文件頭:




#include "wireless.h"



/* 定時器0中斷服務子程序 */

void timer() interrupt 1 using 2

{   

    Flag_Delay5ms = 0;

    TH0 = -5000/256;

    TL0 = -5000%256;	

}



void main(void)

{

    ClearT_buf();

    ClearR_buf();

    TXEN = 0;                   //初始為接收狀態

    PWR = 1;                	//正常工作模式

    CS = 0;                 	//選擇頻道0

    EA=0;

    	

    /* 11.0592MHz下，設置串行口9600波特率，工作方式1

        8位數據位，1位停止位，無奇偶校驗，*/

    TMOD = 0x21;                //定時器1工作模式1，定時器0工作模式2	

    SCON = 0x50;                //串行口工作方式1，REN=1

    PCON = 0x00;            	//SMOD=0



    TL1 = 0xfd;

    TH1 = 0xfd;	

    TR1=1;                      //定時器1開始計時	

    

    PT0 = 1;                    //定時器0高優先級

    TH0 = -5000/256;        	//5ms

    TL0 = -5000%256;

    	

    IE = 0x90;                  //EA=1,ES=1:打開串口中斷

    

    while (1) 

    {

        if (Flag_ReqSend)       //收到“請求發送
void Send(void)

{

    uchar xdata j = 0;

    uchar xdata len = 0;

    uchar xdata CheckSum = 0 ;

    t_buf[0]=0x24;          	//起始位

    t_buf[1]=0x07;              //7個數據字節

    len=t_buf[1];

    CheckSum = CheckSum + len;

    for ( j=0;j++;j<len)

    {

        t_buf[j+2] = Data[j];

        CheckSum = CheckSum + t_buf[j+2];

    }

    t_buf[9] = CheckSum;        //校驗和字節

    t_buf[10] = 0x2A;           //停止位

    

    for (j=0;j++;j<11)

    {

        TI =0 ;

        SBUF = t_buf[j];	

        while ( TI ==0 );

        TI =0 ;	

    }

}



//通知PC機端發送結束函數

void SendOver(void)

{

    TI =0 ;

    SBUF = 0x24;	

    while ( TI ==0 );

    TI =0 ;			

    SBUF = 0x01;	

    while ( TI ==0 );

    TI =0 ;	

    SBUF = SEND_OVER;           //通知PC機端“發送結束”	

    while ( TI ==0 );

    TI =0 ;	

    SBUF = 0x99;                //校驗和字節	

    while ( TI ==0 );

    TI =0 ;		

    SBUF = 0x2A;	

    while ( TI ==0 );

    TI =0 ;		

}