#ifndef AT89CX051_HEADER_FILE
#define AT89CX051_HEADER_FILE 1
//Byte 寄存器
sfr SP      = 0x81;
sfr DPL     = 0x82;
sfr DPH     = 0x83;
sfr PCON    = 0x87;
sfr TCON    = 0x88;
sfr TMOD    = 0x89;
sfr TL0     = 0x8A;
sfr TL1     = 0x8B;
sfr TH0     = 0x8C;
sfr TH1     = 0x8D;
sfr P1      = 0x90;
sfr SCON    = 0x98;
sfr SBUF    = 0x99;
sfr IE      = 0xA8;
sfr P3      = 0xB0;
sfr IP      = 0xB8;
sfr PSW     = 0xD0;
sfr ACC     = 0xE0;
sfr B       = 0xF0;
//PCON 
#define IDL_    0x01
#define STOP_   0x02
#define EWT_    0x04
#define EPFW_   0x08
#define WTR_    0x10
#define PFW_    0x20
#define POR_    0x40
#define SMOD_   0x80

//TCON 
sbit IT0  = 0x88;
sbit IE0  = 0x89;
sbit IT1  = 0x8A;
sbit IE1  = 0x8B;
sbit TR0  = 0x8C;
sbit TF0  = 0x8D;
sbit TR1  = 0x8E;
sbit TF1  = 0x8F;

//TMOD值
#define T0_M0_   0x01
#define T0_M1_   0x02
#define T0_CT_   0x04
#define T0_GATE_ 0x08
#define T1_M0_   0x10
#define T1_M1_   0x20
#define T1_CT_   0x40
#define T1_GATE_ 0x80

#define T1_MASK_ 0xF0
#define T0_MASK_ 0x0F

//P1 
sbit P1_0 = 0x90;
sbit P1_1 = 0x91;
sbit P1_2 = 0x92;
sbit P1_3 = 0x93;
sbit P1_4 = 0x94;
sbit P1_5 = 0x95;
sbit P1_6 = 0x96;
sbit P1_7 = 0x97;

sbit AIN0 = 0x90;                 // + 輸入 
sbit AIN1 = 0x91;                 //- 輸入 

//SCON 
sbit RI   = 0x98;
sbit TI   = 0x99;
sbit RB8  = 0x9A;
sbit TB8  = 0x9B;
sbit REN  = 0x9C;
sbit SM2  = 0x9D;
sbit SM1  = 0x9E;
sbit SM0  = 0x9F;

//IE
sbit EX0  = 0xA8;         // 開INT0 
sbit ET0  = 0xA9;         // 開ET0 
sbit EX1  = 0xAA;         // 開INT1 
sbit ET1  = 0xAB;         // Timer 1 
sbit ES   = 0xAC;         // 開ES 
sbit ET2  = 0xAD;         // Timer 2 

sbit EA   = 0xAF;         // 關中斷 

//P3
sbit P3_0 = 0xB0;
sbit P3_1 = 0xB1;
sbit P3_2 = 0xB2;
sbit P3_3 = 0xB3;
sbit P3_4 = 0xB4;
sbit P3_5 = 0xB5;
sbit P3_7 = 0xB7;

sbit RXD  = 0xB0;                // 串行收中斷 
sbit TXD  = 0xB1;                //串行發中斷
sbit INT0 = 0xB2;                 // INT0 
sbit INT1 = 0xB3;                 // INT11 
sbit T0   = 0xB4;                 // Timer 0  
sbit T1   = 0xB5;                 // Timer 1 
sbit AOUT = 0xB6;                // 模擬輸出

//IP
sbit PX0  = 0xB8;
sbit PT0  = 0xB9;
sbit PX1  = 0xBA;
sbit PT1  = 0xBB;
sbit PS   = 0xBC;

//PSW 
sbit P    = 0xD0;
sbit FL   = 0xD1;
sbit OV   = 0xD2;
sbit RS0  = 0xD3;
sbit RS1  = 0xD4;
sbit F0   = 0xD5;
sbit AC   = 0xD6;
sbit CY   = 0xD7;

//中斷地址= (Number * 8) + 3
#define IE0_VECTOR	0                    // 0x03 INT0 
#define TF0_VECTOR	1                    // 0x0B Timer 0 
#define IE1_VECTOR	2                    // 0x13 INT11 
#define TF1_VECTOR	3                    // 0x1B Timer 1 
#define SIO_VECTOR	4                    // 0x23 串行口 

#endif

// io分配:                   			      
/* OUTPUT:                             
 P1.0 ...... 模擬量輸入			
  P1.1 ...... DA輸入比較基準電壓	
P1.2~7..... R-2R DA電阻網絡		 
P3.7 ...... LED 模擬亮度輸出		 
CPU CLOCK EQU 6M            */

//#pragma src 
#include "AT89x051.h"
#include <stdlib.h>
#include<math.h>
#include<intrins.h>

//變量類型標識的宏定義
#define	Uchar unsigned char
#define Uint unsigned int

#define Ledlight() (P3 &= 0x7f)
#define Leddark()  (P3 |= 0x80)

sbit	P36	= P3^6;		          // 比較器內部判斷腳
sbit	LED	= P3^7;		          // 一個發光二級管觀察亮度變化

// 內部標志位定義
bit	less;			              // 比較是否大于 1.小于，0.大于

// 全局變量定義
Uchar	timer1,		          // 通用延時計數器
	timer2,		              // 按鍵蜂鳴器反應定時器
	adcdata,		              // ad轉換變量
	pwm1;			          // PWM輸出比例

// 函數列表
void DelayMs(unsigned int number); // 毫秒延時
void timers0();			          // 在定時器中斷中做數碼管的掃描顯示(ct0)
void Initall(void);		          // 系統初始化
void timers1(void);		          // TC1定時器中斷用于掃描顯示與鍵盤
Uchar adcread(void);			  // adc轉換程序

void main(void)  using 0
{
	DelayMs(120);
	Initall();
	pwm1 = adcread();
	LED=1;
	while(1) 
	{
		pwm1 = adcread();
		timer2=10;
		while (timer2);
	}
}
// 毫秒延時
void DelayMs(unsigned int number) 
{
	unsigned char temp;

	for(;number!=0;number--) 
		for(temp=112;temp!=0;temp--);
}

//在定時器中斷中做LED的PWM輸出

void timers0() interrupt 1 using 1 
{
	TH0 = 0xff;
	TL0 = 0xd0;
	timer1--;
	if (timer1==pwm1)LED=0;
	if (timer1==0){
		LED=1;
		timer1=0x40;
		timer2--;
		};
}

//6位 ADC轉換
Uchar adcread(void)
{
	Uchar i=0x3f,temp=0;
	P36 =1;
	P1 = 3; _nop_();_nop_();		     //從零開始
	while ((i--)&& (P36))
		{
		temp += 4;
		P1 = temp|3;
		_nop_(); 
		}
	temp >>= 2;
	return temp;
}

//系統初始化
void Initall(void)
{
	TMOD = 0x11;		  // 0001 0001 16進制計數器
	IP = 0x8;		          // 0000 1000 t1優先
        IE = 0x8A;		  // 1000 1010 t0,t1中斷允許
	TCON = 5;		      // 0000 0101 外部中斷低電平觸發
        TR0 = 1;		      // 打開定時器中斷，IE中已經打開，在明示一下
	TR1 = 0;
        ET0 = 1;
	ET1 = 0;
        P1 = 0xff;
}
 
// TC1定時器中斷用于掃描顯示與鍵盤(ct1)
void timers1(void) interrupt 3 using 2 
{
_nop_();		                   //實驗中沒有啟用
}