B1_count[3] = DFFEAS(B1_count[3]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[1] is hd7279:inst|count[1] at LC_X37_Y17_N1
--operation mode is normal

B1_count[1]_lut_out = B1L83;
B1_count[1] = DFFEAS(B1_count[1]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1_count[0] is hd7279:inst|count[0] at LC_X37_Y13_N4
--operation mode is normal

B1_count[0]_lut_out = B1L86 & (!B1L182 # !B1L187);
B1_count[0] = DFFEAS(B1_count[0]_lut_out, GLOBAL(clk), VCC, , , , , , );


--B1L186 is hd7279:inst|Equal~458 at LC_X37_Y17_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[2]_qfbk = B1_count[2];
B1L186 = !B1_count[1] & !B1_count[0] & !B1_count[2]_qfbk & B1_count[3];

--B1_count[2] is hd7279:inst|count[2] at LC_X37_Y17_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

B1_count[2] = DFFEAS(B1L186, GLOBAL(clk), VCC, , , B1L80, , , VCC);


--B1L187 is hd7279:inst|Equal~459 at LC_X37_Y13_N2
--operation mode is normal

B1L187 = B1L183 & B1L185 & B1L184 & B1L186;


--B1_state.start is hd7279:inst|state.start at LC_X31_Y11_N2
--operation mode is normal

B1_state.start_lut_out = !B1_state.idle;
B1_state.start = DFFEAS(B1_state.start_lut_out, GLOBAL(B1_t), GLOBAL(RST_N), , , , , , );


--C1_t is ADC0809:inst3|t at LC_X15_Y13_N4
--operation mode is normal

C1_t_lut_out = C1_t $ (C1L334 & C1L329);
C1_t = DFFEAS(C1_t_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_current_state.st0 is ADC0809:inst3|current_state.st0 at LC_X8_Y13_N5
--operation mode is normal

C1_current_state.st0_lut_out = !C1_current_state.st6;
C1_current_state.st0 = DFFEAS(C1_current_state.st0_lut_out, GLOBAL(C1_t), GLOBAL(RST_N), , , , , , );


--C1_current_state.st4 is ADC0809:inst3|current_state.st4 at LC_X8_Y13_N6
--operation mode is normal

C1_current_state.st4_lut_out = !eoc & (C1_current_state.st3 # C1_current_state.st4);
C1_current_state.st4 = DFFEAS(C1_current_state.st4_lut_out, GLOBAL(C1_t), GLOBAL(RST_N), , , , , , );


--C1_count11[30] is ADC0809:inst3|count11[30] at LC_X22_Y8_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[30]_lut_out = GND;
C1_count11[30] = DFFEAS(C1_count11[30]_lut_out, GLOBAL(clk), VCC, , , C1L2, , , VCC);


--C1_count11[29] is ADC0809:inst3|count11[29] at LC_X22_Y8_N9
--operation mode is normal

C1_count11[29]_lut_out = C1L4;
C1_count11[29] = DFFEAS(C1_count11[29]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[28] is ADC0809:inst3|count11[28] at LC_X22_Y8_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[28]_lut_out = GND;
C1_count11[28] = DFFEAS(C1_count11[28]_lut_out, GLOBAL(clk), VCC, , , C1L7, , , VCC);


--C1L315 is ADC0809:inst3|Equal~706 at LC_X22_Y8_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[31]_qfbk = C1_count11[31];
C1L315 = !C1_count11[29] & !C1_count11[30] & !C1_count11[31]_qfbk & !C1_count11[28];

--C1_count11[31] is ADC0809:inst3|count11[31] at LC_X22_Y8_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[31] = DFFEAS(C1L315, GLOBAL(clk), VCC, , , C1L1, , , VCC);


--C1_count11[26] is ADC0809:inst3|count11[26] at LC_X23_Y9_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[26]_lut_out = GND;
C1_count11[26] = DFFEAS(C1_count11[26]_lut_out, GLOBAL(clk), VCC, , , C1L13, , , VCC);


--C1_count11[25] is ADC0809:inst3|count11[25] at LC_X23_Y9_N0
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[25]_lut_out = GND;
C1_count11[25] = DFFEAS(C1_count11[25]_lut_out, GLOBAL(clk), VCC, , , C1L16, , , VCC);


--C1_count11[24] is ADC0809:inst3|count11[24] at LC_X18_Y9_N2
--operation mode is normal

C1_count11[24]_lut_out = C1L18;
C1_count11[24] = DFFEAS(C1_count11[24]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1L316 is ADC0809:inst3|Equal~707 at LC_X23_Y9_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[27]_qfbk = C1_count11[27];
C1L316 = !C1_count11[24] & !C1_count11[26] & !C1_count11[27]_qfbk & !C1_count11[25];

--C1_count11[27] is ADC0809:inst3|count11[27] at LC_X23_Y9_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[27] = DFFEAS(C1L316, GLOBAL(clk), VCC, , , C1L10, , , VCC);


--C1_count11[22] is ADC0809:inst3|count11[22] at LC_X21_Y8_N2
--operation mode is normal

C1_count11[22]_lut_out = C1L24;
C1_count11[22] = DFFEAS(C1_count11[22]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[21] is ADC0809:inst3|count11[21] at LC_X21_Y11_N2
--operation mode is normal

C1_count11[21]_lut_out = C1L27;
C1_count11[21] = DFFEAS(C1_count11[21]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[20] is ADC0809:inst3|count11[20] at LC_X18_Y8_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[20]_lut_out = GND;
C1_count11[20] = DFFEAS(C1_count11[20]_lut_out, GLOBAL(clk), VCC, , , C1L30, , , VCC);


--C1L317 is ADC0809:inst3|Equal~708 at LC_X23_Y9_N1
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[23]_qfbk = C1_count11[23];
C1L317 = !C1_count11[20] & !C1_count11[21] & !C1_count11[23]_qfbk & !C1_count11[22];

--C1_count11[23] is ADC0809:inst3|count11[23] at LC_X23_Y9_N1
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[23] = DFFEAS(C1L317, GLOBAL(clk), VCC, , , C1L21, , , VCC);


--C1_count11[18] is ADC0809:inst3|count11[18] at LC_X21_Y9_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[18]_lut_out = GND;
C1_count11[18] = DFFEAS(C1_count11[18]_lut_out, GLOBAL(clk), VCC, , , C1L35, , , VCC);


--C1_count11[17] is ADC0809:inst3|count11[17] at LC_X24_Y9_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[17]_lut_out = GND;
C1_count11[17] = DFFEAS(C1_count11[17]_lut_out, GLOBAL(clk), VCC, , , C1L38, , , VCC);


--C1_count11[16] is ADC0809:inst3|count11[16] at LC_X23_Y11_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[16]_lut_out = GND;
C1_count11[16] = DFFEAS(C1_count11[16]_lut_out, GLOBAL(clk), VCC, , , C1L41, , , VCC);


--C1L318 is ADC0809:inst3|Equal~709 at LC_X23_Y9_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[19]_qfbk = C1_count11[19];
C1L318 = !C1_count11[18] & !C1_count11[16] & !C1_count11[19]_qfbk & !C1_count11[17];

--C1_count11[19] is ADC0809:inst3|count11[19] at LC_X23_Y9_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[19] = DFFEAS(C1L318, GLOBAL(clk), VCC, , , C1L32, , , VCC);


--C1L319 is ADC0809:inst3|Equal~710 at LC_X23_Y9_N2
--operation mode is normal

C1L319 = C1L318 & C1L315 & C1L316 & C1L317;


--C1_count11[14] is ADC0809:inst3|count11[14] at LC_X23_Y10_N8
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[14]_lut_out = GND;
C1_count11[14] = DFFEAS(C1_count11[14]_lut_out, GLOBAL(clk), VCC, , , C1L46, , , VCC);


--C1_count11[13] is ADC0809:inst3|count11[13] at LC_X23_Y10_N5
--operation mode is normal

C1_count11[13]_lut_out = C1L49;
C1_count11[13] = DFFEAS(C1_count11[13]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[12] is ADC0809:inst3|count11[12] at LC_X23_Y10_N6
--operation mode is normal

C1_count11[12]_lut_out = C1L52;
C1_count11[12] = DFFEAS(C1_count11[12]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1L320 is ADC0809:inst3|Equal~711 at LC_X23_Y10_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[15]_qfbk = C1_count11[15];
C1L320 = !C1_count11[13] & !C1_count11[14] & !C1_count11[15]_qfbk & !C1_count11[12];

--C1_count11[15] is ADC0809:inst3|count11[15] at LC_X23_Y10_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[15] = DFFEAS(C1L320, GLOBAL(clk), VCC, , , C1L44, , , VCC);


--C1_count11[10] is ADC0809:inst3|count11[10] at LC_X21_Y10_N4
--operation mode is normal

C1_count11[10]_lut_out = C1L58;
C1_count11[10] = DFFEAS(C1_count11[10]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[9] is ADC0809:inst3|count11[9] at LC_X21_Y10_N2
--operation mode is normal

C1_count11[9]_lut_out = C1L60;
C1_count11[9] = DFFEAS(C1_count11[9]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[8] is ADC0809:inst3|count11[8] at LC_X21_Y10_N5
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[8]_lut_out = GND;
C1_count11[8] = DFFEAS(C1_count11[8]_lut_out, GLOBAL(clk), VCC, , , C1L63, , , VCC);


--C1L321 is ADC0809:inst3|Equal~712 at LC_X21_Y10_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[11]_qfbk = C1_count11[11];
C1L321 = !C1_count11[9] & !C1_count11[10] & !C1_count11[11]_qfbk & !C1_count11[8];

--C1_count11[11] is ADC0809:inst3|count11[11] at LC_X21_Y10_N6
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[11] = DFFEAS(C1L321, GLOBAL(clk), VCC, , , C1L55, , , VCC);


--C1_count11[5] is ADC0809:inst3|count11[5] at LC_X23_Y9_N3
--operation mode is normal

C1_count11[5]_lut_out = C1L66 & (!C1L319 # !C1L324);
C1_count11[5] = DFFEAS(C1_count11[5]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[4] is ADC0809:inst3|count11[4] at LC_X22_Y11_N0
--operation mode is normal

C1_count11[4]_lut_out = C1L68 & (!C1L324 # !C1L319);
C1_count11[4] = DFFEAS(C1_count11[4]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[6] is ADC0809:inst3|count11[6] at LC_X24_Y10_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[6]_lut_out = GND;
C1_count11[6] = DFFEAS(C1_count11[6]_lut_out, GLOBAL(clk), VCC, , , C1L74, , , VCC);


--C1L322 is ADC0809:inst3|Equal~713 at LC_X24_Y10_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[7]_qfbk = C1_count11[7];
C1L322 = C1_count11[4] & C1_count11[5] & !C1_count11[7]_qfbk & !C1_count11[6];

--C1_count11[7] is ADC0809:inst3|count11[7] at LC_X24_Y10_N4
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[7] = DFFEAS(C1L322, GLOBAL(clk), VCC, , , C1L71, , , VCC);


--C1_count11[1] is ADC0809:inst3|count11[1] at LC_X22_Y11_N2
--operation mode is normal

C1_count11[1]_lut_out = C1L77 & (!C1L319 # !C1L324);
C1_count11[1] = DFFEAS(C1_count11[1]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[2] is ADC0809:inst3|count11[2] at LC_X22_Y11_N1
--operation mode is normal

C1_count11[2]_lut_out = C1L83;
C1_count11[2] = DFFEAS(C1_count11[2]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1_count11[0] is ADC0809:inst3|count11[0] at LC_X23_Y9_N6
--operation mode is normal

C1_count11[0]_lut_out = C1L86 & (!C1L319 # !C1L324);
C1_count11[0] = DFFEAS(C1_count11[0]_lut_out, GLOBAL(clk), VCC, , , , , , );


--C1L323 is ADC0809:inst3|Equal~714 at LC_X22_Y11_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[3]_qfbk = C1_count11[3];
C1L323 = !C1_count11[2] & C1_count11[1] & !C1_count11[3]_qfbk & !C1_count11[0];

--C1_count11[3] is ADC0809:inst3|count11[3] at LC_X22_Y11_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

C1_count11[3] = DFFEAS(C1L323, GLOBAL(clk), VCC, , , C1L80, , , VCC);


--C1L324 is ADC0809:inst3|Equal~715 at LC_X23_Y9_N5
--operation mode is normal

C1L324 = C1L322 & C1L321 & C1L323 & C1L320;


--B1_key_7279_tmp[2] is hd7279:inst|key_7279_tmp[2] at LC_X31_Y11_N7
--operation mode is normal

B1_key_7279_tmp[2]_lut_out = B1L170 & (B1_sdata_cnt[0] & (B1_key_7279_tmp[2]) # !B1_sdata_cnt[0] & A1L21) # !B1L170 & (B1_key_7279_tmp[2]);
B1_key_7279_tmp[2] = DFFEAS(B1_key_7279_tmp[2]_lut_out, GLOBAL(B1_t), VCC, , , , , , );


--B1_sdata_cnt[2] is hd7279:inst|sdata_cnt[2] at LC_X30_Y9_N5
--operation mode is normal

B1_sdata_cnt[2]_lut_out = B1L218 & (B1_state.next_delay # B1_sdata_cnt[2] $ B1L171) # !B1L218 & (B1_sdata_cnt[2]);
B1_sdata_cnt[2] = DFFEAS(B1_sdata_cnt[2]_lut_out, GLOBAL(B1_t), VCC, , , , , , );


--B1_sdata_cnt[1] is hd7279:inst|sdata_cnt[1] at LC_X30_Y11_N4
--operation mode is normal

B1_sdata_cnt[1]_lut_out = B1_state.next_delay # B1_sdata_cnt[1] $ !B1_sdata_cnt[0];
B1_sdata_cnt[1] = DFFEAS(B1_sdata_cnt[1]_lut_out, GLOBAL(B1_t), VCC, , B1L218, , , , );


--B1_sdata_cnt[0] is hd7279:inst|sdata_cnt[0] at LC_X30_Y11_N8
--operation mode is normal

B1_sdata_cnt[0]_lut_out = B1_state.next_delay # !B1_sdata_cnt[0];
B1_sdata_cnt[0] = DFFEAS(B1_sdata_cnt[0]_lut_out, GLOBAL(B1_t), VCC, , B1L218, , , , );


--B1L194 is hd7279:inst|key_7279[2]~194 at LC_X30_Y9_N4
--operation mode is normal

B1L194 = !B1_sdata_cnt[1] & !B1_sdata_cnt[0] & !B1_sdata_cnt[2];


--B1L195 is hd7279:inst|key_7279[2]~195 at LC_X31_Y10_N2
--operation mode is normal