lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke.	* Removed some unused prototypes from lpfc_crtn.h -	  lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn,	  lpfc_scsi_issue_inqp0, lpfc_scsi_timeout_handler.	* Integrated patch from Christoph Hellwig: remove TRUE/FALSE	  usage.	* Integrated patch from Christoph Hellwig: Remove unused function	  prototypes lpfc_set_pkt_len and lpfc_get_pkt_data from	  lpfc_crtn.h - fixes build warnings.	* Removed unused struct lpfc_dmabufip definition from lpfc_mem.h.	* Removed pre-2.6.5 MODULE_VERSION macro from lpfc_compat.h.	* Fixing missing static and removing dead code.	* Adding nodewwn, portwwn and portfcid shost attributes.	* Initial support for CT via sysfs. request payloads of size less	  than PAGE_SIZE and rsp payloads of size PAGE_SIZE are supported.	  Driver maintains a list of rsp's and passes back rsp's	  corresponding to the pid of the calling process.	* Support for RefreshInformation, GetAdapterAttributes,	  GetPortStatistics.	* Make nodev-tmo default to 20 seconds.	* Fix up some DSM error cases, unreg_login rpi where needed.	* Fix up comments for fc_target_block / fc_target_unblock.	* Fix up code for scsi_block_requests / scsi_unblock_requests.	* Add NLP_FCP_TARGET for nodeinfo support.	* Move suspend/resume in lpfc_nlp_list under appropriate case -	  Used host_lock for DPC to avoid race (remove dpc_lock)	* Fix some corner cases for PLOGI receive - simplify error case	  for cmpl_reglogin_reglogin_issue.	* Bug fix for ppc64 EEH MMIO panic - always do readl after	  writel's of HBA registers to force flush.	* Get rid of initial static routine declarations in lpfc_hbadisc.c	  and lpfc_els.c.	* Updates to discovery processing.Changes from 20040823 to 20040908	* Changed version number to 8.0.11	* Removed persistent binding code.	* Display both ASC and ASCQ info.	* Fixed link down->up transitions when linkdown tmo expires. Fix	  was in the defensive error checking at the start of	  queuecommand.	* Removed lpfc_scsi_timeout_handler as this timer is no longer	  required.  The midlayer will exhaust retries and then call	  lpfc_abort_handler, lpfc_reset_lun_handler, and	  lpfc_reset_target_handler.	* Minimal support for SCSI flat space addressing/volume set	  addressing.  Use 16 bits of LUN address so that flat	  addressing/VSA will work.	* Changed 2 occurences of if( 1 != f(x)) to if(f(x) != 1)	* Drop include of lpfc_cfgparm.h.	* Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c.	* Add minimum range checking property to /sys write/store	  functions.	* Fix display of node_name and port_name via fc transport	  attr.	* Removed biosparam code.	* Removed range checking. phba->config[] array elements are now	  embedded into the hba struct. lpfc_config_setup() has been	  removed.	* Collapsed lpfc_scsi_cmd_start into lpfc_queuecommand and cleaned	  up combined routines.	* Removed unused prototypes myprint and	  lpfc_sched_service_high_priority_queue.	* Removed unused function lpfc_nodev.	* Removed scsi_cmnd->timeout_per_command cancelation. SCSI midlayer	  now times out all commands - FW is instructed to not timeout.	* Removed polling code from lpfc_scsi_cmd_start. Reorganized	  queuecommand and cmd_start some.Changes from 20040810 to 20040823	* Changed version number to 8.0.10	* Additional timer changes as per Arjan / Christoph's comments.	* Used mod_timer() instead of del_timer_sync() where appropriate.	* Fixed a use after free case (panic on 2.6.8.1 with	  CONFIG_DEBUG_SLAB set).	* Fix compile warning in lpfc_fcp.c.	* Minor fix for log message, that prints unassigned brdno which is	  zero.	* Move scsi_host_alloc() to the beginning of probe_one(). This	  ensures that host_lock is available at later stages and also	  avoids tons of unnecessary initializing if host_alloc()	  fails.	* Removed else clause from lpfc_slave_configure that set	  sdev->queue_depth.  The driver informs the midlayer of its	  setting in the template and only overrides if queue tagging is	  enabled.	* Added PCI_DEVICE_ID_ZEPHYR and PCI_DEVICE_ID_ZFLY (Junior	  Zephyr) supportChanges from 20040730 to 20040810		* Changed version number to 8.0.9	* Removed per HBA driver lock.  Driver now uses the host->host_lock	* Restored support for the 2.6.5 kernel for those linux distributions	  shipped with the 2.6.5 kernel.	* Applied patch from Christoph Hellwig (hch@infradead.org) as follows	  "[PATCH] use scsi host private data in ->proc_info.  	* Applied patch from Christoph Hellwig (hch@infradead.org) as follows	  "Re: [Emulex] Ready for next round.  This patch cleans up the memory 	  allocation routines a little and fixes a missing mempool_destroy and	  some missing error handling."	* Changed pointers assignments from 0 to NULL.	* Added fixes to the lpfc_reset_lun_handler and lpfc_reset_bus_handler	  entry points that caused kernel to Oops or hang.	* Added fixes to targetless hosts that caused modprobe and insmod to hang.	* Ongoing cleanup to many files	  Changes from 20040723 to 20040730	* Changed version number to 8.0.8	* Removed unused LPFN_DRIVER_VERSION #define.	* Folded lpfc_findnode_scsiid into lpfc_find_target, its only	  caller.	* Removed 2 unneeded arguments to lpfc_find_target (lun and	  create_flag).	* Make lpfc_sli_reset_on_init = 1	* Minor cleanup to quieten sparse.	* Removed missing function = 0 in tmo routine in lpfc_els.c.	* Moved additional binding parameters into lpfc_defaults.c:	  lpfc_automap / lpfc_fcp_bind_method	* Use msecs_to_jiffies() where applicable.	* Only use queue depth attribute only after SLI HBA setup was	  completed.	* Put in memory barriers for PPC	* Added PCI_DEVICE_ID_HELIOS and PCI_DEVICE_ID_JFLY (Junior	  Helios) support	* Added 4&10 gigabit choices in user option link_speed	* Updated timer logic: Set timer data after init_timer use	  timer_pending() instead of expires.	* Removed some remnants of IP over FC support from Kconfig and	  Makefile.	* Remove redundant prototypes for lpfc_handle_eratt,	  lpfc_handle_latt and lpfc_read_pci.	* Ongoing cleanup of lpfc_init.c.	* Changed LPFC_CFG_DFT_HBA_Q_DEPTH -> LPFC_CFG_HBA_Q_DEPTH.	* Another cleanup stab at lpfc_ct.c. Remove castings, structure	  code sanely, remove redundant code, reorganize code so that	  functions are invoked after definition.Changes from 20040716 to 20040723	* Changed version number to 8.0.7	* Cleanup of lpfc_ct.c. Removed number of casts, removed tons of	  dead/redundant code, cleaned up badly and poorly written code,	  cleaned up return values.	* Fixed Persistent binding implementation	* Removed all references to lpfc_scsi_req_tmo	* Removed last references to lun_skip config parameter.	* Removed LPFC_DEV_RPTLUN node failure bit because we don't issue	  REPORT_LUNS from the driver anymore.	* Removed LUN-tracking in driver.  Removed lpfc_lun struct and	  moved any functionality we still need to lpfc_target.	* Added new lpfc_jedec_to_ascii() call and replace two instances	  of duplicate code with calls to this function.	* Removed Volume Set Addressing handling on LUN IDs.	* Applied patch from Christoph Hellwig (hch@infradead.org) that	  removes dead code belonging to lpfc_build_scsi_cmnd() and its	  call path. This is related to the recently removed report_lun	  code.Changes from 20040709 to 20040716	* Changed version number to 8.0.6	* Removed internal report LUNs usage.  Removed functions:	  lpfc_disc_issue_rptlun, lpfc_disc_cmpl_rptlun,	  lpfc_disc_retry_rptlun and their use.	* Removed usused scheduler prototypes in lpfc_crtn.h	* Replace lpfc_geportname() with generic memcmp().	* Rearrange code in lpfc_rcv_plogi_plogi_issue() to make it a	  little more readable.	* Remove redundant port_cmp != 2 check in if	  (!port_cmp) { .... if (port_cmp != 2).... }	* Clock changes: removed struct clk_data and timerList.	* Clock changes: seperate nodev_tmo and els_retry_delay into 2	  seperate timers and convert to 1 argument changed	  LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert	  ipfarp_tmo to 1 argument convert target struct tmofunc and	  rtplunfunc to 1 argument * cr_count, cr_delay and	  discovery_threads are only needed to be module_params and not	  visible via sysfs.Changes from 20040614 to 20040709	* Changed version number to 8.0.5	* Make lpfc_info static.	* Make lpfc_get_scsi_buf static.	* Print a warning if pci_set_mwi returns an error.	* Changed SERV_PARM to struct serv_parm.	* Changed LS_RJT to struct ls_rjt.	* Changed CSP to struct csp.	* Changed CLASS_PARMS to struct class_parms.	* Some cosmetic coding style cleanups to lpfc_fcp.c.	* Providing a sysfs interface that dumps the last 32	  LINK_[UP|DOWN] and RSCN events.	* Get rid of delay_iodone timer.	* Remove qfull timers and qfull logic.	* Convert mbox_tmo, nlp_xri_tmo to 1 argment clock handler	* Removed duplicate extern defs of the bind variables.	* Streamline usage of the defines CLASS2 and CLASS3, removing	  un-necessary checks on config[LPFC_CFG_FCP_CLASS].	* Moving the persistent binding variables to new file	  lpfc_defaults.c	* Changed LPFC_SCSI_BUF_t to struct lpfc_scsi_buf.	* Moved config specific code from probe_one() into	  config_setup(). Removing a redundant check on scandown value	  from bind_setup() as this is already done in config_setup().	* Changed LPFC_SLI_t to struct lpfc_sli.	* Changed FCP_CMND to struct fcp_cmnd.	* Changed FCP_RSP to struct fcp_rsp.	* Remove the need for buf_tmo.	* Changed ULP_BDE64 to struct ulp_bde64.	* Changed ULP_BDE to struct ulp_bde.	* Cleanup lpfc_os_return_scsi_cmd() and it's call path.	* Removed lpfc_no_device_delay.	* Consolidating lpfc_hba_put_event() into lpfc_put_event().	* Removed following attributes and their functionality:	  lpfc_extra_io_tmo, lpfc_nodev_holdio, lpfc_delay_rsp_err,	  lpfc_tgt_queue_depth and lpfc_check_cond_err.	* Clock changes consolidating timers, just in the struct lpfc_hba,	  to get rid of clkData and pass only one argument to timeout	  routine. Also, removing need for outstanding clock linked list	  to stop these timers at rmmod.	* Move lpfc.conf contents into lpfc_fcp.c. Removing per adapter	  attributes in favor of global attributes.	* Fix a potential null pointer reference of pmbuf in lpfc_ct.c.	* On reset_lun, issue LUN_RESET as opposed to ABORT_TASK_SET.	* Removed SCSI_REQ_TMO related code.	* Introducing two new defines LPFC_ATTR_R and LPFC_ATTR_RW that do	  a module_param, MODULE_PARM_DESC, lpfc_param_show,	  [lpfc_param_store] and CLASS_DEVICE_ATTRIBUTE.	* Properly clean up when allocation of a linked BDE fails in the	  SCSI queuecommand path.	* Fail SCSI command if dma_map_sg call fails.	* Remove unused macros SWAP_ALWAYS and SWAP_ALWAYS16.	* Reset context2 to 0 on exit in	  lpfc_sli_issue_iocb_wait_high_priority() and	  lpfc_sli_issue_iocb_wait().	* Arranging lpfc_scsiport.c to follow style of use after	  definition. This removes the need for the cruft of forward	  declarations. Also removing a redundant #define ScsiResult as it	  already available elsewhere.	* Applying "Streamline lpfc error handling" patch from Christoph	  Hellwig (hch@infradead.org) with following modifications: fix	  mem leaks, remove some misplaced code that need not be there,	  print a message on exit (old code prints two (entry/exit)), make	  ret values consistent (either 1/0 or SUCCESS/FAILURE), keep all	  eh routines in a single file (lpfc_scsiport.c).	* Move contents of lpfc_module_param.h into lpfc_fcp.c.	* Changed sysfs attributes to CLASS_DEVICE_ATTRIBUTES (previously	  DEVICE_ATTRIBUTES). They now appear in	  /sys/class/scsi_host/hostx (previously in	  /sys/bus/pci/drivers/lpfc/devx).	* Removed lpfc_syfs.h and lpfc_sysfs.c.	* Cleanup of config params.  Throttle params have been removed.	  max_lun has been removed. max_target is replaced with a #define,	  lun_skip is removed.  Remove ipfc config params and related	  code.	* Changed DMABUF_t usage to struct lpfc_dmabuf.	* Downsizing iCfgParam structure to include a_string, a_low, a_hi	  and a_default values only.	* Free SCSI buf safety memory pool on shutdown to eliminate memory	  leak.	* Change lpfc_printf_log to a #define. Also include phba->brd_no	  and newline in the print string rather than in the #define.	* Remove code that optionally locates Host Group Pointers in host	  memory SLIM since this is no longer needed for PPC64, once	  CONFIG_PORT uses HBA's view of its BAR0.	* Removed the forward declarations of the sli functions and	  rearranging the code in lpfc_sli.c.	* Removed the preamble functionality from logging.