21]_lut_out = B1L27;
B1_count[21] = DFFEAS(B1_count[21]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[20] is hd7279:inst|count[20] at LC_X38_Y14_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[20]_lut_out = GND;
B1_count[20] = DFFEAS(B1_count[20]_lut_out, GLOBAL(clk), VCC, , , B1L30, , , VCC);


--B1L180 is hd7279:inst|Equal~452 at LC_X37_Y13_N0
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[23]_qfbk = B1_count[23];
B1L180 = !B1_count[20] & !B1_count[22] & !B1_count[23]_qfbk & !B1_count[21];

--B1_count[23] is hd7279:inst|count[23] at LC_X37_Y13_N0
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[23] = DFFEAS(B1L180, GLOBAL(clk), VCC, , , B1L21, , , VCC);


--B1_count[18] is hd7279:inst|count[18] at LC_X37_Y12_N2
--operation mode is normal

B1_count[18]_lut_out = B1L35;
B1_count[18] = DFFEAS(B1_count[18]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[17] is hd7279:inst|count[17] at LC_X36_Y14_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[17]_lut_out = GND;
B1_count[17] = DFFEAS(B1_count[17]_lut_out, GLOBAL(clk), VCC, , , B1L38, , , VCC);


--B1_count[16] is hd7279:inst|count[16] at LC_X37_Y18_N2
--operation mode is normal

B1_count[16]_lut_out = B1L41;
B1_count[16] = DFFEAS(B1_count[16]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1L181 is hd7279:inst|Equal~453 at LC_X37_Y13_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[19]_qfbk = B1_count[19];
B1L181 = !B1_count[17] & !B1_count[16] & !B1_count[19]_qfbk & !B1_count[18];

--B1_count[19] is hd7279:inst|count[19] at LC_X37_Y13_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[19] = DFFEAS(B1L181, GLOBAL(clk), VCC, , , B1L32, , , VCC);


--B1L182 is hd7279:inst|Equal~454 at LC_X37_Y13_N8
--operation mode is normal

B1L182 = B1L178 & B1L180 & B1L181 & B1L179;


--B1_count[14] is hd7279:inst|count[14] at LC_X38_Y16_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[14]_lut_out = GND;
B1_count[14] = DFFEAS(B1_count[14]_lut_out, GLOBAL(clk), VCC, , , B1L46, , , VCC);


--B1_count[13] is hd7279:inst|count[13] at LC_X38_Y16_N2
--operation mode is normal

B1_count[13]_lut_out = B1L49;
B1_count[13] = DFFEAS(B1_count[13]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[12] is hd7279:inst|count[12] at LC_X38_Y16_N5
--operation mode is normal

B1_count[12]_lut_out = B1L52;
B1_count[12] = DFFEAS(B1_count[12]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1L183 is hd7279:inst|Equal~455 at LC_X38_Y16_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[15]_qfbk = B1_count[15];
B1L183 = !B1_count[13] & !B1_count[14] & !B1_count[15]_qfbk & !B1_count[12];

--B1_count[15] is hd7279:inst|count[15] at LC_X38_Y16_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[15] = DFFEAS(B1L183, GLOBAL(clk), VCC, , , B1L44, , , VCC);


--B1_count[10] is hd7279:inst|count[10] at LC_X39_Y16_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[10]_lut_out = GND;
B1_count[10] = DFFEAS(B1_count[10]_lut_out, GLOBAL(clk), VCC, , , B1L58, , , VCC);


--B1_count[9] is hd7279:inst|count[9] at LC_X39_Y16_N5
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[9]_lut_out = GND;
B1_count[9] = DFFEAS(B1_count[9]_lut_out, GLOBAL(clk), VCC, , , B1L60, , , VCC);


--B1_count[8] is hd7279:inst|count[8] at LC_X39_Y16_N4
--operation mode is normal

B1_count[8]_lut_out = B1L63;
B1_count[8] = DFFEAS(B1_count[8]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1L184 is hd7279:inst|Equal~456 at LC_X39_Y16_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[11]_qfbk = B1_count[11];
B1L184 = !B1_count[10] & !B1_count[9] & !B1_count[11]_qfbk & !B1_count[8];

--B1_count[11] is hd7279:inst|count[11] at LC_X39_Y16_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[11] = DFFEAS(B1L184, GLOBAL(clk), VCC, , , B1L55, , , VCC);


--B1_count[7] is hd7279:inst|count[7] at LC_X37_Y13_N6
--operation mode is normal

B1_count[7]_lut_out = B1L66 & (!B1L187 # !B1L182);
B1_count[7] = DFFEAS(B1_count[7]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[6] is hd7279:inst|count[6] at LC_X37_Y13_N3
--operation mode is normal

B1_count[6]_lut_out = B1L69 & (!B1L187 # !B1L182);
B1_count[6] = DFFEAS(B1_count[6]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[4] is hd7279:inst|count[4] at LC_X37_Y17_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[4]_lut_out = GND;
B1_count[4] = DFFEAS(B1_count[4]_lut_out, GLOBAL(clk), VCC, , , B1L74, , , VCC);


--B1L185 is hd7279:inst|Equal~457 at LC_X36_Y17_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[5]_qfbk = B1_count[5];
B1L185 = !B1_count[4] & B1_count[6] & !B1_count[5]_qfbk & B1_count[7];

--B1_count[5] is hd7279:inst|count[5] at LC_X36_Y17_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[5] = DFFEAS(B1L185, GLOBAL(clk), VCC, , , B1L72, , , VCC);


--B1_count[3] is hd7279:inst|count[3] at LC_X37_Y17_N0
--operation mode is normal

B1_count[3]_lut_out = B1L77 & (!B1L187 # !B1L182);