#
# ABAQUS/CAE Version 6.4-1 replay file
# Internal Version: 2003_09_29-11.18.28 46457
# Run by user on Mon May 29 22:18:39 2006
#

# from driverUtils import executeOnCaeGraphicsStartup
# executeOnCaeGraphicsStartup()
#: Executing "onCaeGraphicsStartup()" in the site directory ...
from abaqus import *
from abaqusConstants import *
session.Viewport(name='Viewport: 1', origin=(0.0, 0.0), width=237.46875, 
    height=189.31640625)
session.viewports['Viewport: 1'].makeCurrent()
session.viewports['Viewport: 1'].maximize()
from driverUtils import executeOnCaeStartup
executeOnCaeStartup()
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
import part
import regionToolset
import displayGroupMdbToolset as dgm
import assembly
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: AbaqusException: in keyword *NSET, file "ex03.inp", line 16: Unknown parameter: nsel. The parameter may be misspelled, obsolete, or invalid.
#: in keyword *NSET, file "ex03.inp", line 16: The NSET parameter is required.
#:  The problem occured while while parsing the input file. Run the input file through the batch pre-processor to check for syntax errors.  
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
del mdb.models['ex03']
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: WARNING: Empty part PART-1. The problem occured while reading keyword options within part definition. 
#: WARNING: Part instance PART-1-1 references an empty part. A new part named PART-1-1 will be created from the mesh data in part instance PART-1-1. 
#: WARNING: Empty part instance PART-1-1. The problem occured while processing part PART-1. Neither the original part nor the part instance PART-1-1 contain mesh data. 
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
del mdb.models['ex03']
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: WARNING: Empty part PART-1. The problem occured while reading keyword options within part definition. 
#: WARNING: Part instance PART-1-1 references an empty part. A new part named PART-1-1 will be created from the mesh data in part instance PART-1-1. 
#: WARNING: Empty part instance PART-1-1. The problem occured while processing part PART-1. Neither the original part nor the part instance PART-1-1 contain mesh data. 
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
session.viewports['Viewport: 1'].setValues(displayedObject=None)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: WARNING: Empty part PART-1. The problem occured while reading keyword options within part definition. 
#: WARNING: Part instance PART-1-1 references an empty part. A new part named PART-1-1 will be created from the mesh data in part instance PART-1-1. 
#: WARNING: Empty part instance PART-1-1. The problem occured while processing part PART-1. Neither the original part nor the part instance PART-1-1 contain mesh data. 
#: Warning: The node set "NALL" was not imported.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
import mesh
session.viewports['Viewport: 1'].assemblyDisplay.setValues(mesh=ON)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    meshTechnique=ON)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    nodeLabels=ON)
del mdb.models['ex03']
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
session.viewports['Viewport: 1'].assemblyDisplay.setValues(mesh=OFF)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    meshTechnique=OFF)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
del mdb.models['ex03']
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
session.viewports['Viewport: 1'].assemblyDisplay.setValues(mesh=ON)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    meshTechnique=ON)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    elementLabels=ON)
import job
session.viewports['Viewport: 1'].assemblyDisplay.setValues(mesh=OFF)
session.viewports['Viewport: 1'].assemblyDisplay.meshOptions.setValues(
    meshTechnique=OFF)
mdb.Job(name='Job-1', model='ex03', type=ANALYSIS, explicitPrecision=SINGLE, 
    nodalOutputPrecision=SINGLE, description='', 
    parallelizationMethodStandard=TREE, parallelizationMethodExplicit=LOOP, 
    multiprocessingMode=THREADS, numDomains=1, userSubroutine='', numCpus=1, 
    preMemory=256.0, standardMemory=256.0, standardMemoryPolicy=MODERATE, 
    scratch='', echoPrint=OFF, modelPrint=OFF, contactPrint=OFF, 
    historyPrint=OFF)
mdb.jobs['Job-1'].submit()
#: The job input file "Job-1.inp" has been submitted for analysis.
#: Error in job Job-1: 10 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
#: Error in job Job-1: Solver input file processor exited with an error - please see the data file for possible error messages if the file exists.
#: Job Job-1 aborted due to errors.
del mdb.jobs['Job-1']
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.Job(name='Job-1', model='ex03', type=ANALYSIS, explicitPrecision=SINGLE, 
    nodalOutputPrecision=SINGLE, description='', 
    parallelizationMethodStandard=TREE, parallelizationMethodExplicit=LOOP, 
    multiprocessingMode=THREADS, numDomains=1, userSubroutine='', numCpus=1, 
    preMemory=256.0, standardMemory=256.0, standardMemoryPolicy=MODERATE, 
    scratch='', echoPrint=ON, modelPrint=OFF, contactPrint=OFF, 
    historyPrint=OFF)
mdb.jobs['Job-1'].submit()
#: The job input file "Job-1.inp" has been submitted for analysis.
#: Error in job Job-1: 16 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
#: Error in job Job-1: Solver input file processor exited with an error - please see the data file for possible error messages if the file exists.
#: Job Job-1 aborted due to errors.
Mdb()
#: A new model database has been created.
#: The model "Model-1" has been created.
session.viewports['Viewport: 1'].setValues(displayedObject=None)
a = mdb.models['Model-1'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)
mdb.ModelFromInputFile(name='ex03', inputFileName='J:/abaqus/ex03.inp')
#: The model "ex03" has been created.
#: The part "PART-1" has been imported from the input file.
#: The model "ex03" has been imported from an input file. 
#: Please scroll up to check for error and warning messages.
a = mdb.models['ex03'].rootAssembly
session.viewports['Viewport: 1'].setValues(displayedObject=a)