?? tsteyes2.m
字號:
function [ret,x0,str,ts,xts]=tsteyes2(t,x,u,flag);
%TSTEYES2 is the M-file description of the SIMULINK system named TSTEYES2.
% The block-diagram can be displayed by typing: TSTEYES2.
%
% SYS=TSTEYES2(T,X,U,FLAG) returns depending on FLAG certain
% system values given time point, T, current state vector, X,
% and input vector, U.
% FLAG is used to indicate the type of output to be returned in SYS.
%
% Setting FLAG=1 causes TSTEYES2 to return state derivatives, FLAG=2
% discrete states, FLAG=3 system outputs and FLAG=4 next sample
% time. For more information and other options see SFUNC.
%
% Calling TSTEYES2 with a FLAG of zero:
% [SIZES]=TSTEYES2([],[],[],0), returns a vector, SIZES, which
% contains the sizes of the state vector and other parameters.
% SIZES(1) number of states
% SIZES(2) number of discrete states
% SIZES(3) number of outputs
% SIZES(4) number of inputs
% SIZES(5) number of roots (currently unsupported)
% SIZES(6) direct feedthrough flag
% SIZES(7) number of sample times
%
% For the definition of other parameters in SIZES, see SFUNC.
% See also, TRIM, LINMOD, LINSIM, EULER, RK23, RK45, ADAMS, GEAR.
% Note: This M-file is only used for saving graphical information;
% after the model is loaded into memory an internal model
% representation is used.
% the system will take on the name of this mfile:
sys = mfilename;
new_system(sys)
simver(1.3)
if (0 == (nargin + nargout))
set_param(sys,'Location',[192,119,907,259])
open_system(sys)
end;
set_param(sys,'algorithm', 'RK-45')
set_param(sys,'Start time', '0.0')
set_param(sys,'Stop time', '999999')
set_param(sys,'Min step size', '0.0001')
set_param(sys,'Max step size', '10')
set_param(sys,'Relative error','1e-3')
set_param(sys,'Return vars', '')
set_param(sys,'Load callback','M=16;td=.1;ts=.01;Fc=100/pi/2;[num,den]=butter(5,Fc*2*ts);');
% Subsystem ['QAM',13,'baseband'].
new_system([sys,'/',['QAM',13,'baseband']])
set_param([sys,'/',['QAM',13,'baseband']],'Location',[321,500,954,793])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/R1']])
set_param([sys,'/',['QAM',13,'baseband/R1']],...
'position',[190,15,195,20])
add_block('built-in/Product',[sys,'/',['QAM',13,'baseband/Product']])
set_param([sys,'/',['QAM',13,'baseband/Product']],...
'position',[300,33,330,57])
add_block('built-in/Product',[sys,'/',['QAM',13,'baseband/Product1']])
set_param([sys,'/',['QAM',13,'baseband/Product1']],...
'position',[300,93,330,117])
add_block('built-in/Sum',[sys,'/',['QAM',13,'baseband/Sum']])
set_param([sys,'/',['QAM',13,'baseband/Sum']],...
'inputs','+-',...
'position',[375,60,395,80])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/R_out']])
set_param([sys,'/',['QAM',13,'baseband/R_out']],...
'position',[445,45,450,50])
add_block('built-in/Mux',[sys,'/',['QAM',13,'baseband/RI2C']])
set_param([sys,'/',['QAM',13,'baseband/RI2C']],...
'inputs','2',...
'Mask Display','Real/Imag\nto Complex',...
'Mask Type','Real/Imag to Complex',...
'Mask Dialogue','Construct complex vector from real and imaginary vectors.')
set_param([sys,'/',['QAM',13,'baseband/RI2C']],...
'Mask Help','The Real/Imag to Complex block creates a complex output from the two inputs. It uses a Mux block to append the complex part (input 2) to the real part (input 1).')
set_param([sys,'/',['QAM',13,'baseband/RI2C']],...
'position',[470,119,545,161])
add_block('built-in/Inport',[sys,'/',['QAM',13,'baseband/in_1']])
set_param([sys,'/',['QAM',13,'baseband/in_1']],...
'position',[95,30,115,50])
add_block('built-in/Outport',[sys,'/',['QAM',13,'baseband/out_1']])
set_param([sys,'/',['QAM',13,'baseband/out_1']],...
'position',[585,130,605,150])
add_block('built-in/Constant',[sys,'/',['QAM',13,'baseband/Constant']])
set_param([sys,'/',['QAM',13,'baseband/Constant']],...
'Value','x1',...
'position',[80,145,100,165])
add_block('built-in/Constant',[sys,'/',['QAM',13,'baseband/Constant1']])
set_param([sys,'/',['QAM',13,'baseband/Constant1']],...
'Value','x2',...
'position',[130,165,150,185])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/I1']])
set_param([sys,'/',['QAM',13,'baseband/I1']],...
'position',[193,43,198,48])
add_block('built-in/Inport',[sys,'/',['QAM',13,'baseband/in_2']])
set_param([sys,'/',['QAM',13,'baseband/in_2']],...
'Port','2',...
'position',[135,55,155,75])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/R2']])
set_param([sys,'/',['QAM',13,'baseband/R2']],...
'position',[125,135,130,140])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/I2']])
set_param([sys,'/',['QAM',13,'baseband/I2']],...
'position',[190,155,195,160])
add_block('built-in/Product',[sys,'/',['QAM',13,'baseband/Product3']])
set_param([sys,'/',['QAM',13,'baseband/Product3']],...
'position',[310,183,340,207])
add_block('built-in/Product',[sys,'/',['QAM',13,'baseband/Product2']])
set_param([sys,'/',['QAM',13,'baseband/Product2']],...
'position',[310,228,340,252])
add_block('built-in/Sum',[sys,'/',['QAM',13,'baseband/Sum1']])
set_param([sys,'/',['QAM',13,'baseband/Sum1']],...
'position',[385,210,405,230])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/I_out']])
set_param([sys,'/',['QAM',13,'baseband/I_out']],...
'position',[445,206,450,211])
add_block('built-in/Note',[sys,'/',['QAM',13,'baseband/Ref: Hambley: An Intro to Comm. Systems. pp72']])
set_param([sys,'/',['QAM',13,'baseband/Ref: Hambley: An Intro to Comm. Systems. pp72']],...
'position',[260,370,265,375])
add_line([sys,'/',['QAM',13,'baseband']],[550,140;580,140])
add_line([sys,'/',['QAM',13,'baseband']],[345,240;355,240;355,225;380,225])
add_line([sys,'/',['QAM',13,'baseband']],[345,195;355,195;355,215;380,215])
add_line([sys,'/',['QAM',13,'baseband']],[160,65;245,65;245,100;295,100])
add_line([sys,'/',['QAM',13,'baseband']],[250,100;250,245;305,245])
add_line([sys,'/',['QAM',13,'baseband']],[155,175;280,175;280,110;295,110])
add_line([sys,'/',['QAM',13,'baseband']],[280,175;280,200;305,200])
add_line([sys,'/',['QAM',13,'baseband']],[105,155;270,155;270,50;295,50])
add_line([sys,'/',['QAM',13,'baseband']],[270,155;270,235;305,235])
add_line([sys,'/',['QAM',13,'baseband']],[120,40;295,40])
add_line([sys,'/',['QAM',13,'baseband']],[238,40;238,190;305,190])
add_line([sys,'/',['QAM',13,'baseband']],[335,105;345,105;345,75;370,75])
add_line([sys,'/',['QAM',13,'baseband']],[335,45;345,45;345,65;370,65])
add_line([sys,'/',['QAM',13,'baseband']],[400,70;425,70;425,130;465,130])
add_line([sys,'/',['QAM',13,'baseband']],[410,220;425,220;425,150;465,150])
set_param([sys,'/',['QAM',13,'baseband']],...
'Mask Display','plot(0,0,100,100,x,y,u,v);QAM',...
'Mask Type','QM DSB-SC AM CE')
set_param([sys,'/',['QAM',13,'baseband']],...
'Mask Dialogue','Modulate the in-phase and quadrature\ncomponent signal from the 1st and 2nd\ninput ports, baseband simulation.|Initial phase (rad):')
set_param([sys,'/',['QAM',13,'baseband']],...
'Mask Translate','Ph=@1;x1=cos(Ph);x2=sin(Ph);[x,y]=moduicon(1);[u,v]=cmplxicn(1,50,get_param(gcb,''orientation''));')
set_param([sys,'/',['QAM',13,'baseband']],...
'Mask Help','This block outputs the complex envelope of the quadratic multiplexed double-sideband suppressed-carrier amplitude modulated signal. The 1st and 2nd input ports input the in-phase and quadrature components. The output is a complex signal.')
set_param([sys,'/',['QAM',13,'baseband']],...
'Mask Entries','0\/')
% Finished composite block ['QAM',13,'baseband'].
set_param([sys,'/',['QAM',13,'baseband']],...
'hide name',0,...
'position',[225,58,305,102])
% Subsystem ['QASK',13,'square-map'].
new_system([sys,'/',['QASK',13,'square-map']])
set_param([sys,'/',['QASK',13,'square-map']],'Location',[214,372,642,541])
add_block('built-in/Look Up Table',[sys,'/',['QASK',13,'square-map/c-y axis']])
set_param([sys,'/',['QASK',13,'square-map/c-y axis']],...
'Input_Values','z',...
'Output_Values','y',...
'position',[245,90,280,120])
add_block('built-in/Outport',[sys,'/',['QASK',13,'square-map/out_2']])
set_param([sys,'/',['QASK',13,'square-map/out_2']],...
'Port','2',...
'position',[325,95,345,115])
add_block('built-in/Look Up Table',[sys,'/',['QASK',13,'square-map/s-x axis']])
set_param([sys,'/',['QASK',13,'square-map/s-x axis']],...
'Input_Values','z',...
'Output_Values','x',...
'position',[245,25,280,55])
add_block('built-in/Outport',[sys,'/',['QASK',13,'square-map/out_1']])
set_param([sys,'/',['QASK',13,'square-map/out_1']],...
'position',[325,30,345,50])
add_block('built-in/Zero-Order Hold',[sys,'/',['QASK',13,'square-map/Zero-Order',13,'Hold']])
set_param([sys,'/',['QASK',13,'square-map/Zero-Order',13,'Hold']],...
'Sample time','td',...
'position',[110,24,145,56])
add_block('built-in/Inport',[sys,'/',['QASK',13,'square-map/in_1']])
set_param([sys,'/',['QASK',13,'square-map/in_1']],...
'position',[45,30,65,50])
add_line([sys,'/',['QASK',13,'square-map']],[70,40;105,40])
add_line([sys,'/',['QASK',13,'square-map']],[150,40;240,40])
add_line([sys,'/',['QASK',13,'square-map']],[185,40;185,105;240,105])
add_line([sys,'/',['QASK',13,'square-map']],[285,105;320,105])
add_line([sys,'/',['QASK',13,'square-map']],[285,40;320,40])
set_param([sys,'/',['QASK',13,'square-map']],...
'Mask Display','QASK\nS-map',...
'Mask Type','QASK S-map')
set_param([sys,'/',['QASK',13,'square-map']],...
'Mask Dialogue','Use square constellation to map the\ninput digital signal into in-phase and\nquadrature components. M must be\nM=2^K with integer K.|M-ary number (input integers in range [0, M-1]):|Input symbol interval and offset (sec):')
set_param([sys,'/',['QASK',13,'square-map']],...
'Mask Translate','N=@1;Ac=1;td=@2;z=[[1:N];[1:N]];z=z(:);[x,y]=qaskenco(z-1,N);z=z-1.5;z=[z(2:2*N);N-.5];x=x/max(x);y=y/max(y);')
set_param([sys,'/',['QASK',13,'square-map']],...
'Mask Help','This block maps a digital signal onto in-phase and quadratic components, which are outputs in the first and second output port respectively. The M-ary number must be M=2^K with integer K. The input symbol interval can be a two-element vector with the second element being offset. The default value offset is 0. The maximum amplitudes for the outputs are 1.')
set_param([sys,'/',['QASK',13,'square-map']],...
'Mask Entries','M\/td\/')
% Finished composite block ['QASK',13,'square-map'].
set_param([sys,'/',['QASK',13,'square-map']],...
'hide name',0,...
'position',[120,58,200,102])
% Subsystem ['QADM',13,'baseband'].
new_system([sys,'/',['QADM',13,'baseband']])
set_param([sys,'/',['QADM',13,'baseband']],'Location',[283,122,827,462])
add_block('built-in/Inport',[sys,'/',['QADM',13,'baseband/in_1']])
set_param([sys,'/',['QADM',13,'baseband/in_1']],...
'position',[55,115,75,135])
add_block('built-in/Constant',[sys,'/',['QADM',13,'baseband/Constant1']])
set_param([sys,'/',['QADM',13,'baseband/Constant1']],...
'Value','x2',...
'position',[160,245,180,265])
add_block('built-in/Sum',[sys,'/',['QADM',13,'baseband/Sum1']])
set_param([sys,'/',['QADM',13,'baseband/Sum1']],...
'position',[340,220,360,240])
add_block('built-in/Outport',[sys,'/',['QADM',13,'baseband/out_2']])
set_param([sys,'/',['QADM',13,'baseband/out_2']],...
'Port','2',...
'position',[485,220,505,240])
add_block('built-in/Filter',[sys,'/',['QADM',13,'baseband/Filter1']])
set_param([sys,'/',['QADM',13,'baseband/Filter1']],...
'Numerator','num',...
'Denominator','den',...
'Sample time','ts',...
'position',[395,211,450,249])
add_block('built-in/Product',[sys,'/',['QADM',13,'baseband/Product1']])
set_param([sys,'/',['QADM',13,'baseband/Product1']],...
'position',[260,123,290,147])
add_block('built-in/Demux',[sys,'/',['QADM',13,'baseband/Demux']])
set_param([sys,'/',['QADM',13,'baseband/Demux']],...
'outputs','2',...
'position',[120,105,160,140])
add_block('built-in/Constant',[sys,'/',['QADM',13,'baseband/Constant']])
set_param([sys,'/',['QADM',13,'baseband/Constant']],...
'Value','x1',...
'position',[155,40,175,60])
add_block('built-in/Product',[sys,'/',['QADM',13,'baseband/Product2']])
set_param([sys,'/',['QADM',13,'baseband/Product2']],...
'position',[270,238,300,262])
add_block('built-in/Product',[sys,'/',['QADM',13,'baseband/Product3']])
set_param([sys,'/',['QADM',13,'baseband/Product3']],...
'position',[270,193,300,217])
add_block('built-in/Sum',[sys,'/',['QADM',13,'baseband/Sum']])
set_param([sys,'/',['QADM',13,'baseband/Sum']],...
'inputs','+-',...
'position',[335,70,355,90])
add_block('built-in/Product',[sys,'/',['QADM',13,'baseband/Product']])
set_param([sys,'/',['QADM',13,'baseband/Product']],...
'position',[260,43,290,67])
add_block('built-in/Filter',[sys,'/',['QADM',13,'baseband/Filter']])
set_param([sys,'/',['QADM',13,'baseband/Filter']],...
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -