/* * include/asm-arm/arch-at91/at91_adc.h * * Copyright (C) SAN People * * Analog-to-Digital Converter (ADC) registers. * Based on AT91SAM9260 datasheet revision D. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */#ifndef AT91_ADC_H#define AT91_ADC_H#define AT91_ADC_CR		0x00		/* Control Register */#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */#define AT91_ADC_MR		0x04		/* Mode Register */#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */#define			AT91_ADC_TRGSEL_TC0		(0 << 1)#define			AT91_ADC_TRGSEL_TC1		(1 << 1)#define			AT91_ADC_TRGSEL_TC2		(2 << 1)#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */#define			AT91_ADC_PRESCAL_(x)	((x) << 8)#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */#define			AT91_ADC_STARTUP_(x)	((x) << 16)#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */#define			AT91_ADC_SHTIM_(x)	((x) << 24)#define AT91_ADC_CHER		0x10		/* Channel Enable Register */#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */#define AT91_ADC_CHSR		0x18		/* Channel Status Register */#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */#define AT91_ADC_SR		0x1C		/* Status Register */#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */#define		AT91_ADC_LDATA		(0x3ff)#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */#define		AT91_ADC_DATA		(0x3ff)#endif