?? txtsetup.oem
字號:
;
; format for txtsetup.oem.
;
; Follow this format for non-PNP adapters ISA
;
; Follow the txtsetup.oem in initio for PNP adapters like PCI and ISAPNP
;
; Txtsetup.oem is a generic way to install Storage adapters to get them through
; textmode setup. Do as little as possible and allow GUI mode setup to do the
; remaining work using the supplied inf.
;
; General format:
;
; [section]
; key = value1,value2,...
;
;
; The hash ('#') or semicolon (';') introduces a comment.
; Strings with embedded spaces, commas, or hashes should be double-quoted
;
; This section lists all disks in the disk set.
;
; <description> is a descriptive name for a disk, used when
; prompting for the disk
; <tagfile> is a file whose presence allows setup to recognize
; that the disk is inserted.
; <directory> is where the files are located on the disk.
;
[Disks]
d1 = "OEM DISK (SCSI)",\disk1,\
; This section lists the default selection for each 'required'
; hardware component. If a line is not present for a component,
; the default defaults to the first item in the [<component_name>]
; section (see below).
;
; <component_name> is one of computer, display, keyboard, mouse, scsi
; <id> is a unique <within the component> string to be associated
; with an option.
[Defaults]
scsi = OEMSCSI
; This section lists the options available for a particular component.
;
; <id> is the unique string for the option
; <description> is a text string, presented to the user in a menu
; <key_name> gives the name of the key to be created for the component in
; HKEY_LOCAL_MACHINE\ControlSet001\Services
[scsi]
OEMSCSI = "OEM SCSI for Adaptec 154x/164x"
; This section lists the files that should be copied if the user
; selects a particular component option.
;
; <file_type> is one of driver, port, class, dll, hal, inf, or detect.
; See below.
; <source_disk> identifies where the file is to be copied from, and must
; match en entry in the [Disks] section.
; <filename> is the name of the file. This will be appended to the
; directory specified for the disk in the [Disks] section to form the
; full path of the file on the disk.
; <driverkey> this is the name that will show under the services\driver key
; this should be the same name as the driver that is being installed.
[Files.scsi.OEMSCSI]
driver = d1,aha15OEM.sys,aha15OEM
inf = d1,aha154x.inf
catalog = d1,aha154x.cat
; This section specifies values to be set in the registry for
; particular component options. Required values in the services\xxx
; key are created automatically -- use this section to specify additional
; keys to be created in services\xxx and values in services\xxx and
; services\xxx\yyy.
;
; This section must be filled out for storage controllers that
; are PNP adapters like PCI and ISA PNP adapters. Failure to do this
; can cause the driver to fail to load. Must also add the section
; [HardwareIds.scsi.ID] to identify the supported ID's.
;
; <value_name> specifies the value to be set within the key
; <value_type> is a string like REG_DWORD. See below.
; <value> specifies the actual value; its format depends on <value_type>
;
[Config.aha15OEM]
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -